LIGE Men's Multifunction Quartz Chronograph Watch

Zavedení

This manual provides instructions for the proper use and maintenance of your LIGE LG8932 Men's Multifunction Quartz Chronograph Watch. Please read this manual thoroughly to ensure optimal performance and longevity of your timepiece.

Bezpečnostní informace

To prevent damage and ensure safe operation, please observe the following:

• Nevystavujte hodinky extrémním teplotám (horku nebo chladu) ani náhlým změnám teplot.
• Do not operate the crown or pushers while the watch is wet, especially when submerged in water, to prevent water ingress.
• Chraňte hodinky před silnými magnetickými poli, protože to může ovlivnit přesnost quartzového strojku.
• Zabraňte pádu hodinek na zem nebo jejich vystavení silným nárazům.
• Nepokoušejte se sami otevírat pouzdro hodinek ani vyměňovat baterii, mohlo by dojít ke ztrátě záruky a poškození hodinek.

Konec produktuview

The LIGE LG8932 watch features a robust stainless steel case, a comfortable leather strap, and a high-hardness mineral glass dial window. It is equipped with a Japanese quartz movement for precise timekeeping and includes chronograph functions and luminous hands for visibility in low light.

Image: Close-up of the LIGE LG8932 watch face, highlighting the detailed design and subdials.

Komponenty:

• Hlavní koruna: Používá se k nastavení času a data.
• Tlačítka (A a B): Ovládejte funkce chronografu.
• Hodinová, minutová, vteřinová ručička: Main time display.
• Chronografické dílčí ciferníky: Measure elapsed time (seconds, minutes, hours).
• 24hodinový subciferník: Displays time in a 24-hour format, often with moon and stars indicator.
• Datumové okno: Zobrazuje aktuální datum.
• Svítící ručičky: Glow in the dark for improved readability.

Nastavení

Nastavení času:

1. Pull the main crown out to position 2. The second hand will stop.
2. Turn the crown to set the hour and minute hands to the desired time. Ensure the 24-hour subdial aligns correctly for AM/PM.
3. Push the crown back to position 1 to start the watch.

Nastavení data:

1. Pull the main crown out to position 1.
2. Otáčením korunky ve směru hodinových ručiček nastavte datum. Nenastavujte datum mezi 21:00 a 3:00, mohlo by to narušit mechanismus automatické změny data.
3. Zatlačte korunku zpět do její normální polohy.

Image: Function description diagram showing how to adjust the calendar, time, and use the chronograph start/pause/reset buttons.

Obsluha chronografu

Funkce chronografu umožňuje měřit uplynulý čas.

1. Start: Press pusher A (top button) to start the chronograph. The chronograph second hand will begin to move.
2. Zastavit/Pozastavit: Press pusher A again to stop or pause the chronograph. The elapsed time will be displayed on the subdials.
3. Resetovat: With the chronograph stopped, press pusher B (bottom button) to reset all chronograph hands to their zero positions.

Údržba

Voděodolnost:

This watch is 3 ATM (30 meters) water resistant. This means it is suitable for daily use and can withstand splashes, rain, and hand washing. It is NOT suitable for bathing, swimming, diving, or any water activities where it might be submerged for extended periods or subjected to high water pressure.

Image: Water resistance guide for 30M watches, indicating suitability for hand washing and rain, but not swimming or showering.

Čištění:

Wipe the watch case and strap regularly with a soft, dry cloth to remove dirt and moisture. For leather straps, avoid excessive moisture and direct sunlight to prevent damage and discoloration.

Výměna baterie:

The watch uses a Japanese quartz movement with a battery life of up to two years. When the battery runs low, the watch may stop or the second hand may move erratically. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

Odstraňování problémů

• Hodinky neběží: Zkontrolujte, zda je korunka zcela zatlačena. Pokud ano, může být nutné vyměnit baterii.
• Nesprávný čas/datum: Refer to the "Setting the Time" and "Setting the Date" sections.
• Ručičky chronografu se neresetují na nulu: This may require a chronograph reset procedure, which typically involves pulling the crown out and pressing the pushers in a specific sequence. Consult a watch specialist if the issue persists.
• Fogging under crystal: This indicates moisture ingress. Stop using the watch immediately and have it inspected by a professional to prevent further damage.

Specifikace

Image: Product parameters diagram detailing dial diameter, band width, strap length, dial thickness, weight, water resistance, band material, and case material.

Záruka a podpora

For warranty information or technical support, please refer to the documentation included with your purchase or contact LIGE customer service. Keep your purchase receipt as proof of purchase.