Ymiko 810 E Bike LED Display Controller User Manual

1. Úvod

This user manual provides comprehensive instructions for the Ymiko 810 LED Display Controller. Please read this manual carefully before installation and operation to ensure correct usage and optimal performance of your electric bicycle or scooter system. This display unit is designed to provide essential information and control functions for compatible brushless motor speed controllers.

2. Konec produktuview

The Ymiko 810 LED Display Controller is a compact and durable unit designed for electric bicycles and scooters. It features an intuitive interface with LED indicators for battery level, power assist mode, and a 6km/h assist function. The controller connects to your e-bike system via a 5-wire cable, providing essential feedback and control.

Image 2.1: The Ymiko 810 LED Display Controller, showing the main unit and its coiled connection cable.

3. Klíčové vlastnosti

• LED displej: Clear indication of battery status and power assist levels.
• Odolná konstrukce: Lightweight, waterproof, and designed for longevity.
• Indikátor baterie: Vizuální znázornění zbývajícího nabití baterie.
• Power Assist Control: Allows selection of different power assist gears (Low, Medium, High).
• 6km/h Assist Function: Dedicated button for low-speed assistance.
• Automatický spánek: Enters sleep mode after 10 minutes of inactivity to conserve power.
• Indikace poruchy: Provides visual cues for system errors.
• Funkce paměti převodového stupně: Retains the last selected gear setting even after power failure.
• 5-Wire Digital Communication: Standardized connection for reliable data exchange with compatible controllers.

Obrázek 3.1: Detailní view of the Ymiko 810 display, highlighting the ON/OFF, 6km, and MODE buttons, along with power and assist level indicators.

4. Obsah balení

Balíček obvykle obsahuje:

• Ymiko 810 LED Display Controller with integrated 5-wire cable.

Note: Additional components for your e-bike system (e.g., motor, controller, battery) are sold separately.

5. Instalační příručka

Before proceeding with installation, ensure your electric bicycle or scooter's power is turned off and the battery is disconnected. Professional installation is recommended if you are unfamiliar with e-bike wiring.

5.1 Montáž displeje

1. Identify a suitable location on your handlebar for the display unit. Ensure it is easily accessible and does not obstruct other controls.
2. Loosen the screw on the display's mounting bracket.
3. Position the display on the handlebar and tighten the screw securely. Do not overtighten.

Image 5.1: The side profile of the Ymiko 810 display, illustrating the integrated handlebar mounting bracket.

5.2 Connecting the 5-Wire Cable

1. Locate the corresponding 5-wire connector on your e-bike's motor controller.
2. Carefully align the pins of the display's 5-wire connector with the controller's connector.
3. Pevně ​​zatlačte konektory k sobě, dokud nezacvaknou, čímž zajistíte bezpečné připojení.
4. Route the cable neatly along the frame, securing it with cable ties if necessary, to prevent interference with moving parts.

Obrázek 5.2: Detailní záběr view of the 5-wire connector, showing the distinct colored wires for proper connection.

Důležité: Ensure the connector type matches your controller. The Ymiko 810 uses a 5-wire connector. Some older systems may use a 4-wire connector, which is not compatible.

Image 5.3: This image illustrates the difference between the 5-wire (New Type) and 4-wire (Old Type) connectors. Verify your controller's connector type before installation.

6. Wiring Diagram (5-Wire Connector)

The 5-wire cable typically follows this color code for connection to a compatible e-bike controller:

• Červený drát: Pozitivní napájení (+)
• Modrý drát: Controller Power Control Line
• Černý drát: Mocnina záporná (-)
• Zelený drát: Data Receiving (RX)
• Žlutý drát: Data Transmitting (TX)

Always cross-reference with your motor controller's manual for specific wiring instructions. Incorrect wiring can damage the display or controller.

7. Provoz

Once installed and connected, the Ymiko 810 LED Display Controller provides intuitive control over your e-bike's basic functions.

7.1 Zapnutí/vypnutí

• Stiskněte tlačítko ON/OFF button to power on the display and the e-bike system.
• Stiskněte a podržte ON/OFF button for a few seconds to power off the system.

7.2 Power Assist Mode Selection

• Stiskněte tlačítko MODE button to cycle through the power assist levels: Low, Medium, and High.
• The corresponding LED indicator (LOW, MED, HIGH) will illuminate to show the currently selected assist level.

7.3 6km/h Assist Function

• Stiskněte a podržte 6 km button to activate the 6km/h assist function. This provides a steady low speed for walking alongside the bike or navigating crowded areas.
• Uvolněním tlačítka funkci deaktivujete.

7.4 Indikátor stavu baterie

The MOC LED indicators provide an approximate visual representation of the remaining battery charge. The number of illuminated LEDs decreases as the battery drains.

8. Údržba

• Čištění: Otřete displej měkkým hadříkemamp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Inspekce: Periodically check the cable and connector for any signs of wear or damage. Ensure the mounting bracket is secure.
• Vystavení vodě: While the unit is waterproof, avoid prolonged submersion or high-pressure washing.

9. Řešení problémů

10. Specifikace

11. Záruka a podpora

For warranty information or technical support, please refer to the documentation provided with your purchase or contact the seller directly. Keep your purchase receipt as proof of purchase.