Výkonový nástroj W5010
Performance Tool W5010 1500W Ceramic Electric Space Heater User Manual
Model: W5010 | Značka: Performance Tool
1. Důležité bezpečnostní pokyny
Please read and understand all safety instructions before using this electric space heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury. Keep this manual for future reference.
- Elektrická bezpečnost: This heater operates on 120 Volts, 12.5 Amps. Always plug the heater directly into a wall outlet. Never use with an extension cord, power strip, or surge protector, as this may create a fire hazard. Ensure the outlet is properly grounded.
- Umístění: Place the heater on a firm, level surface. Maintain a minimum distance of 3 feet (0.9 meters) from any combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains. Do not block air intakes or exhaust openings.
- Ochrana proti přehřátí: The heater is equipped with an overheat protection sensor that automatically shuts off the unit if it becomes too hot. If this occurs, unplug the heater, allow it to cool for 30 minutes, and then plug it back in. If it continues to shut off, contact customer support.
- Bezpečnost proti převrácení: This heater includes an automatic power disconnect in case it tips over. If the heater tips, it will automatically turn off. Place it upright on a stable surface to resume operation.
- vlhkost: Nepoužívejte ohřívač ve vlhkých nebo mokrých místech, jako jsou koupelny, prádelny nebo v blízkosti umyvadel. Nikdy neponořujte ohřívač do vody.
- Dozor: Nenechávejte ohřívač během používání bez dozoru. Udržujte děti a domácí zvířata v dostatečné vzdálenosti od ohřívače.
- Údržba: Nepokoušejte se opravovat nebo seřizovat žádné elektrické nebo mechanické funkce tohoto přístroje. Pokud tak učiníte, dojde ke ztrátě záruky.
- Návrh 65 Varování: Tento produkt může obsahovat chemikálie, o nichž je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné poškození reprodukce.
2. Konec produktuview
The Performance Tool W5010 is a compact 1500-watt ceramic electric space heater designed for efficient heating in small areas. It features a durable construction and user-friendly controls.

Obrázek 1: Přední strana view of the Performance Tool W5010 Ceramic Electric Space Heater. The heater is red with black accents, featuring a metal grille on the front and two control knobs on top.
Klíčové vlastnosti:
- Keramické topné těleso: Provides fast and consistent heat.
- Tři nastavení teploty: High (1500W), Low (750W), and Fan Only mode for versatile use.
- Nastavitelný termostat: Allows precise control over the desired room temperature.
- Stay-Cool Housing: Designed to remain safe to touch even during prolonged operation.
- Tubular Metal Base: Pivots to direct airflow high or low, ensuring targeted heating.
- Vestavěná rukojeť pro přenášení: Pro snadnou přenositelnost.
- Bezpečnostní funkce: Includes overheat protection and automatic tip-over shut-off.

Image 2: Diagram highlighting key features of the W5010 heater, including the built-in handle, power control, thermostat, stay-cool housing, protective screen, and tubular metal base.
3. Nastavení
Follow these steps to set up your Performance Tool W5010 heater:
- Rozbalit: Opatrně vyjměte ohřívač z obalu. Obal si uschovejte pro skladování nebo budoucí přepravu.
- Umístění: Place the heater on a stable, flat, and non-combustible surface. Ensure there is at least 3 feet (0.9 meters) of clear space around the heater from walls, furniture, and other objects. Do not place it on carpeting or rugs that may obstruct airflow.
- Připojení napájení: Ensure the heater's power control knob is in the 'OFF' position. Plug the heater directly into a standard 120V AC, 60Hz electrical outlet. Do not use extension cords or power strips.

Image 3: The W5010 heater positioned on a wooden floor in a workshop, demonstrating appropriate placement away from walls and objects.
4. Návod k obsluze
Your W5010 heater features two control knobs on the top for power and thermostat adjustments.

Obrázek 4: Nahoře view of the heater's control panel, showing the Power Control knob on the left and the Thermostat Control knob on the right.
Power Control Knob (Left Knob):
This knob controls the heater's operating mode.
- OFF: Úplně vypne topení.
- FANOUŠEK: Aktivuje pouze ventilátor, který cirkuluje vzduch bez ohřevu.
- NÍZKÝ (750 W): Poskytuje nízký tepelný výkon.
- VYSOKÁ (1500 W): Provides high heat output.
Thermostat Control Knob (Right Knob):
This knob allows you to set the desired temperature. The heater will cycle on and off to maintain this temperature.
- Nastavení teploty: Turn the thermostat knob clockwise towards 'HIGH' for warmer temperatures or counter-clockwise towards 'LOW' for cooler temperatures.
- Počáteční použití: For initial use, set the Power Control to 'HIGH' and the Thermostat Control to 'HIGH'. Once the room reaches a comfortable temperature, slowly turn the Thermostat Control counter-clockwise until the heater turns off. The heater will then maintain this temperature by cycling on and off.
5. Údržba
Pravidelná údržba zajistí optimální výkon a dlouhou životnost vašeho ohřívače.
- Čištění: Před čištěním vždy odpojte ohřívač ze zásuvky. Použijte měkký,amp hadříkem k otření vnějších povrchů. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla. Zajistěte, aby se do vnitřku ohřívače nedostala voda.
- Odstranění prachu: Pravidelně používejte vysavač s kartáčovým nástavcem k odstranění prachu z mřížek sání a výfuku vzduchu.
- Skladování: Pokud se ohřívač nepoužívá, skladujte jej na chladném a suchém místě. Doporučuje se skladovat jej v originálním obalu, aby byl chráněn před prachem a poškozením.
- Žádné díly opravitelné uživatelem: This heater contains no user-serviceable parts. Do not attempt to open or repair the unit yourself. Contact qualified service personnel if repairs are needed.
6. Řešení problémů
Pokud váš ohřívač nefunguje správně, podívejte se na následující běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Ohřívač se nezapne. | Jednotka není napájena. Power control knob is OFF. Aktivována ochrana proti přehřátí. Aktivován spínač ochrany proti převrácení. | Check if the heater is securely plugged into a working 120V outlet. Turn the power control knob to 'LOW' or 'HIGH'. Odpojte ohřívač ze zásuvky, počkejte 30 minut, než vychladne, a poté jej znovu zapojte. Ujistěte se, že topné těleso stojí na stabilním a rovném povrchu. |
| Ohřívač v režimu vytápění neprodukuje žádné teplo. | Nastavení termostatu je příliš nízké. Power control knob is on 'FAN' mode. | Increase the thermostat setting by turning the knob clockwise. Turn the power control knob to 'LOW' or 'HIGH'. |
| Topení se často zapíná a vypíná. | Thermostat is set too close to the ambient room temperature. | Adjust the thermostat setting slightly higher or lower to find a stable operating point. |
| Z ohřívače vychází zápach spáleniny. | Dust accumulation on heating element (common during first use or after storage). | This is usually normal for a short period. If the smell persists or is strong, unplug the heater and clean it as per maintenance instructions. If the issue continues, discontinue use and contact support. |
If you experience any issues not listed here, or if the problem persists after attempting the solutions, please contact Performance Tool customer support.
7. Specifikace
Detailed technical specifications for the Performance Tool W5010 Ceramic Electric Space Heater:
| Specifikace | Hodnota |
|---|---|
| Číslo modelu | W5010 |
| Výkon | 1500 W (vysoký), 750 W (nízký) |
| svtage | 120 voltů |
| Ampvymazat | 12.5 Amps |
| Výstup BTU | Až 5120 XNUMX BTU |
| Pokrytí topení | 150-200 čtverečních stop |
| Počet rychlostí | 3 (High, Low, Fan Only) |
| Rozměry produktu (D x Š x V) | 9.5 cm x 9.5 cm x 9.6 cm |
| Hmotnost položky | 4.5 libry |
| Speciální funkce | Fast Heating, Thermostat, Overheat Protection, Tip-Over Switch |
| Certifikace | cETL listed under #70-0546 |
8. Záruka a podpora
The Performance Tool W5010 Ceramic Electric Space Heater comes with a 1 rok omezená záruka. Please refer to the product packaging or the official Performance Tool webkonkrétní záruční podmínky naleznete na webových stránkách.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Performance Tool customer support. Contact information can typically be found on the product packaging or on the manufacturer's official webmísto.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.