Anderic A25-TX012 / A25-TX025 6 Speed DC Ceiling Fan Remote Control and Receiver Kit Instruction Manual

Zavedení

This instruction manual provides detailed information for the installation, operation, and maintenance of your Anderic RRTX012/FD40H02R Remote and Receiver Kit. This kit is designed as a direct replacement for specific Harbor Breeze ceiling fan remote models (A25-TX012, A25-TX025) and receiver models (FD30-H02R, FD40-H02R), offering enhanced control over your ceiling fan's speed and lighting functions. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

Figure 1: Anderic RRTX012 Remote and FD40-H02R Receiver Kit components.

Bezpečnostní informace

VAROVÁNÍ: To reduce the risk of fire, electric shock, or personal injury, always turn off power to the ceiling fan at the main circuit breaker or fuse box before beginning installation or performing any maintenance.

• Ensure all electrical connections comply with local codes and ordinances, and National Electrical Code (NEC). If you are unfamiliar with electrical wiring, consult a qualified electrician.
• Do not use this kit with solid-state speed controls.
• This kit is intended for use with DC ceiling fans only. Verify your fan's compatibility before installation.
• Udržujte baterie mimo dosah dětí. Při požití okamžitě vyhledejte lékařskou pomoc.
• Použité baterie zlikvidujte správným způsobem v souladu s místními předpisy.

Obsah balení

The Anderic RRTX012/FD40H02R Remote and Receiver Kit includes the following components:

• 1 x Anderic RRTX012 Remote Control
• 1 x Anderic FD40-H02R Receiver
• 1 x Remote Wall Mount Cradle (optional, may vary)
• 1 x 12V Battery (for remote control)

Nastavení a instalace

The installation of the receiver requires access to the wiring compartment of your ceiling fan. It is recommended that installation be performed by a qualified electrician if you are not comfortable with electrical wiring.

Instalace přijímače:

1. Vypnout napájení: Before starting, ensure the power to the ceiling fan is completely OFF at the circuit breaker.
2. Access Fan Wiring: Carefully lower the canopy of your ceiling fan to expose the wiring connections.
3. Disconnect Existing Receiver (if applicable): If replacing an old receiver, carefully disconnect all wires from the existing unit. Note the color coding for re-connection.
4. Connect New Receiver: The Anderic FD40-H02R receiver is designed for plug-and-play installation with compatible Harbor Breeze fans. Connect the wires from the receiver to the corresponding wires in your ceiling fan's wiring harness. Typically, this involves matching colors (e.g., Black to Black, White to White, Blue to Blue for light, etc.). Refer to your ceiling fan's original manual for specific wiring diagrams if needed.
5. Bezpečný příjemce: Carefully tuck the receiver and all wires into the fan's canopy, ensuring no wires are pinched. Re-secure the canopy.

Figure 2: Receiver showing wiring connections.

Obrázek 3: Zadní view of the receiver unit.

Remote Control Setup and Pairing:

1. Nainstalujte baterii: Open the battery compartment on the back of the Anderic RRTX012 remote control and insert the provided 12V battery, observing polarity.
2. Obnovit napájení: Turn the power back ON at the main circuit breaker.
3. Párovat dálkový ovladač: Within 5 seconds of restoring power to the fan, press and hold the "LEARN" button (often a small recessed button) on the remote control. Hold until the fan light blinks or the fan responds, indicating successful pairing. If there is no dedicated "LEARN" button, try pressing and holding the "Power" or "Light" button for 5 seconds.
4. Test funkčnosti: Test all functions of the remote control (fan speeds, light on/off, dimmer) to ensure proper operation.

Figure 4: Anderic RRTX012 Remote Control.

Návod k obsluze

The Anderic RRTX012 remote control provides intuitive control over your ceiling fan and its integrated light.

• Tlačítka rychlosti ventilátoru (1–6): Press the numbered buttons (1 through 6) to select the desired fan speed, with 1 being the lowest and 6 being the highest.
• Fan Power Button (Center): Press the central power button to turn the fan ON or OFF.
• Tlačítko ZAP/VYP světla: Press the light bulb icon button to turn the fan light ON or OFF.
• Light Dimmer Buttons (Up/Down Arrows): Use the up and down arrow buttons next to the light icon to adjust the brightness of the fan light.
• Tlačítka časovače (2H, 4H, 8H): Press these buttons to set the fan to operate for a specific duration (2 hours, 4 hours, or 8 hours) before automatically turning off.
• Reverse Fan Direction Button (Snowflake/Sun Icon): Press this button to reverse the direction of the fan blades, typically used for seasonal comfort (downward airflow for cooling in summer, upward airflow for circulating warm air in winter).

Údržba

Výměna baterie:

When the remote control's range decreases or it becomes unresponsive, it is likely time to replace the battery.

1. Najděte přihrádku na baterie na zadní straně dálkového ovladače.
2. Posunutím otevřete kryt baterie.
3. Vyjměte starou 12V baterii.
4. Vložte novou 12V baterii a dbejte na správnou polaritu (+ a -).
5. Pevně ​​zavřete kryt baterie.
6. Starou baterii zlikvidujte zodpovědně.

Čištění:

Wipe the remote control and receiver with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.

Odstraňování problémů

Specifikace

Záruka a podpora

For warranty information or technical support regarding your Anderic RRTX012/FD40H02R Remote and Receiver Kit, please contact the manufacturer, Dan's Electronics Etc., Inc., or visit the official Anderic webmísto.

Anderic Official Store: Visit Anderic Store on Amazon

Anderic is a US-based company committed to providing high-quality replacement remote controls and accessories.