Uživatelská příručka k palubní kameře IROAD NX7

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your IROAD NX7 Dash Cam. The IROAD NX7 is a high-performance 2-channel Full HD 1080P dash camera designed to record driving footage and provide parking surveillance. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• IROAD NX7 Main Unit (Front Camera)
• Zadní kamera
• Kabel pro připojení zadní kamery
• OBD-II Power Cable (for general and hybrid vehicles)
• 16GB MicroSD karta
• Uživatelská příručka (tento dokument)
• Adhesive Mounts
• Nabíjecí kabel
• GPS Antenna (optional add-on)

Image: IROAD NX7 Dash Cam main unit and rear camera, illustrating the primary components included in the package.

Konec produktuview

Seznamte se s komponenty a jejich funkcemi.

Image: Detailed diagram showing the front camera (main unit) and rear camera with labeled parts such as camera lens, security LED, operation LED, bracket, DC-IN power terminal, GPS terminal, power switch, memory card slot, front terminal, and rear camera lens.

Main Unit (Front Camera)

• Objektiv předního fotoaparátu: Zaznamenává view through the front windshield.
• Bezpečnostní LED: Indicates recording status and acts as a security deterrent.
• Provozní LED: Shows the device's operational status.
• 3-inch Touch Panel Display: Pro viewing live footage, playback, and accessing settings.
• Slot pro microSD kartu: Insert the provided MicroSD card for video storage.
• Vypínač: Pro zapnutí nebo vypnutí zařízení.
• DC-IN Power Terminal: Připojuje se k napájecímu kabelu.
• GPS Terminal: Connects to the optional GPS antenna for location and speed data.
• Rear Camera Terminal: Connects the rear camera cable.

Zadní kamera

• Objektiv zadního fotoaparátu: Zaznamenává view through the rear windshield.
• Provozní LED: Indicates the rear camera's operational status.

Nastavení

1. Vložení karty MicroSD

1. Ujistěte se, že je palubní kamera vypnutá.
2. Locate the MicroSD card slot on the side of the main unit.
3. Insert the provided 16GB MicroSD card into the slot until it clicks into place. Ensure the correct orientation.

2. Main Unit Installation (Front Camera)

1. Clean the area on your front windshield where you intend to mount the dash cam.
2. Attach the adhesive mount to the main unit.
3. Odstraňte ochrannou fólii z lepicího držáku.
4. Firmly press the dash cam onto the chosen spot on the windshield, ensuring a clear view of the road. Position it centrally, behind the rearview mirror if possible, to avoid obstructing your view.

3. Instalace zadní kamery

1. Clean the area on your rear windshield for the rear camera.
2. Attach the adhesive mount to the rear camera.
3. Remove the protective film and firmly press the rear camera onto the rear windshield, ensuring a clear view.
4. Connect the rear camera to the main unit using the provided rear camera connection cable. Route the cable neatly along the vehicle's headliner and pillars to conceal it.

4. Power Connection (OBD-II)

1. Vyhledejte port OBD-II vašeho vozidla (obvykle pod palubní deskou na straně řidiče).
2. Connect the OBD-II power cable to the OBD-II port.
3. Connect the other end of the OBD-II power cable to the DC-IN power terminal on the main unit.
4. Route the power cable neatly to avoid interference with driving controls.

5. GPS Antenna Connection (Optional)

1. If using the optional GPS antenna, connect it to the GPS terminal on the main unit.
2. Namontujte anténu GPS na místo s volným view oblohy, obvykle na palubní desce nebo poblíž čelního skla.

Návod k obsluze

Zapnutí/vypnutí

• Zapnutí: Once connected to power, the dash cam will automatically power on when the vehicle's ignition is turned on.
• Vypnout: The dash cam will automatically power off when the vehicle's ignition is turned off. You can also manually power off using the power switch.

Režimy záznamu

The IROAD NX7 supports various recording modes:

• Nepřetržité nahrávání: Automatically starts recording when the device powers on. Footage is saved in short segments and overwritten by new recordings once the MicroSD card is full (loop recording).
• Event Recording (Impact Recording): When an impact is detected by the G-sensor, the dash cam automatically saves the current footage as an event file, čímž se zabrání jeho přepsání.
• Parking Surveillance (24-hour Recording):
  • Detekce pohybu: Records automatically when motion is detected around the vehicle while parked.
  • Impact Recording: Zaznamenává detekci nárazu při parkování.

  Note: Parking surveillance requires a continuous power supply, typically provided by the OBD-II cable.

Ovládání dotykovým panelem

The 3-inch touch panel allows for easy navigation and control:

• Tap icons to access menus, settings, and playback.
• Swipe to navigate through lists or video files.
• Adjust settings such as recording resolution, G-sensor sensitivity, and parking mode options.

Viewnahrávky

• Na zařízení: Access the playback menu on the touch screen to view recorded videos directly.
• Na počítači: Remove the MicroSD card from the dash cam and insert it into a computer's card reader. Use the dedicated IROAD PC Viewer software (available for download from the IROAD webmísto) na view a spravovat nahrávky.

LED Signal Compatibility

The IROAD NX7 is designed to minimize flicker when recording LED traffic signals, ensuring clear capture of signal lights.

Údržba

Správa karet MicroSD

• Běžné formátování: It is recommended to format the MicroSD card regularly (e.g., once a month) to maintain optimal recording performance and prevent data corruption. This can usually be done through the dash cam's settings menu or via the PC Viewer software.
• Životnost karty: MicroSD cards have a limited lifespan due to continuous writing cycles. Replace the card if you experience frequent recording errors or data loss.

Čištění zařízení

• Use a soft, dry cloth to clean the dash cam's body and lenses.
• Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit zařízení.
• Ensure the lenses are clean and free of smudges for clear video quality.

Odstraňování problémů

Specifikace

Záruka a podpora

Specific warranty information for the IROAD NX7 Dash Cam is typically provided with the product packaging or can be found on the official IROAD website. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please refer to the contact information provided by your retailer or the IROAD official support channels.

Always ensure you are using official IROAD accessories and software for optimal performance and to maintain warranty validity.