1. Úvod
Thank you for choosing the ADVITI FRENIT Modern Outdoor Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new outdoor lighting fixture. The ADVITI FRENIT is a modern, energy-efficient outdoor luminaire designed to provide reliable illumination with integrated motion sensing and dimming capabilities. Its robust IP65 rating ensures durability in various outdoor conditions.
Obrázek 1: Přední strana view of the ADVITI FRENIT Modern Outdoor Light.
2. Bezpečnostní informace
Před instalací a použitím si pečlivě přečtěte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo jiným nebezpečím.
- Elektrická bezpečnost: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the power supply is disconnected at the circuit breaker before any installation, maintenance, or repair work.
- Venkovní použití: This product is designed for outdoor use and has an IP65 rating, indicating protection against dust and low-pressure water jets. However, ensure all connections are properly sealed and protected from direct water ingress during installation.
- Zacházení: Do not drop or subject the fixture to severe impact. Inspect the fixture for any damage before installation.
- Světelný zdroj: The light source is an integrated SMD LED. Do not attempt to replace the LEDs yourself. Contact qualified personnel for service.
- Provozní teplota: Ensure the operating environment is within suitable temperature ranges for electronic devices.
3. Nastavení a instalace
The ADVITI FRENIT light is designed for wall mounting. Follow these steps for proper installation:
- Příprava: Disconnect power at the main circuit breaker. Choose a suitable mounting location on a solid surface, ensuring it is within reach of the power supply (230V~, 50Hz).
- Montáž držáku: The fixture's backplate serves as the mounting bracket. Mark the drilling points on the wall using the backplate as a template. Drill holes and insert appropriate wall plugs (not supplied).
- Zapojení: Connect the electrical wires from your power supply to the terminals on the fixture's backplate. Ensure correct polarity (Live, Neutral, Earth) and secure all connections. Use appropriate waterproof connectors for outdoor wiring.
- Zajištění přípravku: Align the fixture with the mounted backplate and secure it using the provided screws. Ensure a tight seal to maintain the IP65 rating.
- Zapnutí: Jakmile je instalace dokončena a všechna připojení jsou bezpečná, obnovte napájení jističem.
Obrázek 2: Zadní view of the light fixture, indicating mounting points.
Obrázek 3: Boční profíkfile of the light, illustrating its mounted position.
4. Návod k obsluze
The ADVITI FRENIT light features an integrated motion sensor and dimming function. Adjustments are made via controls located on the top of the unit.
Obrázek 4: Nahoře view showing the adjustment dials for sensor settings.
- Pohybový senzor (PIR): The light is equipped with a Passive Infrared (PIR) sensor that detects movement within its detection field (up to 9 meters, 140° viewing angle). The light will activate when motion is detected.
- Nastavení LUX: This dial (labeled "LUX") controls the ambient light level at which the motion sensor becomes active.
- Otočte se směrem ☼ (sun icon) for the sensor to activate in brighter conditions (daylight).
- Otočte se směrem ☽ (moon icon) for the sensor to activate only in darker conditions (night).
- Adjustment range: <3 - 2000 lux.
- Nastavení ČASU: This dial (labeled "TIME") adjusts how long the light remains on after motion is detected and no further motion is sensed.
- Minimum setting: 10 seconds ± 3 seconds.
- Maximum setting: 5 minutes ± 1 minute.
- SENS Setting: The product specifications indicate "SENS detection adjustment range: no". This implies the sensitivity of the motion sensor is fixed and not adjustable via a dial.
- Funkce stmívání: The product description mentions a "dimming function". This typically refers to the light's ability to operate at a lower intensity when no motion is detected, or to gradually dim after the set TIME period. Specific controls for this function are not detailed in the provided information, suggesting it might be an automatic feature or integrated with the sensor logic.
Figure 5: Detail of the integrated motion sensor.
5. Údržba
Regular maintenance ensures optimal performance and longevity of your ADVITI FRENIT light.
- Čištění: Před čištěním odpojte napájení. Použijte měkký,amp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or polycarbonate diffuser.
- Inspekce: Periodically inspect the fixture for any signs of damage, loose connections, or wear. Ensure the mounting remains secure.
- LED diody: The integrated SMD LEDs are designed for a long lifespan (50,000 hours). They are not user-replaceable.
6. Řešení problémů
If you encounter issues with your ADVITI FRENIT light, refer to the following common troubleshooting steps:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | No power supply; incorrect wiring; LUX setting too high (daylight); sensor malfunction. | Check circuit breaker and wiring connections. Adjust LUX setting towards the moon icon. Test sensor by moving in front of it. |
| Světlo svítí nepřetržitě. | Constant motion detected; TIME setting too long; sensor malfunction. | Ensure no continuous motion in detection area. Adjust TIME setting to a shorter duration. |
| Světlo se rozsvítí během dne. | Nastavení LUX je příliš nízké (směrem k ikoně měsíce). | Adjust LUX setting towards the sun icon to require more darkness for activation. |
| Detection range is poor. | Obstructions; sensor dirty; incorrect mounting height. | Clear obstructions. Clean sensor lens. Ensure mounting height is appropriate for optimal detection. |
If the problem persists after trying these steps, contact a qualified electrician or the product supplier for assistance.
7. Specifikace
Detailed technical specifications for the ADVITI FRENIT Modern Outdoor Light:
- Model: AD-OP-6204GLPMR4
- Moc: 20 W
- Supply Voltage: 230 V ~, 50 Hz
- Světelný zdroj: Integrated SMD LED light sources
- Světelný tok: 1800 lm
- Teplota barev: 4000K (neutrální bílá)
- Color Rendering Index (Ra/CRI): ≥85
- Stupeň ochrany (IP): IP65 (Dust tight and protected against low-pressure water jets from any direction)
- Impact Protection (IK): IK10
- Typ senzoru: PIR (pasivní infračervený)
- Rozsah detekce: Max. 9 m
- Viewúhel: 140°
- LUX Sensor Adjustment Range: <3 - 2000 lux
- Timer Adjustment Range: Min: 10 sec. ± 3 sec., Max: 5 min. ± 1 min.
- Rozměry (Š x V x H): 250 mm × 188 mm × 66 mm (25 × 18.8 × 6.6 cm)
- Hmotnost: 531 g
- Materiál obrazovky: PC (polykarbonát)
- Materiál pouzdra: Hliník
- Životnost: 50,000 hodin
Obrázek 6: Přední strana view of the ADVITI FRENIT light.
Figure 7: Energy efficiency label (Class F). For more details, visit Databáze EPREL.
Figure 8: Product packaging highlighting key features like 50,000h lifespan, IK10 impact protection, max 9m motion sensor range, and 140° detection angle.
8. Záruka a podpora
For warranty information, please refer to the terms and conditions provided by your retailer or contact Adviti directly. Keep your proof of purchase for any warranty claims.
For technical support or further assistance, please contact the customer service department of your point of purchase or visit the official Adviti webmísto.