Uživatelská příručka k výrobníku zmrzliny GSEICE

1. Konec produktuview

The GSEICE ST16E is a high-efficiency soft serve ice cream machine designed for both home and light commercial use. Featuring a 5-inch LED screen, pre-cooling function, and patented double puffing technology, it delivers smooth, creamy ice cream with enhanced flavor and material utilization. Its compact design and user-friendly controls make it an ideal choice for various settings.

Figure 1: The GSEICE ST16E Soft Serve Ice Cream Machine.

Klíčové vlastnosti:

• High Efficiency & Output: Equipped with a 1.58-gallon tank and 0.42-gallon freezer tank, capable of producing up to 4.2 gallons per hour. First molding takes approximately 10 minutes.
• Double Puffing Technology: Improves puffing rate by 35%-45%, enhancing taste and optimizing raw material usage.
• 5palcová LED obrazovka: Intuitive interface for easy control of freezing, hardness adjustment, defrosting, and cleaning functions.
• Pre-Cooling & Fresh-Keeping: Saves energy and maintains product freshness.
• User-Friendly & Easy to Clean: Features a one-touch automatic wash cycle for simplified maintenance.
• Odolná konstrukce: Built with high-quality materials for continuous use.

2. Bezpečnostní pokyny

Před použitím stroje si pečlivě přečtěte všechny bezpečnostní pokyny, abyste předešli zranění nebo poškození.

• Vždy připojujte stroj k uzemněné zásuvce se správným napětímtage (120 V/60 Hz).
• Nepoužívejte stroj s poškozeným napájecím kabelem nebo zástrčkou.
• Během provozu držte ruce a cizí předměty v dostatečné vzdálenosti od pohyblivých částí.
• Zajistěte dostatečné větrání kolem stroje, aby nedošlo k jeho přehřátí.
• Neponořujte stroj do vody nebo jiných kapalin.
• Před čištěním nebo prováděním jakékoli údržby odpojte stroj ze zásuvky.
• Uchovávejte mimo dosah dětí.
• Operate the machine within the recommended working temperature range of 41℉ to 91.4℉.

3. Nastavení

Follow these steps for initial setup of your ice cream machine:

1. Rozbalení: Opatrně vyjměte stroj a veškeré příslušenství z obalu. Obal uschovejte pro budoucí přepravu nebo skladování.
2. Umístění: Place the machine on a stable, level surface. Ensure adequate clearance around the machine for ventilation. The compact design allows it to fit easily in various kitchen or party settings.
3. Počáteční čištění: Before first use, clean all parts that will come into contact with food. Refer to the 'Maintenance' section for detailed cleaning instructions.
4. Sestavte komponenty: Attach the dispensing handle and drip tray. Ensure all seals and O-rings are correctly seated.
5. Připojení napájení: Plug the machine into a suitable grounded electrical outlet.

Figure 2: Included accessories and parts for the ice cream machine.

4. Návod k obsluze

Operating your GSEICE ice cream machine is straightforward with its intuitive 5-inch LED screen and one-touch functions.

Figure 3: The 5-inch LED screen provides easy access to all machine functions.

Funkce ovládacího panelu:

• UMÝT: Spustí automatický čisticí cyklus.
• ZMRAZIT: Starts the freezing process for ice cream production.
• ZASTÁVKA: Zastaví aktuální operaci.
• SOUBOR: Used to adjust settings such as hardness.
• TVRDÉ/MĚKKÉ: Adjusts the desired hardness of the soft serve.
• UVOLNIT: Activates the defrosting function to thaw frozen ice cream for easier serving or cleaning.

Figure 4: Visual representation of screen functions including One-Touch Freeze and Hardness Adjustment.

Figure 5: The One-touch Thaw Function simplifies cleaning and serving.

Ice Cream Production Steps:

1. Příprava směsi: Prepare your ice cream or soft serve mix according to your recipe. The machine has a 1.58-gallon tank capacity.
2. Add Raw Material: Pour the prepared mix into the top hopper of the machine.


Figure 6: Steps for adding raw material and inserting the puff rod.

3. Insert Puff Rod: Ensure the air-pressurized puffing stick (puff rod) is correctly inserted into the mix. This activates the double puffing technology for improved texture and yield.

Figure 7: Diagram illustrating the double puffing technology within the machine.
4. Začněte mrazit: Press the 'FREEZE' button on the control panel. The machine will begin the freezing process. The first batch typically takes about 10 minutes, with subsequent batches ready in 4-6 minutes.
5. Sledovat průběh: The 5-inch LED screen displays real-time information, including temperature, hardness, and production status. You can adjust the hardness using the 'HARD' or 'SOFT' buttons.
6. Dávkování zmrzliny: Once the ice cream reaches the desired consistency, pull down the dispensing handle to serve.


Figure 8: Steps for dispensing the finished ice cream product.

Video Demonstration (Customer-Provided):

While no official seller videos are available, the following customer-provided video demonstrates the dispensing process of the ice cream machine. Please note that this video is not produced by GSEICE and may not represent all features or recommended procedures.

5. Údržba a čištění

Regular cleaning and maintenance are crucial for the longevity and hygienic operation of your ice cream machine. The machine features an automatic cleaning function.

Automatic Wash Cycle:

1. Prázdná nádrž: Ensure the mix tank is empty. If there's remaining ice cream, use the 'UNFREEZE' function to soften it for easier removal.
2. Přidat vodu: Pour clean water into the mix tank.

Figure 9: Steps for initiating the automatic cleaning cycle by adding water and pressing the wash button.
3. Press WASH: Press the 'WASH' button on the control panel. The machine will agitate the water to clean the internal components.


Figure 10: The one-touch cleaning button simplifies the cleaning process.

4. Vypustit vodu: Once the cycle is complete, drain the dirty water through the dispensing nozzle. Repeat if necessary.

Hloubkové čištění:

For thorough cleaning, especially after prolonged use or before storage:

• Odpojte stroj.
• Disassemble the dispensing handle, cylinder, and any removable parts according to the user guide (PDF document available).
• Wash all disassembled parts with warm, soapy water and a soft brush. Rinse thoroughly.
• Pay special attention to O-rings and seals, ensuring they are clean and free of residue. Replace if worn or damaged.
• Před opětovnou montáží nechte všechny díly zcela vyschnout na vzduchu.
• Otřete vnější část stroje reklamouamp tkanina.

6. Řešení problémů

This section addresses common issues you might encounter with your GSEICE ice cream machine.

7. Specifikace

8. Záruka a podpora

GSEICE is committed to providing quality products and customer satisfaction. For any questions, technical assistance, or warranty inquiries, please contact GSEICE customer support. While specific warranty details are not provided in this document, please refer to your purchase documentation or contact the seller for information regarding your product's warranty period.

You can also find additional information and a PDF version of the Instructions for Use via the following link: GSEICE Ice Cream Maker IFU (PDF)