YIHUA 939D+ Digital Soldering Station and 305D-IV DC Lab Power Supply User Manual

1. Úvod

This manual provides detailed instructions for the safe and effective operation, setup, and maintenance of your YIHUA 939D+ Digital Soldering Station and YIHUA 305D-IV Regulated DC Lab Power Supply bundle. Please read this manual thoroughly before using the equipment.

Bezpečnostní informace

• Always operate the units in a well-ventilated area.
• Wear appropriate personal protective equipment, including safety glasses.
• Do not touch the soldering iron tip or heating element when hot.
• Ensure the power supply is disconnected before making or changing connections.
• This equipment operates on 110-127V AC. Ensure your power source matches this requirement.
• Uchovávejte mimo dosah dětí.

2. Obsah balení

Ověřte, zda jsou v balení přítomny všechny níže uvedené položky:

• YIHUA 939D+ Digital Soldering Station
• YIHUA 305D-IV Regulated DC Lab Power Supply
• Soldering Iron with Heat-Resistant Handle and Cord
• Soldering Iron Holder (integrated or separate)
• 3 x Assorted Solder Tips
• 1 x Čisticí houba
• 1 x 50g 0.8mm Solder Wire
• 1 x Pájecí knot
• 1 x Cleaning Kit (Brass Ball)
• Power Cords for both units

Image 2.1: YIHUA 939D+ Digital Soldering Station with included accessories.

Image 2.2: YIHUA 305D-IV Regulated DC Lab Power Supply.

3. Konec produktuview

3.1 YIHUA 939D+ Digital Soldering Station

The YIHUA 939D+ is a digital soldering station designed for precision soldering tasks. It features a digital display for real-time temperature readout and a temperature stabilization function to maintain a steady iron temperature during operation. The station is ESD-safe to protect sensitive electronic components.

Image 3.1: Labeled components of the YIHUA 939D+ Soldering Station.

3.2 YIHUA 305D-IV Regulated DC Lab Power Supply

The YIHUA 305D-IV is a regulated DC lab power supply offering variable output from 0-30V and 0-5A. It includes automatic Constant Voltage (CV) and Constant Current (CC) modes, along with short-circuit and overcurrent protection to safeguard connected devices and the unit itself.

Image 3.2: YIHUA 305D-IV Power Supply display and reading accuracy.

4. Pokyny k nastavení

4.1 YIHUA 939D+ Soldering Station Setup

1. Umístěte pájecí stanici na stabilní, tepelně odolný povrch.
2. Connect the soldering iron handle to the 'IRON' receptacle on the front panel of the 939D+ station. Ensure a secure connection.
3. Place the soldering iron into its holder.
4. Insert the cleaning sponge into the sponge tray and dampen it slightly with water. Alternatively, place the brass ball cleaner in its designated area.
5. Connect the power cord to the back of the soldering station and then to a 110-127V AC power outlet.

4.2 YIHUA 305D-IV DC Lab Power Supply Setup

1. Position the power supply on a stable surface, ensuring adequate ventilation around the unit.
2. Connect the power cord to the back of the power supply and then to a 110-127V AC power outlet.
3. For output, connect your test leads or device to the output terminals (red for positive, black for negative, yellow for ground) on the front panel.

5. Návod k obsluze

5.1 YIHUA 939D+ Digital Soldering Station Operation

1. Zapnutí: Flip the ON/OFF power switch. The digital display will illuminate, showing the current temperature.
2. Nastavení teploty: Rotate the temperature adjustment knob to set the desired temperature. The range is 392-896°F (200-480°C). The display will show the set temperature briefly, then return to the actual tip temperature.
3. Výběr jednotky teploty: Press the °C/°F button to switch between Celsius and Fahrenheit display modes.
4. Kalibrace: If necessary, use the CAL adjustment point for temperature calibration. Refer to advanced user guides for detailed calibration procedures.
5. Pájení: Once the desired temperature is reached and stabilized, clean the soldering iron tip using the damp sponge or brass ball. Apply solder to the joint, not directly to the iron tip.
6. Vypnout: After use, turn off the power switch and allow the iron to cool completely in its holder before storing.

Image 5.1: YIHUA 939D+ in operation, highlighting temperature display and stabilization.

Image 5.2: The 939D+ heating quickly and maintaining temperature.

5.2 YIHUA 305D-IV Regulated DC Lab Power Supply Operation

1. Zapnutí: Press the 'POWER' button on the front panel. The LCD display will light up.
2. svtage Úprava: Použijte tlačítko „HLASITOST“TAGE' coarse and fine adjustment knobs to set the desired output voltage (0-30V). The display shows the current voltage nastavení.
3. Aktuální úprava: Use the 'CURRENT' coarse and fine adjustment knobs to set the desired current limit (0-5A). This acts as a maximum current draw for the connected device.
4. Konstantní svtage (CV) / Constant Current (CC) Modes: The unit automatically switches between CV and CC modes. When the load draws less current than the set limit, it operates in CV mode (maintaining set voltage). If the load attempts to draw more current than the set limit, it switches to CC mode (maintaining set current, voltage kapky).
5. Ochranné vlastnosti: The 305D-IV includes short-circuit protection and overcurrent protection. In case of a fault, the unit will limit output to protect itself and the connected device.
6. Vypnout: Press the 'POWER' button again to turn off the unit.

Image 5.3: YIHUA 305D-IV powering a small electronic project.

Image 5.4: YIHUA 305D-IV used for charging or powering applications.

6. Údržba

6.1 Soldering Iron Tip Maintenance

• Čištění: Regularly clean the soldering iron tip using the damp sponge or brass ball cleaner. This removes oxidation and old solder, extending tip life and improving heat transfer.
• Cínování: Po vyčištění a před uskladněním naneste na hrot malé množství čerstvé pájky (cínování). Tím chráníte hrot před oxidací.
• Výměna hrotu: If a tip becomes excessively worn or damaged, replace it with a new compatible YIHUA tip. Ensure the iron is cool before changing tips.

6.2 General Unit Cleaning

• Před čištěním se ujistěte, že jsou obě jednotky vypnuté a odpojené od sítě.
• Wipe the exterior surfaces of the soldering station and power supply with a soft, dry cloth.
• Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit casing nebo displej.
• Udržujte větrací otvory čisté od prachu a nečistot.

7. Řešení problémů

8. Specifikace

8.1 YIHUA 939D+ Digital Soldering Station

• Rozsah teplot: 392-896 °F (200-480 °C)
• Zobrazit: LCD
• Teplotní stabilita: PID controlled, ±3.6°F (±2°C)
• ESD Safe: Ano
• Vstupní objemtage: 110-127V AC

8.2 YIHUA 305D-IV Regulated DC Lab Power Supply

• Výstupní objemtage: 0-30V DC (Adjustable)
• Výstupní proud: 0-5A DC (Adjustable)
• Zobrazit: LCD
• Režimy: Konstantní svtage (CV), konstantní proud (CC)
• Ochrana: Short-circuit protection, Overcurrent protection
• Vstupní objemtage: 110-127V AC

9. Záruka a podpora

YIHUA poskytuje 12měsíční technická záruka výrobce exkluzivně v USA for this product bundle. For any technical assistance, troubleshooting, or warranty claims, please contact YIHUA customer support. Professional assistance is available 24/7 via Amazon.

For support, please visit the YIHUA store on Amazon or refer to your purchase documentation for contact details.