1. Úvod
Thank you for choosing the Ergotron HX HD Premium Heavy Duty Gaming Monitor Arm. This monitor arm is designed to provide robust support and flexible positioning for large, curved ultrawide monitors, enhancing your ergonomic setup and reclaiming valuable desk space. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.
2. Co je v krabici
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- HX Desk Monitor Arm with HD Pivot (White)
- Rozšíření
- Stůl Clamp
- Držák průchodky
- Montážní hardware
Figure 2.1: Included components for the Ergotron HX Monitor Arm.
3. Specifikace produktu
| Číslo modelu | 45-647-216 |
| Rozměry produktu | 18.6 x 11.2 x 7.7 palce |
| Hmotnost položky | 18.3 libry |
| Materiál | Kov |
| Barva | Bílý |
| Typ montáže | Držák na stůl (Desk Clamp nebo průchodka) |
| Typ pohybu | Artikulační |
| Kompatibilní zařízení | Monitors up to 49 inches, 28 to 42 lbs |
| Kompatibilita VESA | 75x75mm, 100x100mm |
| Maximální úhel náklonu | 20 stupňů |
| Rozsah zdvihu | 11.5 inches (screen rises 17.8 inches from worksurface) |
| Otáčení | 360 stupňů |
| Stůl Clamp Tloušťka | 0.4 až 2.6 palce (1–6.6 cm) |
| Grommet Mount Hole Diameter | 0.4 až 2 palce (1–5.1 cm) |
Figure 3.1: Ergotron HX Monitor Arm dimensions and range of motion.
Figure 3.2: Vertical lift range of the monitor arm.
Figure 3.3: Horizontal reach and dimensions of the monitor arm.
4. Nastavení a instalace
The Ergotron HX Monitor Arm offers two primary mounting options: a desk clamp for surface edges and a grommet mount for installation through a surface hole. Ensure your desk surface meets the specified thickness requirements for your chosen mounting method.
4.1. Výběr způsobu montáže
- Stůl Clamp: Suitable for desk edges 0.4 to 2.6 inches (1-6.6 cm) thick.
- Grommet Mount: Requires a surface hole with a diameter of 0.4 to 2 inches (1-5.1 cm) and a desk thickness of up to 2.8 inches (7.2 cm).
Obrázek 4.1: Stůl clamp and grommet mount options with dimensions.
4.2. Monitor Compatibility (VESA)
The monitor arm is compatible with VESA patterns 75x75mm and 100x100mm. It supports monitors up to 49 inches and weighing between 28 to 42 lbs (12.7 to 19.1 kg).
Figure 4.2: Compatibility with 1000R curved ultrawide monitors.
4.3. Kroky instalace
For detailed visual instructions, please refer to the official installation video below. The video demonstrates the process for mounting the HX Monitor Arm with HD Heavy-Duty Pivot, including VESA mount installation and tension adjustments.
Video 4.1: How to Install the HX Monitor Arm with HD Heavy-Duty Pivot. This video provides a step-by-step guide for mounting the monitor arm, including attaching the VESA plate to the monitor, securing the arm to the desk, and making initial tension adjustments.
5. Návod k obsluze
The Ergotron HX Monitor Arm is designed for fluid and effortless adjustments, allowing you to customize your viewzkušenosti.
5.1. Nastavení polohy monitoru
The arm offers a full range of motion, including 11.5 inches of lift, allowing the screen to rise up to 17.8 inches from the worksurface. You can also rotate the monitor 360 degrees and tilt it 20 degrees to achieve optimal ergonomic positioning.
Video 5.1: HX Monitor Arm with HD Pivot: Top Features & Benefits. This video highlights the key features and benefits of the monitor arm, demonstrating its smooth movement, tilt, and rotation capabilities for an enhanced user experience.
Figure 5.1: Ergonomic positioning with the Ergotron HX Monitor Arm.
5.2. Adjusting Arm Tension
If the arm does not hold its position or is too stiff to move, you may need to adjust the tension. Use the provided Allen wrench to turn the tension screw. Turn clockwise to increase tension (for heavier monitors) or counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the arm holds the monitor securely in any position with minimal effort.
5.3. Správa kabelů
The monitor arm features integrated cable management to keep your workspace tidy. Route monitor cables through the designated channels along the arm to maintain a clean and organized setup.
Obrázek 5.2: Integrovaný systém správy kabelů.
6. Údržba
To ensure the longevity and smooth operation of your Ergotron HX Monitor Arm, perform the following maintenance:
- Čištění: Wipe down the arm with a soft, damp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Kontrola napětí: Periodically check the arm tension to ensure it is appropriate for your monitor's weight. Adjust as needed.
- Spojovací materiál: Ensure all mounting hardware and fasteners are securely tightened. Do not overtighten.
7. Řešení problémů
Pokud narazíte na problémy s ramenem monitoru, podívejte se na následující běžná řešení:
- Arm drifts down or up: Adjust the arm tension using the provided Allen wrench. Increase tension if the arm drifts down, decrease if it springs up.
- Monitor se chvěje: Ensure all mounting screws and the desk clamp/grommet mount are securely tightened. Check that the VESA plate is firmly attached to the monitor.
- Obtíže s pohybem paže: If the arm is too stiff, decrease the tension slightly. If it's too loose, increase the tension.
8. Důležité bezpečnostní informace
- Nepřekračujte maximální nosnost 19.1 kg (42 liber).
- Ensure the mounting surface is strong enough to support the combined weight of the arm and monitor.
- Keep children and pets away from the monitor arm during installation and adjustment.
- Always use two people when lifting and mounting heavy monitors onto the arm.
- Pečlivě si přečtěte a dodržujte všechny pokyny.
9. Záruka a podpora
Ergotron products are built to last and set the standard for quality. The Ergotron HX HD Premium Heavy Duty Gaming Monitor Arm comes with a 10-letá záruka. For technical support, warranty claims, or further assistance, please visit the official Ergotron webnebo kontaktujte jejich zákaznický servis.
Pro více informací a podporu navštivte: Ergotron Store on Amazon