Pure Sine Wave 1500W Power Inverter User Manual

1. Důležité bezpečnostní informace

Před instalací nebo provozem měniče si prosím přečtěte a pochopte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo vážnému zranění.

• Connect inverter to a 12V 200 Ah or above battery with the provided cables.
• DO NOT exceed 1500 Watt total load.
• Do not leave the power inverter in the ON position while your vehicle is off to prevent battery drain.
• Disconnect the positive battery terminal before doing any wiring to the inverter.
• Do not put the inverter into direct sunlight; keep it in a cool and dry environment.
• Nepoužívejte měnič s výrobkem, který spotřebovává vyšší watttage, než může invertor poskytnout, protože to může způsobit poškození střídače a produktu.
• Zajistěte řádné větrání kolem měniče, aby nedošlo k přehřátí.
• This device is FCC Approved and designed with low EMI technology to reduce noise and interference.

2. Konec produktuview

The LEESKY 1500W Pure Sine Wave Power Inverter converts DC 12V power from your battery to AC 110V/120V, suitable for various appliances in RVs, cars, vessels, and emergency situations. It features dual GFCI sockets for current leakage protection, a large LCD display for monitoring, and a remote controller for convenience.

Obrázek 2.1: The LEESKY 1500W Pure Sine Wave Power Inverter shown with its included accessories, including battery cables, remote controller, and earth wire.

Obrázek 2.2: Examples of the inverter's versatile applications, including powering devices in RVs, boats, and for outdoor activities.

Obrázek 2.3: The large LCD display provides real-time information on input voltage, výstupní vodatage, battery status, and protection codes.

Obrázek 2.4: The included remote controller with a 15ft cable allows for convenient power management from a distance.

Obrázek 2.5: View of the inverter's intelligent cooling fans, positive and negative terminals, GFCI sockets, USB ports, and power switch.

Obrázek 2.6: The inverter is constructed from durable aluminum alloy materials, with dimensions of 17.5 x 8 x 3.3 inches.

Klíčové vlastnosti:

• Výstup čisté sinusové vlny: Provides stable and clean power, reducing noise and interference, compatible with all devices, especially motors, pumps, and compressors.
• Dual GFCI Sockets: Offers up to 1500W output per outlet and protects against current leakage.
• Vysoká účinnost: Up to 90% conversion efficiency with Total Harmonic Distortion (THD) lower than 3%.
• LCD displej: Easily monitor input voltage, výstupní vodatage, battery status, and protection codes.
• Dálkový ovladač: Includes a 15ft cable for convenient remote operation.
• Low EMI Design & FCC Approved: Reduces electronic device noise and interference, suitable for radio-related appliances.

3. Specifikace

4. Obsah balení

Následující položky jsou součástí vašeho balíčku:

• 1x 1500 watt Pure Sine Wave Power Inverter
• 2x Battery Cables (black and red)
• 1x Remote Controller with 15ft cable
• 1x Earth Wire
• 8x Shockproof Pads
• 1x Uživatelská příručka (tento dokument)

5. Nastavení

1. Připravte si baterii: Ensure your 12V battery is fully charged and capable of providing sufficient current for your intended load. A battery of 200 Ah or above is recommended.
2. Připojení kabelů baterie: Connect the provided red battery cable to the positive (+) terminal of the inverter and the positive (+) terminal of your 12V battery. Connect the black battery cable to the negative (-) terminal of the inverter and the negative (-) terminal of your 12V battery. Ensure connections are secure and tight.
3. Connect Earth Wire: Attach the earth wire to the grounding terminal on the inverter and to a proper ground point (e.g., vehicle chassis, ground rod).
4. Mount the Inverter (Optional): Use the provided shockproof pads and mounting hardware to secure the inverter in a well-ventilated, cool, and dry location, away from direct sunlight or heat sources.
5. Připojení dálkového ovladače (volitelné): Plug the remote controller's RJ10 cable into the designated port on the inverter.

6. Návod k obsluze

1. Zapnutí: Press and hold the power switch on the inverter for approximately 0.5 seconds until the LCD screen illuminates and the power indicator turns green. If using the remote controller, press and hold its power button similarly.
2. Displej monitoru: The LCD display will show the input voltage (battery status), output voltage, output frequency (60Hz), and current wattagje přitahován připojenými zařízeními.
3. Připojení klimatizačních zařízení: Plug your AC devices into the dual GFCI outlets on the inverter. Ensure the total wattage of all connected devices does not exceed 1500W. For devices with motors or compressors, utilize the 'Soft Start' function by turning on the appliance first, then powering up the inverter.
4. Připojení USB zařízení: Use the dual 4.8A USB ports to charge compatible USB devices.
5. Vypnout: To turn off the inverter, press and hold the power switch on the inverter or the remote controller until the LCD screen turns off and the power indicator extinguishes. It is recommended to turn off the inverter when not in use to prevent unnecessary battery drain.

For a practical demonstration of the inverter's operation with various tools, please refer to Video 2.1 in the Product Overview sekce.

7. Údržba

Regular maintenance ensures optimal performance and longevity of your LEESKY Power Inverter:

• Čištění: Keep the inverter clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use liquid cleaners.
• Větrání: Ensure the cooling fans and ventilation openings are not blocked. The intelligent cooling fan will run automatically when the temperature reaches 104℉ (40℃) or the load power is more than 40% of the rated power.
• Spojení: Periodically check all cable connections (battery and ground) to ensure they are secure and free from corrosion.
• Skladování: Pokud budete měnič skladovat delší dobu, odpojte jej od baterie a uložte jej na chladném a suchém místě.

8. Řešení problémů

The LCD display provides error codes to help diagnose issues:

• LO (Low Voltage ochrana): Označuje vstupní objemtage is too low (below 9.5VDC). Recharge or replace the 12V battery.
• OL (Output Overload or Short-circuit Protection): The connected load exceeds the inverter's capacity or there is a short circuit. Reduce the load or check for short circuits.
• HI (Over-voltage ochrana): Vstupní voltage is too high (above 16VDC). Check the battery voltage.
• Ochrana proti přehřátí: The inverter is overheating (above 149℉/65℃). Reduce the load, ensure proper ventilation, and allow the unit to cool down.

Pokud problémy přetrvávají i po provedení těchto kroků, kontaktujte prosím zákaznickou podporu.

9. Záruka a podpora

The LEESKY 1500W Pure Sine Wave Power Inverter comes with 18 months of maintenance. Product liability insurance is covered by AIG insurance company.

Pro další pomoc se prosím obraťte na oficiální Uživatelská příručka (PDF) or contact LEESKY customer support.