OREI EX-230C 4K@30Hz HDMI Extender Over Cat6 230ft User Manual

Zavedení

The OREI EX-230C HDMI Extender allows for the transmission of HDMI signals over a single Cat6/7 LAN cable. This device supports 4K@30Hz resolution up to 130 feet and Full 1080P signal up to 230 feet. It features Power over Cable (PoC) technology, requiring only one power adapter for both transmitter and receiver units. The extender also includes an HDMI loop-out on the transmitter and one-way IR control for convenient operation of the source device from the display location. It is HDCP 1.4 compliant and supports EDID management, Deep Color, and LPCM 7.1 audio.

Obsah balení

Prosím, ověřte, zda je ve vašem balíčku obsaženo vše:

• 1x HDMI Transmitter (TX) Unit
• 1x HDMI Receiver (RX) Unit
• 1x Power Supply Adapter (DC 12V)
• 1x IR Blaster kabel
• 1x kabel IR přijímače
• 1x Produktový manuál

Image: Components included in the OREI EX-230C package.

Vlastnosti

• Extends HDMI signal up to 230 feet (70 meters) for 1080P resolution.
• Extends HDMI signal up to 130 feet (40 meters) for 4K@30Hz resolution.
• Supports Power over Cable (PoC) technology, requiring power only at the transmitter.
• HDMI Loop Out port on the transmitter for a local display.
• One-way IR control allows source device control from the receiver location.
• Supports EDID Copy function (local or remote EDID selection).
• Compatible with HDMI 480i/p, 576i/p, 720p, 1080i/p, 2K@60Hz, and 4K@30Hz.
• Supports audio formats including PCM7.1, Dolby True HD, and DTS HD.
• Vyhovuje HDCP 1.4.
• Compact size with heavy-duty metal enclosure.

Image: Key features including PoC support and extension distances.

Specifikace

Image: Dimensions and technical specifications of the EX-230C units.

Průvodce nastavením

Pro nastavení HDMI extenderu OREI EX-230C postupujte takto:

1. Vypínací zařízení: Ensure all devices (source, display, extender units) are powered off before making connections.
2. Connect HDMI Source to Transmitter (TX): Connect your HDMI source device (e.g., Blu-ray player, game console, PC) to the HDMI-IN port on the Transmitter unit using a high-quality HDMI cable.
3. Připojení lokálního displeje (volitelné): If you wish to have a local display near your source, connect it to the HDMI OUT (smyčkový výstup) port on the Transmitter unit using an HDMI cable.
4. Connect Cat Cable: Connect a single CAT5e/CAT6/CAT7 Ethernet cable (shielded cable recommended for optimal performance) between the KOCOUR port on the Transmitter unit and the KOCOUR port na přijímací jednotce.
5. Connect Display to Receiver (RX): Connect your remote display device (e.g., TV, projector) to the HDMI OUT port on the Receiver unit using a high-quality HDMI cable.
6. Připojení IR kabelů:
   • Připojte kabel IR Blasteru k IR OUT port on the Transmitter unit and place the IR emitter eye near the IR sensor of your source device.
   • Connect the IR Receiver cable to the IR IN port on the Receiver unit and place the IR receiver eye in a location where it can receive signals from your remote control.
7. Použít napájení: Připojte dodaný napájecí adaptér k DC 12V port on the Transmitter unit. Due to PoC (Power over Cable) technology, the Receiver unit will be powered automatically through the Ethernet cable.
8. Zapnutí zařízení: Nejprve zapněte zobrazovací zařízení a poté zařízení s HDMI vstupem.

Image: Wiring diagram for connecting the HDMI extender units.

Obrázek: Overview of the transmitter and receiver units with port labels.

Návod k obsluze

Správa EDID

The EX-230C supports EDID Copy functionality. This allows the extender to learn the EDID (Extended Display Identification Data) from either the local display connected to the transmitter's loop-out or the remote display connected to the receiver. This ensures optimal compatibility between your source and display devices.

• Local EDID: If the EDID switch is set to TX, the extender will copy the EDID from the display connected to the HDMI Loop Out port on the Transmitter.
• Remote EDID: If the EDID switch is set to RX, the extender will copy the EDID from the display connected to the HDMI OUT port on the Receiver.

It is recommended to set the EDID switch to the desired display's location before powering on the system to ensure proper EDID negotiation.

IR ovládání

The one-way IR feature enables you to control your HDMI source device (e.g., cable box, DVD player) from the remote display location. Point your source device's remote control at the IR Receiver eye connected to the Receiver unit. The signal will be transmitted back to the IR Blaster connected to the Transmitter unit, which will then relay the command to your source device.

Image: Illustration of IR transmission functionality.

Údržba

To ensure the longevity and optimal performance of your OREI EX-230C HDMI Extender, please follow these maintenance guidelines:

• Čištění: Use a soft, dry cloth to clean the exterior of the units. Avoid using liquid or aerosol cleaners, as they may damage the device.
• Větrání: Zajistěte, aby jednotky byly umístěny v dobře větraném prostoru, aby se zabránilo přehřátí. Neblokujte žádné větrací otvory.
• Správa kabelů: Udržujte kabely úhledně uspořádané a vyvarujte se ostrých ohybů nebo nadměrného napětí, které by mohlo poškodit kabely nebo porty.
• Podmínky prostředí: Operate the device within its specified temperature and humidity ranges. Avoid extreme temperatures, direct sunlight, and high humidity.
• Odpojení napájení: If the device will not be used for an extended period, disconnect the power adapter from the electrical outlet.

Odstraňování problémů

If you encounter issues with your OREI EX-230C HDMI Extender, please refer to the following common problems and solutions:

• No Picture or Intermittent Signal:
  • Ověřte, zda jsou všechny kabely HDMI a Ethernet bezpečně připojeny.
  • Ensure the power adapter is connected to the Transmitter unit and the power LED is on.
  • Try using shorter or higher-quality (shielded CAT6/7) Ethernet and HDMI cables.
  • Check if the resolution and refresh rate of your source device are supported by the extender and display.
  • Cycle power to all devices (source, extender, display) by unplugging and replugging them.
  • Adjust the EDID switch on the Transmitter (TX) unit to either TX or RX position and re-power the system to ensure proper EDID negotiation.
• Picture Quality Issues (Flickering, Distortion, Color Problems):
  • Ensure you are using a high-quality CAT6/7 Ethernet cable, preferably shielded.
  • Reduce the length of the Ethernet cable if it exceeds the recommended distance for your resolution (130ft for 4K@30Hz, 230ft for 1080P).
  • Check for strong electromagnetic interference near the Ethernet cable.
  • Vyzkoušejte s různými HDMI kabely.
• IR ovládání nefunguje:
  • Ensure the IR Blaster cable is securely plugged into the Transmitter's IR OUT port and its emitter eye is directly facing the IR sensor of the source device.
  • Ensure the IR Receiver cable is securely plugged into the Receiver's IR IN port and its receiver eye is positioned to receive signals from your remote control.
  • Verify that your remote control has fresh batteries and is functioning correctly.
• Audio Issues (No Audio or Distorted Audio):
  • Zkontrolujte připojení kabelu HDMI.
  • Ensure your display and source devices are configured for compatible audio output.
  • Verify the audio format is supported by the extender (PCM7.1, Dolby True HD, DTS HD).

Záruka a podpora

The OREI EX-230C HDMI Extender comes with a 1letá záruka výrobce. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.

For technical support, warranty claims, or any questions regarding your product, please contact OREI customer service:

• E-mail: info@orei.com
• Kontaktní údaje výrobce: info@orei.com
• Packer Contact Information: info@fayzelectronics.com , 99250 12671
• Online podpora: Navštivte OREI Store on Amazon pro další zdroje a informace o produktech.

Uschovejte si prosím doklad o koupi pro případ záručního servisu.