1. Úvod
Thank you for choosing the Andoer W200RGB LED Video Light. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product. Keep this manual for future reference.
2. Konec produktuview
2.1 Obsah balení
Po otevření balíku se prosím ujistěte, že jsou všechny níže uvedené položky přítomny a v dobrém stavu:
- Andoer W200RGB LED Video Light
- Nabíjecí kabel USB typu C.
- Mini stativ
- Řemínek na zápěstí
- User Manual (English and Chinese)
Image: Contents of the Andoer W200RGB LED Video Light package, showing the light, USB cable, mini tripod, and wrist strap.
2.2 Klíčové vlastnosti
- Kompaktní a přenosný design: Rod-shaped design, 20cm in length, lightweight for easy transport.
- Vysoký jas: Equipped with 184 high-quality LED beads (69 white, 69 yellow, 46 RGB) with 7W output and CRI 95+.
- RGB Colored Light Mode: 360° adjustable HUE and 0%-100% adjustable brightness for diverse colorful lighting effects.
- CCT Cold & Warm Light Mode: Wide adjustable color temperature range from 2500K to 9000K.
- 20 Special Lighting Effects: Includes ambulance, fireworks, TV, candle, party, strobe, RGB strobe, red flash, green flash, blue flash, slow HSI, fast HSI, and more.
- Vestavěná dobíjecí baterie: Integrated 3.7V 3000mAh lithium battery for extended working time, rechargeable via Type-C port.
- Magnetická záda: Built-in magnets at both ends allow for easy attachment to magnetic surfaces.
2.3 Ovládací prvky a displej
The Andoer W200RGB features intuitive controls and an LCD screen for easy operation.
Image: The control panel of the Andoer W200RGB LED Video Light, showing the power button, mode button, adjustment buttons, and LCD screen.
- Vypínač: Press and hold to turn the light on or off. Short press to switch between modes.
- Tlačítko režimu (M): Short press to cycle through CCT, HSI (RGB), and Scene modes.
- Tlačítka nahoru/dolů (▲/▼): Adjust parameters such as brightness, color temperature, HUE, or saturation depending on the selected mode.
- LCD obrazovka: Displays current settings including mode, brightness, color temperature, HUE, and battery level.
- Nabíjecí port typu C: Located at one end for charging the internal battery.
3. Nastavení
3.1 Nabíjení baterie
The Andoer W200RGB LED Video Light comes with a built-in rechargeable lithium battery. Before first use, it is recommended to fully charge the device.
- Connect the supplied USB Type-C cable to the charging port on the light.
- Druhý konec kabelu USB připojte ke standardnímu napájecímu adaptéru USB (není součástí balení) nebo k portu USB počítače.
- The LCD screen will indicate the charging status. A full charge typically takes a few hours.
Image: The Andoer W200RGB LED Video Light highlighting its internal 3.7V 3000mAh battery and Type-C charging capability.
3.2 Attaching the Mini Tripod
The included mini tripod can be attached to the 1/4-inch screw hole at the bottom of the light for stable placement.
- Locate the 1/4-inch screw hole on the bottom of the LED light.
- Screw the mini tripod securely into the screw hole.
- Adjust the tripod legs for desired height and stability.
4. Návod k obsluze
4.1 Zapnutí/vypnutí
- To turn on the light, press and hold the Power button (labeled with a circle and vertical line) for a few seconds.
- To turn off the light, press and hold the Power button again for a few seconds.
4.2 Přepínání režimů
After powering on, short press the Mode button (M) to cycle through the available lighting modes:
- CCT Mode (Color Correlated Temperature): For adjusting white light from warm to cool.
- Režim HSI (odstín, sytost, intenzita): For adjusting RGB colored light.
- Režim scény: For selecting special lighting effects.
4.3 Provoz v režimu CCT
In CCT mode, you can adjust the color temperature and brightness.
- Use the Up/Down buttons (▲/▼) to adjust the brightness from 0% to 100%.
- Short press the Power button to switch to color temperature adjustment. Use the Up/Down buttons (▲/▼) to adjust the color temperature from 2500K (warm) to 9000K (cool).
Image: Visual representation of brightness adjustments (0%, 50%, 100%) and color temperature settings (6000K, 5000K, 2800K) in CCT mode.
4.4 HSI Mode (RGB) Operation
In HSI mode, you can adjust the HUE (color), saturation, and brightness.
- Use the Up/Down buttons (▲/▼) to adjust the HUE (360° color spectrum).
- Short press the Power button to switch to saturation adjustment. Use the Up/Down buttons (▲/▼) to adjust saturation.
- Short press the Power button again to switch to brightness adjustment. Use the Up/Down buttons (▲/▼) to adjust brightness from 0% to 100%.
Image: The Andoer W200RGB LED Video Light demonstrating its RGB colorful lighting capabilities, showing different hues and brightness levels.
Image: Several Andoer W200RGB LED Video Lights illuminated in various solid RGB colors, showcasing the rod-shaped design.
4.5 Scene Mode Operation (Special Effects)
In Scene mode, you can select from 20 pre-programmed special lighting effects.
- Use the Up/Down buttons (▲/▼) to cycle through the 20 special effects.
- Some effects may have adjustable parameters (e.g., speed or intensity), which can be adjusted by short pressing the Power button and then using the Up/Down buttons.
Image: A visual guide to the 20 dynamic scene light effects, such as police car, ambulance, fireworks, TV, candle, party, strobe, and various color flashes.
4.6 Using the Magnetic Back
The Andoer W200RGB LED Video Light features built-in magnets at both ends, allowing it to be easily attached to metallic surfaces for flexible lighting setups.
- Simply place either end of the light onto a suitable magnetic surface.
- Ensure the surface is stable and can support the weight of the light.
Image: The Andoer W200RGB LED Video Light highlighting its magnetic ends, demonstrating how it can be attached to metal surfaces.
4.7 Praktické aplikace
Image: A comparison of scenes before and after using the Andoer W200RGB LED Video Light, illustrating its effectiveness in enhancing illumination for various activities.
5. Údržba
5.1 Čištění
- Před čištěním se ujistěte, že je zařízení vypnuté a odpojené od jakéhokoli zdroje napájení.
- Use a soft, dry cloth to wipe the surface of the light.
- Pro odolnou špínu lehceamphadřík opláchněte vodou. Nepoužívejte agresivní chemikálie, rozpouštědla ani abrazivní čisticí prostředky.
- Do not allow water or liquids to enter the device.
5.2 Skladování
- Světlo skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
- Pokud baterii skladujete delší dobu, nabijte ji každé tři měsíce přibližně na 50 %, aby se zachovala její životnost.
5.3 Péče o baterii
- Vyhněte se častému úplnému vybíjení baterie.
- Nevystavujte baterii vysokým teplotám ani ji nepropichujte.
- If the battery shows signs of swelling or leakage, discontinue use immediately and dispose of it properly according to local regulations.
6. Řešení problémů
If you encounter any issues with your Andoer W200RGB LED Video Light, please refer to the following common problems and solutions:
- Světlo se nerozsvítí:
- Ensure the battery is charged. Connect the light to a power source using the USB Type-C cable.
- Stiskněte a podržte tlačítko napájení po dobu několika sekund, abyste se ujistili, že se nejedná jen o krátké stisknutí.
- Light flickers or output is unstable:
- Check the battery level; low battery can cause unstable performance. Recharge if necessary.
- Ensure the light is not exposed to extreme temperatures.
- Cannot change modes or adjust parameters:
- Ensure you are pressing the correct buttons (Mode button for mode changes, Power button to cycle through adjustable parameters within a mode, Up/Down buttons for value adjustment).
- Restartujte zařízení jeho vypnutím a opětovným zapnutím.
- Baterie se nenabíjí:
- Verify the USB Type-C cable is securely connected to both the light and the power source.
- Zkuste jiný USB kabel nebo napájecí adaptér, abyste vyloučili vadné příslušenství.
- Ujistěte se, že je zdroj napájení funkční.
Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte prosím zákaznickou podporu s žádostí o další pomoc.
7. Specifikace
| Funkce | Specifikace |
|---|---|
| Značka | Andoer |
| Model | W200RGB |
| LED korálky | 69pcs White + 69pcs Yellow + 46pcs RGB |
| Teplota barev | 2500K-9000K |
| CRI (index podání barev) | 95+ |
| Maximální výstupní výkon | 7W |
| Světelný tok | 800Lux / 0.3m |
| Úhel paprsku | 120° |
| Typ baterie | Vestavěná lithiová baterie 3.7V 3000mAh |
| Nabíjecí port | USB Type-C |
| Velikost položky | 20 x 4 x 3.5 cm (7.9 x 1.6 x 1.4 palce) |
| Hmotnost položky | 11.3 unce (přibližně 320 g) |
| Tripod (folded length) | 7.5cm (use height 4.5cm) |
| Číslo modelu (ASIN) | QEX6686347803069PL (B09F8RLMSY) |
8. Bezpečnostní informace
Varování:
If you find the product damaged, deformed, or exhibiting abnormal performance, please stop using it immediately and contact us.
Always handle the device with care. Do not disassemble or modify the product. Keep out of reach of children.
9. Záruka a podpora
Andoer products are designed for reliability and performance. This product is covered by a standard manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.
For technical support, troubleshooting assistance, or warranty claims, please contact Andoer customer service through the retailer's platform or the official Andoer webweb. Před kontaktováním podpory si prosím připravte model produktu a informace o nákupu.
Navštivte Andoer Store on Amazon pro více informací a produktů.