Uživatelská příručka k ručnímu ovládání polohovacího křesla Okin

1. Konec produktuview

This manual provides instructions for the Okin Oval Shape 2 Button Hand Control Handset, designed as a replacement part for power recliners, lift chairs, and electric sofas. It features a 5-pin plug for connection to the recliner motor and two buttons for operation.

Figure 1: Okin Oval 2 Button Recliner Hand Control with its attached cable and 5-pin plug.

2. Bezpečnostní informace

POZOR:

• This is a replacement part for a power recliner. Always follow the manufacturer's instructions for safe installation and operation of your recliner.
• Keep the control away from water and other liquids to prevent electrical hazards.
• Do not attempt to repair or modify the electrical components of the hand control.
• In case of a malfunction, disconnect power to the recliner and contact a qualified technician or customer support immediately.

3. Nastavení a instalace

Before installation, ensure the power to your recliner is disconnected from the wall outlet.

1. Identifikujte připojovací port: Locate the existing hand control's connection port on your recliner's motor or control box. This is typically a 5-pin circular port.

Figure 2: The 5-pin plug of the hand control, designed for secure connection.
2. Připojení ručního ovladače: Align the 5-pin plug of the new Okin hand control with the corresponding port on your recliner. Gently push the plug in until it is firmly seated. The plug is designed with a 90-degree angle for easy connection in tight spaces.


Figure 3: Visual guide for connecting the 5-pin curved plug to the recliner motor.

3. Secure the Control (if applicable): If your recliner has a designated slot for the oval-shaped control, insert it securely. The control may come with a separate bezel for a flush fit.


Figure 4: The hand control shown with its removable oval bezel, which helps secure it in place.

4. Obnovit napájení: Once the control is securely connected, plug your recliner back into the wall outlet.

4. Návod k obsluze

The Okin Oval 2 Button Hand Control is designed for simple and intuitive operation of your power recliner.

Figure 5: The two-button interface of the hand control, with visible indicator lights.

• Indikátor napájení: A zelené LED světlo indicates that the control is receiving power.
• Provozní indikátor: An orange LED light illuminates when a button is pressed, indicating that an operation command is being sent to the motor.
• Funkce tlačítek:
  • Stiskněte tlačítko horní tlačítko to extend the recliner footrest and recline the backrest.
  • Stiskněte tlačítko spodní tlačítko to retract the recliner footrest and return the backrest to the upright position.

5. Údržba

To ensure the longevity and proper functioning of your Okin hand control, follow these simple maintenance guidelines:

• Čištění: Wipe the surface of the hand control with a clean, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the control. Do not use abrasive cleaners or solvents.
• Kontrola kabelů: Periodically check the cable for any signs of wear, fraying, or damage. If damage is observed, discontinue use and seek a replacement.
• Kontrola připojení: Ensure the 5-pin plug remains firmly connected to the recliner motor. A loose connection can lead to intermittent operation.
• Podmínky prostředí: Avoid exposing the control to extreme temperatures, direct sunlight for prolonged periods, or high humidity.

6. Řešení problémů

Pokud máte problémy s ručním ovladačem Okin, podívejte se na následující běžné problémy a jejich řešení:

Pokud kroky pro řešení potíží problém nevyřeší, kontaktujte prosím zákaznickou podporu.

7. Specifikace

8. Zákaznická podpora

For any questions, concerns, or assistance with your Okin Recliner Hand Control, please contact our dedicated support team. We are committed to ensuring a seamless setup process and satisfactory experience.

Refer to your product packaging or the retailer's webweb pro konkrétní kontaktní informace.