Adviti RIOLIT LED Outdoor Luminaire with Motion Detector (Model AD-OP-6206GLPMR4) User Manual

1. Úvod

The Adviti RIOLIT LED Outdoor Luminaire is designed for exterior lighting, featuring an integrated motion detector for enhanced energy efficiency. Its robust aluminum casing and modern design make it suitable for various outdoor applications such as building facades, fences, terraces, and entryways. The luminaire provides 1100 lumens of neutral white light (4000K) and is equipped with modern SMD LEDs for high energy efficiency and a long lifespan. The milky polycarbonate diffuser ensures uniform light distribution. With an IP65 rating, it is protected against dust and water, making it ideal for challenging outdoor conditions.

2. Bezpečnostní informace

Před instalací a použitím si pečlivě přečtěte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo jiným nebezpečím.

• Always disconnect power at the main circuit breaker before installing, servicing, or cleaning the luminaire.
• Instalaci by měl provést kvalifikovaný elektrikář v souladu se všemi místními a národními elektrotechnickými předpisy.
• Ensure the luminaire is properly grounded to prevent electric shock.
• Do not modify the luminaire or use it for purposes other than its intended use.
• Udržujte svítidlo mimo dosah hořlavých materiálů.
• Nedívejte se přímo do LED světelného zdroje, když je rozsvícený.
• Ujistěte se, že všechny spoje jsou bezpečné a řádně izolované.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny a nepoškozené.

• 1x Adviti RIOLIT LED Outdoor Luminaire (Model AD-OP-6206GLPMR4)
• Montážní materiál (šrouby, hmoždinky)
• Uživatelská příručka

4. Technické specifikace

5. Nastavení a instalace

Follow these steps for safe and proper installation of your Adviti RIOLIT luminaire.

1. Vyberte místo instalace: Select a suitable outdoor location, ideally between 1.8 and 2.5 meters high, where the motion sensor will have an unobstructed view of the desired detection area. Avoid locations near heat sources or reflective surfaces that could interfere with the sensor.
2. Odpojit napájení: Před zahájením jakýchkoli elektrických prací se ujistěte, že je hlavní přívod proudu do prostoru instalace vypnut jističem.
3. Připravte montážní povrch: Mark the drilling points on the wall using the luminaire's mounting base as a template. Drill holes and insert the provided wall plugs.
4. Kabelové připojení: Open the wiring compartment on the back of the luminaire. Connect the live (L), neutral (N), and ground (PE) wires from your electrical supply to the corresponding terminals inside the luminaire. Ensure all connections are tight and secure.
5. Mount the Luminaire: Secure the luminaire's mounting base to the wall using the provided screws. Ensure the luminaire is firmly attached.
6. Close Wiring Compartment: Carefully close the wiring compartment, ensuring no wires are pinched.
7. Obnovit napájení: Jakmile je instalace dokončena a všechna připojení jsou bezpečná, obnovte napájení hlavním jističem.

Figure 5.1: Adviti RIOLIT luminaire installed on an exterior wall, demonstrating typical placement.

Obrázek 5.2: Zadní view of the luminaire, illustrating the mounting plate and electrical connection points.

6. Operating Instructions and Sensor Adjustment

The Adviti RIOLIT luminaire features an integrated PIR motion sensor with adjustable settings for optimal performance.

Obrázek 6.1: Strana view of the luminaire, showing the location of the motion sensor and adjustment controls.

6.1. Sensor Adjustment Dials

The motion sensor has two adjustable dials, typically located near the sensor itself. These dials control the LUX (light sensitivity) and TIME (lighting duration) settings.

• LUX (Light Sensitivity) Adjustment: This dial determines the ambient light level at which the sensor will activate the luminaire.
  • Turn the dial towards the 'sun' symbol for activation during both day and night (high ambient light sensitivity).
  • Turn the dial towards the 'moon' symbol for activation only in low light conditions or darkness (low ambient light sensitivity).
  • The adjustable range is <3—2000lux.
• TIME (Lighting Duration) Adjustment: This dial sets how long the light remains on after motion is detected and no further motion is sensed.
  • Turn the dial to set the desired duration.
  • The adjustable range is from a minimum of 10 seconds (± 3 seconds) to a maximum of 5 minutes (± 1 minute).
• SENS (Detection Range Sensitivity): This model does not feature an adjustable SENS dial. The detection range is fixed at 9 meters with a 140° viewúhel.

Testování senzoru: After adjusting the dials, test the luminaire's operation by walking through the detection area. Make further adjustments as needed to achieve desired performance.

7. Údržba

Regular maintenance ensures the longevity and optimal performance of your Adviti RIOLIT luminaire.

• Čištění: Clean the luminaire periodically with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or the polycarbonate diffuser.
• Inspekce: Periodically inspect the luminaire for any signs of damage to the casing, diffuser, or wiring. If any damage is found, disconnect power immediately and have it inspected by a qualified electrician.
• Zdroj světla LED: The integrated LED light source is designed for a long lifespan and is not user-replaceable. Do not attempt to open the sealed LED compartment.

8. Řešení problémů

If you encounter issues with your luminaire, refer to the following common problems and solutions:

• Světlo se nerozsvítí:
  • Zkontrolujte, zda je připojeno a aktivní napájení.
  • Verify the LUX setting. If set to 'moon' (low sensitivity) and there is still ambient light, the sensor may not activate. Adjust towards 'sun' for testing.
  • Ujistěte se, že senzor pohybu není zakrytý.
  • Confirm that motion is occurring within the detection range.
• Světlo svítí nepřetržitě:
  • Check the TIME setting. If set to maximum, the light will stay on longer.
  • Ensure there is no continuous motion within the sensor's detection area (e.g., swaying branches, passing vehicles).
  • Verify that the LUX setting is not set to activate during daylight hours if continuous illumination is not desired.
• Sensor does not detect motion reliably:
  • Ensure the installation height is within the recommended 1.8-2.5 meters.
  • Check for obstructions in the sensor's field of view.
  • Extreme temperature changes can sometimes affect PIR sensor performance.
• Blikání světla:
  • Check for loose wiring connections. Disconnect power before checking.
  • Ujistěte se, že je napájecí zdroj stabilní.

Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu.

9. Záruka a podpora

This Adviti RIOLIT LED Outdoor Luminaire comes with a standard manufacturer's warranty. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for any warranty claims.

For warranty claims, technical assistance, or further inquiries, please contact your original retailer or visit the official Adviti webstránky s kontaktními informacemi zákaznického servisu.