RESUXI Professional Hair Clippers User Manual

1. Úvod

Thank you for choosing the RESUXI Professional Men's Hair Clippers. This cordless, zero-gapped, T-blade trimmer is designed for precision and ease of use, featuring a waterproof design and an LED display. It is ideal for detailed beard shaving, edging, lining, and general hair cutting. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new clippers to ensure optimal performance and longevity.

Obsah balení:

• RESUXI Hair Clippers (Main Unit)
• 3 x Length Guide Combs (1mm, 2mm, 3mm)
• USB nabíjecí kabel
• Čisticí kartáč
• Uživatelská příručka

Konecview of the RESUXI Professional Hair Clippers and its included accessories, such as the main unit, three guide combs, USB charging cable, and cleaning brush.

2. Bezpečnostní informace

Please read all safety instructions carefully before using the RESUXI hair clippers to ensure safe and proper operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.

Obecná bezpečnostní opatření:

• Keep the appliance dry. Do not use it in or near water, except for rinsing the blade head as instructed.
• Do not immerse the main body of the appliance in water.
• Uchovávejte mimo dosah dětí.
• Do not disassemble or attempt to repair the appliance yourself. Contact qualified service personnel if needed.
• Používejte pouze dodaný nabíjecí kabel.
• Před čištěním nebo pokud spotřebič delší dobu nepoužíváte, odpojte jej ze zásuvky.
• Avoid dropping the appliance.
• Do not use if the blade is damaged or bent, as this may cause injury.

3. Nastavení

Charging the Clippers:

1. Ensure the clippers are turned off before charging.
2. Insert the USB charging cable into the charging port at the bottom of the clippers.
3. Druhý konec kabelu USB připojte ke kompatibilnímu napájecímu adaptéru USB (není součástí balení) nebo k portu USB v počítači.
4. The LED display will illuminate and show the charging progress. A full charge takes approximately 1.5 hours.
5. Po plném nabití se na displeji zobrazí 100 %. Odpojte nabíjecí kabel.

The clippers feature a USB charging design, allowing for convenient charging via various USB power sources. A full charge is typically achieved in 1.5 hours, providing up to 90 minutes of working time.

Připevnění vodicích hřebenů:

1. Select the desired length guide comb (1mm, 2mm, or 3mm).
2. Align the comb with the clipper blade and push firmly until it clicks securely into place.
3. To remove a comb, gently pull it away from the blade.

The package includes three different length limit combs (1mm, 2mm, 3mm) for versatile styling options and precise hair cutting lengths.

4. Návod k obsluze

Zapnutí/vypnutí:

Press the power button located at the bottom of the clippers to turn the device on or off. The smart digital LED display will illuminate upon activation, showing the current battery percentage a další ukazatele.

Key features of the RESUXI clippers, including the durable stainless steel blade, convenient bottom charging, intricately engraved body, and a smart LCD display showing power levels.

Hair Cutting and Trimming:

1. Ensure hair is clean and dry before trimming for optimal results.
2. For general cutting, comb hair in the direction of growth.
3. If unsure of the desired length, start with a longer guide comb and gradually switch to shorter ones.
4. Hold the clippers with the blade flat against the skin and move slowly against the direction of hair growth.
5. Use the zero-gapped T-blade for precise edging, outlining, and intricate detail work, such as hair art carving.

Showcasing the precision of the RESUXI clippers for fast balding, intricate engraving, and achieving sharp, clean lines for new hairstyles, capable of cutting hair as short as 0.01mm.

5. Údržba a čištění

Čištění nožů:

1. After each use, turn off the clippers and remove any attached guide comb.
2. Use the provided cleaning brush to brush away loose hairs from the blade and cutting head.
3. The clippers feature an IPX4 waterproof design, allowing the blade head to be rinsed directly under running water for convenient cleaning. Do not submerge the entire unit.
4. Allow the blade to air dry completely before storing or reattaching the comb.

The RESUXI clippers feature an IPX4 water washable design, making the blade easy to clean by rinsing under running water. Ensure the main body is not submerged.

Mazání čepelí:

Regularly oiling the blades helps maintain their sharpness, reduces friction, and extends the life of the clippers. Apply a small drop of clipper oil (not included) to the teeth of the blade after every few uses or when the LCD display indicates an oil reminder. Turn on the clippers for a few seconds to distribute the oil evenly across the blades.

6. Řešení problémů

7. Specifikace

• Model: JM-711
• Značka: RESUXI
• Materiál čepele: Nerez
• Zdroj napájení: Napájení z baterie (nabíjení přes USB)
• Typ baterie: Lithium Battery 14500
• Kapacita baterie: 600 XNUMX mAh
• Doba nabíjení: Přibližně 1.5 hodin
• Pracovní doba: Až 90 minut
• Hodnocení voděodolnosti: IPX4 (odolné proti stříkající vodě)
• Rychlost motoru: 6500 ± 500rpm
• svtage: 110-240V 50/60Hz
• Moc: 10W
• Barva: Zlato
• Rozměry: 7.52 x 3.54 x 1.85 palce
• Hmotnost: 11.36 unce

8. Záruka a podpora

For detailed warranty information and customer support, please refer to the warranty card included with your product. Keep your purchase receipt as proof of purchase for any warranty claims.

Kontaktní údaje:

• Značková prodejna: RESUXI Amazon Store
• For further assistance, please visit the official RESUXI webwebu nebo kontaktujte jejich specializovaný tým podpory.