AMIO 01522

Návod k obsluze LED světel pro denní svícení AMIO 01522

Model: 01522

1. Úvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your AMIO 01522 LED Daytime Running Lights. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

2. Bezpečnostní informace

Vždy dodržujte následující bezpečnostní opatření:

  • Ensure the vehicle's ignition is off and the battery is disconnected before beginning installation to prevent electrical shock or short circuits.
  • Pokud si nejste jisti některými kroky, měl by instalaci provést kvalifikovaný odborník.
  • Produkt žádným způsobem neupravujte. Neoprávněné úpravy mohou vést ke ztrátě záruky a představovat bezpečnostní riziko.
  • Ujistěte se, že všechna připojení jsou bezpečná a řádně izolovaná, aby se zabránilo vniknutí vlhkosti a elektrickým problémům.
  • Verify local regulations regarding the use of daytime running lights before installation.

3. Obsah balení

The AMIO 01522 LED Daytime Running Lights package includes:

  • 1x AMIO 01522 Set of LED Daytime Running Lights (Pair)
  • Montážní držáky a hardware
  • Kabelový svazek
  • Návod k použití (tento dokument)
AMIO 01522 LED Daytime Running Lights in packaging

Figure 3.1: Contents of the AMIO 01522 package, showing the two LED daytime running lights and their retail box.

4. Specifikace

Tabulka 4.1: Specifikace produktu
FunkceDetail
Typ světlaLED
Počet LED diod10 za jednotku
TvarŠiroký
Délka160 mm
Výška25 mm
Šířka29 mm (base), 52 mm (overall)
Materiál bydleníHliník
Spotřeba energie11.52 W
Světelný tok1000 lm
Teplota barev5600 K
Materiál čočkyPlast
Mounting SidePřední
Barva bydleníČerný
Barva LEDBílý
Illumination Lifespan20,000 hodin
CertifikaceE4, RCE87
Univerzální střihAno
Ochrana proti vlhkostiChráněno proti tryskající vodě
Technical drawing of AMIO 01522 LED Daytime Running Light with dimensions

Figure 4.1: Dimensional drawing of the AMIO 01522 LED Daytime Running Light, showing length (160mm), height (25mm), and width (29mm at base, 52mm overall).

5. Nastavení a instalace

Follow these steps for proper installation of your AMIO 01522 LED Daytime Running Lights:

  1. Příprava:
    • Ensure the vehicle is turned off and the battery is disconnected.
    • Identify a suitable mounting location on the front of your vehicle, ensuring the lights are visible and comply with local regulations. The lights are designed for front mounting.
    • Důkladně očistěte montážní povrch.
  2. Montáž světel:
    Přední view of AMIO 01522 LED Daytime Running Light

    Obrázek 5.1: Přední strana view of a single AMIO 01522 LED Daytime Running Light, showing the clear lens and LED array.

    • Attach the provided mounting brackets to the back of each DRL unit using the supplied hardware.
    • Securely mount the DRL units to your chosen location on the vehicle. Ensure they are firmly fixed and correctly oriented.
  3. Připojení kabeláže:
    Zadní view of AMIO 01522 LED Daytime Running Light with wiring harness

    Obrázek 5.2: Zadní view of the AMIO 01522 LED Daytime Running Light, showing the integrated mounting bracket and the wiring harness with a connector.

    • Connect the wiring harness from the DRL units to the vehicle's electrical system. Typically, DRLs are connected to a power source that activates when the ignition is on.
    • The red wire usually connects to the positive (+) terminal (e.g., ignition switched 12V).
    • The black wire usually connects to the negative (-) terminal or vehicle ground.
    • Some DRL kits include a control module for automatic on/off functionality. Refer to the specific wiring diagram provided with your kit if applicable.
    • Ensure all connections are waterproof and secure.
  4. Testování:
    • Znovu připojte akumulátor vozidla.
    • Turn on the vehicle's ignition to test if the DRLs illuminate correctly.
    • Verify that both lights are working and properly aligned.

6. Návod k obsluze

The AMIO 01522 LED Daytime Running Lights are designed for automatic operation:

  • Once properly installed and wired, the DRLs will typically turn on automatically when the vehicle's ignition is switched on.
  • They are intended to increase vehicle visibility during daylight hours.
  • Depending on the wiring configuration, they may dim or turn off when the vehicle's main headlights are activated.
Close-up of AMIO 01522 LED Daytime Running Light showing E4 and RCE87 markings

Obrázek 6.1: Detail view of the AMIO 01522 LED Daytime Running Light lens, highlighting the E4 and RCE87 certification markings, indicating compliance with European standards.

7. Údržba

The AMIO 01522 LED Daytime Running Lights require minimal maintenance:

  • Čištění: Periodically clean the lens with a soft, damp cloth to remove dirt and debris. Avoid abrasive cleaners or solvents that could damage the plastic lens.
  • Inspekce: Regularly check the lights for any signs of damage, loose connections, or corrosion. Ensure the mounting remains secure.
  • Životnost LED: The LEDs have a long lifespan of approximately 20,000 hours and are not user-replaceable. If a unit fails, the entire unit should be replaced.

8. Řešení problémů

If you encounter issues with your AMIO 01522 LED Daytime Running Lights, refer to the following table:

Tabulka 8.1: Průvodce řešením problémů
ProblémMožná příčinaŘešení
Světla se nerozsvítí.No power supply, loose connection, blown fuse, incorrect wiring.Check all wiring connections for security. Verify power supply to the DRLs. Check vehicle's fuse box for any blown fuses. Ensure correct polarity (+/-).
Jedno světlo nefunguje.Faulty unit, loose connection to that specific light.Inspect the wiring connection to the non-working light. If connections are secure, the unit may be faulty and require replacement.
Světla blikají nebo stmívají.Unstable power supply, loose connection, voltage výkyvy.Ensure stable 12V/24V power supply. Check for loose connections. Consult an automotive electrician if the issue persists.
Vlhkost uvnitř čočky.Seal compromise, extreme temperature changes.Small amounts of condensation can occur and usually dissipate. If significant moisture or water ingress is present, the seal may be compromised. Check for cracks or damage.

9. Záruka a podpora

AMIO products are manufactured to high-quality standards. For warranty information, please refer to the terms and conditions provided at the point of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.

For technical support or further assistance, please contact AMIO customer service or your authorized dealer. Contact details can typically be found on the product packaging or the manufacturer's official webmísto.

© 2023 AMIO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.