ColorKey TrussPar Quad 3 GO User Manual

Zavedení

The ColorKey TrussPar Quad 3 GO is a battery-powered LED lighting fixture designed for professional stage and event lighting. Its compact, triangular design allows for versatile placement, including fitting inside truss legs for uplighting effects. This manual provides detailed instructions for setup, operation, and maintenance of your TrussPar Quad 3 GO.

Obrázek: Přední strana view of the ColorKey TrussPar Quad 3 GO, showcasing the digital display and control buttons.

Co je v krabici

• TrussPar Quad 3 GO Light Fixture
• IR dálkové ovládání
• Napájecí kabely

Klíčové vlastnosti

• Battery-powered LED tri-par truss warming fixture.
• Up to 15 hours of battery life on a single color, or 6 hours with all colors.
• Equipped with 3x10W 4-in-1 RGBW LEDs (Red, Green, Blue, White).
• Features a 16° beam angle for focused lighting.
• Supports 5 or 9 DMX channels for advanced control.
• Control options include DMX 512, Master/Slave, Auto, and Sound to Dimmer Mode.
• Includes an IR Remote for convenient operation.
• Integrated digital dimmer and strobe effects.

Komponenty produktu

Přední panel

Obrázek: Přední strana view of the fixture, showing the LED display and navigation buttons (MENU, UP, DN, ENTER) for accessing settings and modes.

• LED displej: Shows current mode, DMX address, and other settings.
• Ovládací tlačítka: MENU, UP, DN, ENTER for navigating and selecting options.

Zadní panel

Obrázek: Zadní view of the fixture, highlighting the Power In, Power Out, Power switch, Charge switch, and Battery switch.

• NAPÁJENÍ: IEC power input for connecting to mains power.
• VYPNUTÍ: IEC power output for daisy-chaining power to other fixtures.
• Vypínač: Zapíná nebo vypíná jednotku.
• CHARGE Switch: Activates or deactivates battery charging.
• BATTERY Switch: Engages or disengages battery power.

Boční panel

Obrázek: Boční view of the fixture, showing the 3-pin DMX In and DMX Out connectors for DMX control.

• DMX IN: 3-pin XLR input for DMX signal.
• DMX OUT: 3-pin XLR output for daisy-chaining DMX signal to other fixtures.

Truss Placement

Image: The triangular fixture positioned inside a metal truss, demonstrating its intended use for uplighting within stage structures.

Pokyny pro nastavení

1. Rozbalení: Carefully remove the fixture and all accessories from the packaging. Inspect for any damage.
2. Připojení napájení:
   • For continuous operation or charging, connect the supplied power cable to the POWER IN port and a suitable AC power outlet (AC100-240V; 50-60Hz).
   • Ensure the POWER switch is in the "ON" position.
   • To charge the battery, ensure the CHARGE switch is in the "ON" position. The fixture can be charged while in use.
3. Provoz na baterie: To operate solely on battery power, ensure the BATTERY switch is in the "ON" position and the power cable is disconnected or the POWER switch is off.
4. Montáž: The triangular design allows for placement inside truss legs. Use the 10mm thread for C-clamp mounting if desired. Ensure the fixture is securely mounted to prevent accidental falls.
5. Počáteční zapnutí: Once connected to power or using battery, turn on the POWER switch. The LED display will illuminate.

Provozní režimy

The TrussPar Quad 3 GO offers several operating modes, accessible via the on-board menu display or the included IR remote.

1. Manual Control (On-board Menu)

Use the MENU, UP, DN, and ENTER buttons to navigate through the display options. You can adjust settings such as DMX address, operating mode, color mixing, and strobe speed.

Image: The LED display of the fixture, showing menu options for configuration.

2. IR dálkové ovládání

The included IR remote provides convenient wireless control for basic functions and color selection without DMX. Point the remote directly at the IR sensor on the fixture.

Obrázek: Bývalý/áample of an IR remote control, similar to the one included, used to change colors and modes.

3. DMX 512 Control

For advanced control, connect the fixture to a DMX controller using 3-pin XLR cables. Set the DMX address and channel mode (5 or 9 channels) via the on-board menu. Refer to the DMX Channel Chart in the Specifications section for detailed channel assignments.

4. Režim Master/Slave

Link multiple TrussPar Quad 3 GO fixtures together. Set one unit as the "Master" and others as "Slave" units. The slave units will mirror the master's operation, allowing for synchronized lighting effects without a DMX controller.

5. Auto Mode

The fixture has several built-in automatic programs, including fade and chase effects. Select "Auto" mode from the menu and choose your desired program.

6. Sound to Dimmer Mode

In this unique mode, the fixture's digital dimmer responds to the beat of the music, creating dynamic lighting synchronized with audio. Select "Sound to Dimmer" from the menu to activate.

Údržba

• Čištění: Regularly clean the lens and housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
• Skladování: Pokud svítidlo nepoužíváte, skladujte jej v suchém a bezprašném prostředí.
• Péče o baterie: For optimal battery life, fully charge the unit before long-term storage and recharge every 3 months.
• Inspekce: Periodically check power cables and DMX connections for wear or damage.

Odstraňování problémů

Specifikace

Záruka a podpora

For warranty information, technical support, or service inquiries, please contact ColorKey customer service or visit the official ColorKey webUschovejte si doklad o koupi pro případ reklamace.

Výrobce: Barevný klíč

Číslo modelu: CKU-2060

UPC: 702706437462