Magene H603

Uživatelská příručka k hrudnímu popruhu pro monitor srdečního tepu Magene H603

1. Úvod

Thank you for choosing the Magene H603 Heart Rate Monitor Chest Strap. This device is designed to provide accurate real-time heart rate tracking for your fitness activities. Please read this manual carefully to ensure proper use and maintenance of your device.

2. Konec produktuview

Klíčové vlastnosti

  • High-Performance Real-time Heart Rate Tracking: Utilizes advanced ECG processing to extract accurate heart rate data, minimizing interference from movement and sweat.
  • Split Chest Strap Design: Offers enhanced comfort and a secure fit during exercise.
  • Dlouhá výdrž baterie: Provides approximately 1000 hours of operation (based on laboratory tests; actual duration may vary).
  • ANT+ & Bluetooth Compatibility: Allows simultaneous recording with ANT+ devices and Bluetooth applications for stable data transmission.
  • IP67 Prachotěsný a vodotěsný: Designed to withstand dust and water exposure during daily use.

Co je v krabici

  • Magene H603 Heart Rate Monitor Sensor
  • Nastavitelný hrudní popruh
Image showing the Magene H603 heart rate monitor, highlighting its new features like multi-color shells, optimized hardware, improved reliability, and increased LED light interaction, compared to an older version.

Image: Magene H603 Heart Rate Monitor highlighting new features.

Close-up image of the Magene H603 heart rate monitor sensor detached from the chest strap, showcasing its split design.

Image: Magene H603 Split Chest Strap Design.

3. Nastavení

Instalace baterie

The Magene H603 uses a CR2032 coin cell battery. To install or replace the battery:

  1. Vyhledejte přihrádku na baterie na zadní straně senzoru.
  2. Use a coin to gently twist the battery cover counter-clockwise to open it.
  3. Vložte baterii CR2032 kladným pólem (+) nahoru.
  4. Zarovnejte kryt a otočte jím ve směru hodinových ručiček, abyste jej zajistili.
Image showing the Magene H603 heart rate monitor with its battery compartment open, revealing a CR2032 battery being inserted.

Image: Battery installation for the Magene H603.

Nošení monitoru srdečního tepu

For accurate readings, follow these steps to wear the chest strap:

  1. Align the heart rate module with the chest strap. The two snaps on the module should connect to the corresponding snaps on the strap.
  2. Moisten the electrode areas on the back of the chest strap with a few drops of water or electrode gel. This improves conductivity.
  3. Adjust the length of the chest strap so it fits comfortably and snugly around your chest, just below your pectoral muscles.
  4. Position the sensor module at the center of your chest, with the Magene logo facing upwards. Ensure the electrodes are firmly against your skin.
Diagram illustrating how to wear the Magene H603 heart rate monitor, showing steps for attaching the module, moistening electrodes, adjusting the strap, and proper placement on the chest for both men and women.

Image: Instructions on how to wear the Magene H603 Heart Rate Monitor.

A person wearing a red Magene heart rate monitor chest strap during exercise, demonstrating proper placement below the chest.

Image: Magene H603 Heart Rate Monitor worn by an individual.

Spárování se zařízeními

The Magene H603 supports both ANT+ and Bluetooth 4.2 for connectivity.

  1. Wear the heart rate monitor as described above. The sensor will activate automatically when it detects a heart rate.
  2. On your compatible device (e.g., cycling computer, smartwatch, smartphone app like Wahoo, Zwift, Strava, Elite HRV), go to the sensor pairing settings.
  3. Select to add a new heart rate sensor. The device should detect the Magene H603.
  4. Potvrďte párování.

Poznámka: A red LED light on the sensor indicates that the monitor is active and ready to use.

4. Návod k obsluze

Once the Magene H603 is properly worn and paired with your device, it will automatically begin transmitting heart rate data. Ensure your receiving device is within range and configured to display heart rate information.

Během cvičení

  • Monitor your heart rate on your connected device.
  • The H603 provides real-time data, allowing you to adjust your intensity as needed.
  • The advanced algorithm helps maintain accuracy even during intense movement and sweating.
Close-up image of the Magene H603 heart rate monitor sensor showing a red LED light, indicating it is active and ready for use.

Image: Red LED light indicating the sensor is ready.

5. Údržba

Čištění

To ensure longevity and hygiene, clean the chest strap after each use:

  • Detach the sensor module from the strap.
  • Rinse the chest strap under running water.
  • Wipe the sensor module with a damp cloth. Do not submerge the sensor module in water.
  • Hang the strap to dry. Do not machine wash or tumble dry.

Skladování

Store the heart rate monitor in a cool, dry place when not in use. Detach the sensor module from the strap to conserve battery life.

Péče o baterie

While the battery life is extensive, replace the CR2032 battery when the device indicates low power or fails to connect. Always dispose of used batteries responsibly.

Image depicting the Magene H603 heart rate monitor sensor being splashed with water, illustrating its IP67 dustproof and waterproof rating.

Image: Magene H603 IP67 Dustproof and Waterproof.

6. Řešení problémů

No Heart Rate Reading

  • Ensure the chest strap electrodes are moistened and making good contact with your skin.
  • Check if the sensor module is securely snapped onto the strap.
  • Zkontrolujte, zda je baterie správně nainstalována a dostatečně nabitá. V případě potřeby ji vyměňte.
  • Confirm that the sensor is active (red LED light).

Nepřesná čtení

  • Ensure the strap is worn snugly and positioned correctly on your chest.
  • Avoid wearing the sensor directly over clothing, as this can interfere with readings.
  • Interference from other electronic devices or strong electromagnetic fields can affect accuracy. Move away from such sources.

Problémy s připojením

  • Ensure Bluetooth or ANT+ is enabled on your receiving device.
  • Move the receiving device closer to the heart rate monitor.
  • Zkuste zrušit párování senzoru se zařízením a znovu jej spárovat.
  • Restartujte přijímací zařízení.

7. Specifikace

SpecifikaceHodnota
Značkažaludek
Číslo modeluH603
MateriálPlast
BarvaModrý
Kompatibilní zařízeníSmartphones, Cycling Computers, Smartwatches
Hmotnost produktu16 gramů
Životnost baterie1000 hodiny
Typ snímačeMonitor srdečního tepu
Popis baterieCR2032 (vyměnitelný)
Jazykangličtina
EU Spare Parts Availability Period1 rok
Rozměry62.3 × 35.1 × 11.5 mm
Výrobcežaludek
Číslo díluH603
Zahrnuté komponentyHrudní pásek monitoru srdečního tepu
Název typu produktuHrudní pásek monitoru srdečního tepu

8. Informace o záruce

The Magene H603 Heart Rate Monitor Chest Strap comes with a 2letá záruka výrobce. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or human-caused damage.

Uschovejte si prosím doklad o koupi pro uplatnění záruky.

9. Podpora

For further assistance, technical support, or warranty inquiries, please contact Magene customer service through their official webwebu nebo prodejce, kde jste produkt zakoupili.

You can also visit the Magene brand store for more information and product updates: Magene Brand Store

© 2023 Magene. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.