Zavedení
This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your GBC ShredMaster AUTO+ 50X Auto Feed Cross Cut Shredder. Please read this manual thoroughly before using the shredder and retain it for future reference.
The GBC ShredMaster AUTO+ 50X is designed for shredding paper documents and credit cards, offering a P-4 security level for confidential information. It features both automatic and manual feed options for convenience.
Bezpečnostní informace
- Udržujte ruce, vlasy a volné oblečení v dostatečné vzdálenosti od vstupního otvoru pro papír.
- Udržujte děti a domácí zvířata mimo dosah drtiče.
- Do not spray any flammable products onto the shredder or use near flammable materials.
- Před přemisťováním, čištěním nebo vyprazdňováním odpadkového koše odpojte drtič ze zásuvky.
- Do not shred metal objects, large paper clips, or adhesive labels as these can damage the cutting mechanism. Small paper clips and staples are generally acceptable for this model.
- Operate the shredder on a flat, stable surface.
Nastavení
- Rozbalení: Carefully remove the shredder from its packaging. Ensure all packing materials are removed from around the shredder and inside the waste bin.
- Umístění: Position the shredder on a level, stable surface near a power outlet. Ensure there is adequate space around the unit for ventilation and access to the waste bin.
- Připojení napájení: Zapojte napájecí kabel do standardní elektrické zásuvky.
- Odpadkový koš: Ensure the waste bin is correctly inserted into the shredder housing. The shredder will not operate if the bin is not properly seated.

Návod k obsluze
Konec ovládacího paneluview
The control panel features intuitive touch controls for easy operation.

Automatic Feed Operation
The AUTO+ 50X features an automatic feed tray for shredding up to 50 sheets of 80 gsm paper at once.
- Ujistěte se, že je drtič zapojen do zásuvky a že je odpadkový koš správně vložen.
- Lift the automatic feed tray cover.
- Stack up to 50 sheets of paper neatly into the automatic feed tray. Ensure there are no folded or crumpled sheets.
- Close the automatic feed tray cover. The shredder will automatically detect the paper and begin shredding.


Provoz ručního podávání
For smaller quantities of paper (up to 6 sheets of 80 gsm) or credit cards, use the manual feed slot.
- Ujistěte se, že je drtič zapojen do zásuvky a že je odpadkový koš správně vložen.
- Insert paper or a credit card into the manual feed slot. The shredder will automatically start and stop.
- For credit cards, insert one card at a time into the designated slot.


Ochrana proti přehřátí
To prevent motor overheating, the shredder is equipped with an automatic thermal overload protection system. After approximately 10 minutes of continuous shredding, the machine will automatically rest for 45 minutes to cool down. During this cool-down period, the shredder will not operate. Resume operation once the cool-down period is complete.
Údržba
Vyprázdnění odpadkového koše
The shredder features an easy-to-empty 20-liter pull-out bin with a viewing window to monitor fill levels.
- Odpojte skartovač ze zásuvky.
- Pull out the waste bin from the front of the shredder.
- Empty the shredded material into a suitable receptacle.
- Slide the waste bin back into the shredder until it is securely seated.
- Plug the shredder back into the power outlet.

Mazání drtiče
Regular oiling of the shredder blades is recommended to maintain optimal performance and extend the life of your shredder. Use GBC shredder oil or a vegetable-based oil (avoid aerosol oils).
- Naneste tenkou vrstvu oleje do skartovačky přes vstupní otvor pro papír.
- Run the shredder in reverse for 10 seconds to distribute the oil.
- Repeat this process after every 30 minutes of accumulated shredding or at least twice a month.
Čištění
Vnější povrch skartovačky otřete měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Skartovač se nespustí. |
|
|
| Zaseknutý papír. |
|
|
| Drtič běží pomalu nebo vydává neobvyklý zvuk. |
|
|
Specifikace
- Model: G2020050X
- Typ skartace: Příčný řez
- Úroveň zabezpečení: P-4 (DIN 66399)
- Velikost kousku: 4 x 28 mm confetti cut
- Auto Feed Capacity: 50 listů (80 g/mXNUMX)
- Kapacita ručního podávání: 6 listů (80 g/mXNUMX)
- Skartuje: Paper, small paper clips, staples, credit cards
- Kapacita přihrádky: 20 litrů
- Doba běhu: 10 minutes continuous, 45 minutes cool-down
- Přibližné rozměry (V x Š x H): 40.6 cm x 43.2 cm x 38.1 cm (16" H x 17" W x 15" D, based on product images)
- Hmotnost: 11.6 kg
- Zdroj napájení: Elektrický kabel
- Speciální vlastnosti: Automatic Start/Stop, Jam Proof

Záruka a podpora
For warranty information and customer support, please refer to the documentation included with your purchase or visit the official GBC webUschovejte si doklad o koupi pro případ reklamace.
For further assistance, you may contact GBC customer service through their official channels. Details are typically available on the manufacturer's webmísto nebo obal produktu.