Ikea 703.384.18

Ikea BAGGANAS 703.384.18 Stainless Steel Handle Instruction Manual

Model: 703.384.18

1. Konec produktuview

The Ikea BAGGANAS 703.384.18 is a set of two stainless steel handles designed for cabinets and drawers. These handles offer a modern and clean aesthetic, suitable for various interior styles. Each handle measures 143mm in length and features a durable stainless steel finish.

  • Set includes 2 BAGGANAS handles.
  • Dimensions: Length 143 mm, Width 9 mm, Depth 31 mm.
  • Required drilled hole diameter: 5 mm.
  • Hole spacing (center-to-center): 128 mm.
  • Finish: Stainless steel.

2. Bezpečnostní informace

Please read all instructions carefully before installation. Keep small parts and packaging materials away from children. Always use appropriate safety gear, such as eye protection, when drilling. Ensure the mounting surface is suitable for drilling and can support the handle securely.

3. Obsah balení

  • 2 x Ikea BAGGANAS Handles (Model: 703.384.18)
  • Mounting screws (typically included with Ikea handles)

4. Nastavení a instalace

Požadované nástroje:

  • Tužka
  • Měřicí páska nebo pravítko
  • Vrtejte vrtákem 5 mm
  • Screwdriver (appropriate for the provided screws)

Kroky instalace:

  1. Změřte a označte: Determine the desired position for your handle on the cabinet door or drawer front. Using a measuring tape and pencil, mark two points 128 mm apart (center-to-center) where the screws will go. Ensure the marks are level and centered as desired.
  2. Vrtací pilotní otvory: Carefully drill pilot holes at the marked points using a 5 mm drill bit. Drill straight through the material to avoid splintering.
  3. Připojit rukojeť: Align the handle with the drilled holes. Insert the mounting screws from the inside of the cabinet door or drawer and thread them into the handle.
  4. Utáhněte šrouby: Using a screwdriver, tighten the screws until the handle is firmly secured. Do not overtighten, as this can damage the cabinet material or the handle.
Ikea BAGGANAS 703.384.18 stainless steel handle, showing its rectangular shape and finish.

This image displays the Ikea BAGGANAS handle, highlighting its sleek stainless steel finish and rectangular design. The handle measures 143mm in length and is ready for installation.

5. Provoz

Once installed, the BAGGANAS handle functions as a pull for opening and closing cabinet doors or drawers. Grip the handle firmly and apply gentle force to operate the furniture component.

6. Údržba a péče

To maintain the appearance and longevity of your stainless steel handles, follow these care instructions:

  • Čištění: Rukojeti pravidelně otírejte měkkým hadříkem dampvodou nebo jemným, neabrazivním čisticím roztokem.
  • Vyhněte se agresivním chemikáliím: Do not use abrasive cleaners, steel wool, or chemical solvents, as these can scratch or damage the stainless steel finish.
  • Sušení: Dry the handles immediately after cleaning to prevent water spots.

7. Řešení problémů

  • Uvolněná rukojeť: If the handle becomes loose, gently tighten the mounting screws from the inside of the cabinet or drawer using an appropriate screwdriver. Do not overtighten.
  • Škrábance: Minor surface scratches on stainless steel may sometimes be reduced using a specialized stainless steel polish and a soft cloth, following the product's instructions. Deep scratches may require professional attention or replacement.

8. Specifikace

AtributHodnota
Číslo modelu703.384.18
ZnačkaIkea
MateriálNerez
BarvaStříbro
Celková délka143 mm
Šířka9 mm
Depth (Projection)31 mm
Hole Spacing (Center-to-Center)128 mm
Required Drilled Hole Diameter5 mm
Počet položek2
Zamýšlené použitíKrytý

9. Záruka a podpora

For information regarding warranty coverage or product support, please refer to your purchase receipt or contact the retailer where the product was purchased. You may also visit the official Ikea website for general customer service and support information.

© 2023 Ikea. Všechna práva vyhrazena. Tato příručka slouží pouze pro informační účely.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.