Hirsch 8352ABTRXSK TS ScramblePad SC Instruction Manual

1. Úvod

This manual provides essential information for the installation, operation, and maintenance of the Hirsch 8352ABTRXSK TS ScramblePad SC. This device is a high-security contactless keypad with an integrated smart card reader, designed for secure access control in sensitive environments. Please read this manual thoroughly before attempting to install or operate the device.

2. Bezpečnostní informace

Dodržujte následující bezpečnostní opatření, abyste zabránili poškození zařízení nebo zranění osob:

• Instalaci by měl provádět pouze kvalifikovaný personál.
• Před instalací nebo servisem se ujistěte, že je odpojeno veškeré napájení.
• Nevystavujte zařízení extrémním teplotám, vlhkosti nebo korozivním látkám.
• Use only manufacturer-approved components and accessories.
• Dodržujte všechny místní elektrotechnické předpisy a předpisy.

3. Konec produktuview

The Hirsch 8352ABTRXSK TS ScramblePad SC is an advanced security device offering two-factor authentication. It combines a randomizing keypad with both contactless and contact smart card reading capabilities. Its design is specifically engineered to prevent unauthorized code acquisition through pattern recognition and to mitigate keypad wear that could reveal frequently used digits.

Klíčové vlastnosti:

• High-security scramble keypad with dynamic digit display.
• Integrated contactless smart card reader (uTrust TS Reader module).
• Integrated contact smart card reader (Identiv-specific SmartOS).
• View restrictors to limit visibility of displayed digits to the direct user.
• Approved for FIPS201/FICAM environments.

Obrázek 1: Přední view of the Hirsch 8352ABTRXSK TS ScramblePad SC, showing the keypad and card reader slots. This image illustrates the compact design and the visible scramble pad interface.

4. Nastavení a instalace

This section outlines the general steps for setting up and installing the ScramblePad SC. For detailed wiring diagrams and specific mounting instructions, refer to the separate installation guide provided with the product.

4.1 Montáž zařízení

1. Choose a suitable mounting location, typically adjacent to the access point, ensuring clear line of sight for the user.
2. Drill mounting holes according to the provided template.
3. Secure the backplate to the wall using appropriate fasteners.
4. Route necessary wiring through the wall opening to the device.

4.2 Zapojení kabeláže

Connect the ScramblePad SC to the access control panel using the specified wiring. Ensure correct polarity and secure connections for power, data (e.g., Wiegand, OSDP), and tamper spínače.

• Moc: Connect to a regulated 12V DC power supply.
• Data: Connect data lines (e.g., Data 0, Data 1) to the access control panel.
• Tamper: Připojit tamper output to the access control panel's tamper vstup.

4.3 Počáteční zapnutí

After all connections are secure, apply power to the device. The ScramblePad will perform a self-test, and the display will illuminate. Refer to your access control system's documentation for configuring the reader and enrolling users/cards.

5. Návod k obsluze

The Hirsch 8352ABTRXSK TS ScramblePad SC supports multiple modes of operation, typically configured by the access control system. Common access methods include PIN entry, smart card presentation, or a combination of both (two-factor authentication).

5.1 PIN Entry (ScramblePad Function)

1. Approach the ScramblePad. The digits on the keypad will randomize.
2. Enter your Personal Identification Number (PIN) using the displayed digits. The position of each digit changes with every entry, preventing pattern recognition.
3. Stiskněte tlačítko ENTER key (usually marked with a checkmark or similar symbol).
4. The device will communicate with the access control panel to verify the PIN.

5.2 Smart Card Presentation (Contactless)

1. Present your contactless smart card (e.g., FIPS201 PIV card) to the designated reading area on the ScramblePad.
2. Hold the card steady until an audible beep or visual indicator confirms the card has been read.
3. The device will transmit the card data to the access control panel for verification.

5.3 Smart Card Insertion (Contact)

1. Insert your contact smart card into the card slot on the ScramblePad.
2. Ensure the card is fully inserted and oriented correctly.
3. The device will read the card data. Remove the card once verification is complete or instructed by the system.

5.4 Two-Factor Authentication

For enhanced security, the system may require both a smart card and a PIN. In this mode, you will typically present your card first, and then enter your PIN on the ScramblePad when prompted.

6. Údržba

The Hirsch 8352ABTRXSK TS ScramblePad SC is designed for minimal maintenance. Regular cleaning and periodic checks are recommended to ensure optimal performance.

6.1 Čištění

• Použijte měkký, damp hadříkem k čištění vnějšku zařízení.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the display and casing.
• Ensure no liquid enters the device through openings or seams.

6.2 Pravidelné kontroly

• Visually inspect the device for any signs of physical damage or tampering.
• Verify that all cables are securely connected and free from damage.
• Test the functionality of the keypad and card readers periodically to ensure proper operation.

7. Řešení problémů

This section provides solutions to common issues. If the problem persists, contact technical support.

8. Specifikace

9. Záruka a podpora

Hirsch products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty statement included with your purchase or visit the official Hirsch webUschovejte si doklad o koupi pro případ reklamace.

Technická podpora:

If you encounter issues that cannot be resolved using the troubleshooting guide, please contact Hirsch technical support. Have your product model number (8352ABTRXSK) and serial number ready when you call.

For the most up-to-date contact information, please visit the official Hirsch webmísto:

www.hirsch.com/support