Joomer 66FT 200 LED Color Changing String Lights Instruction Manual

1. Úvod

Thank you for choosing Joomer Color Changing String Lights. This manual provides essential information for the safe and efficient operation of your new lighting product. Please read it thoroughly before installation and use, and retain it for future reference.

2. Bezpečnostní informace

• Napájecí adaptér: Do not cover the power adapter during operation. Ensure it is placed in a well-ventilated area.
• Dálkové ovládání: Remove the insulation sheet from the remote control before use. Point the remote directly at the adapter for proper control.
• Funkce časovače: Avoid using timed power outlets when utilizing the built-in timer function to ensure accurate timing.
• Hodnocení voděodolnosti: The lights are IPX7 waterproof, suitable for outdoor use. However, ensure the power adapter connection is protected from direct water exposure.
• Instalace: Ensure all connections are secure before plugging in the lights. Do not attempt to modify or repair the product yourself.

3. Obsah balení

Your Joomer Color Changing String Lights package includes:

• 1 x Joomer 66FT 200 LED Color Changing String Lights
• 1 x 24V Low Voltage Plug (Power Adapter)
• 1 x Remote Control with Receiver
• 1 x Návod k obsluze (tento dokument)

Image: Contents of the Joomer 200 LED Color Changing String Lights package, including the coiled lights, remote control, and power adapter.

4. Nastavení

1. Rozbalit: Opatrně vyjměte všechny součásti z obalu.
2. Odvíjecí světla: Gently uncoil the string lights, ensuring they are not tangled.
3. Připojte napájecí adaptér: Connect the string lights to the 24V low voltagnapájecí adaptér. Ujistěte se, že je připojení pevné.
4. Vložte baterii dálkového ovládání: Remove the plastic insulation sheet from the remote control's battery compartment.
5. Umístění: Position the lights in your desired indoor or outdoor location. Ensure the power adapter is in a dry, protected area if used outdoors.
6. Připojit: Zapojte napájecí adaptér do standardní elektrické zásuvky.

Image: Joomer lights installed on a house and trees, demonstrating both warm white and multicolor settings.

5. Návod k obsluze

The Joomer Color Changing String Lights are operated using the included 21-key remote control. Ensure the remote is pointed directly at the power adapter's receiver for optimal functionality.

5.1 Funkce dálkového ovládání

Image: Detailed diagram of the 21-key remote control, highlighting buttons for power, color selection, modes, dimming, speed, and timer functions.

• ON/OFF: Stiskněte ON to turn lights on, VYPNUTO to turn lights off.
• ČASOVAČ VYPNUTÍ: Deactivates any active timer setting.
• Výběr barvy:
  • Teplá bílá: Activates warm white lighting.
  • Vícebarevné: Activates multicolor lighting.
  • MIX Color: Activates a blend of 50% Warm White and 50% Multicolor.
• Lighting Modes (6 Vivid Modes):
  • Trvale zapnuto: Lights remain constantly lit.
  • Slábnout: Světla pomalu slábnou a zhasínají.
  • Blikat: Lights flash rapidly.
  • Sekvenční: Lights cycle through different patterns.
  • Ve vlnách: Světla se rozsvěcují ve vlnovém vzoru.
  • Slo-Glo: Lights slowly glow on and off.
  • Dýchání: Lights gently brighten and dim.
  • Blikat: Lights twinkle randomly.
• Nastavení jasu: Použijte ☀+ a ☀- buttons to adjust brightness (100%, 75%, 50%, 25%).
• Nastavení rychlosti: Použijte Rychlost + a Rychlost- buttons to adjust the speed of dynamic modes (4 settings).
• Funkce časovače: Vyberte z 4H časovač, 6H časovačnebo 8H časovač to set the lights to automatically turn off after the selected duration and turn on again at the same time the next day.

5.2 Funkce paměti

The built-in memory chip retains your last selected mode settings (color, mode, brightness, speed, and timer) even after the lights are turned off and on again, or unplugged.

6. Propojení více sad

These string lights are designed for end-to-end connection, allowing you to extend your lighting display. You can connect up to 3 sets of Joomer 200 LED string lights, totaling 195 feet with 600 LEDs, from a single power source.

1. Locate the male connector at one end of a light set and the female connector at the other end.
2. Align the connectors of two sets and push them firmly together until they click into place.
3. Ensure the connection is sealed tightly to maintain waterproof integrity, especially for outdoor use.
4. Repeat for additional sets, up to a maximum of 3 sets.

Image: Illustration demonstrating how multiple sets of Joomer string lights can be connected end-to-end.

7. Údržba

• Čištění: Disconnect from power before cleaning. Wipe lights gently with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Skladování: When not in use, carefully coil the lights and store them in a cool, dry place away from direct sunlight. Avoid tangling to prevent damage to the wires.
• Inspekce: Periodically inspect the lights, wires, and adapter for any signs of damage. Discontinue use if any damage is found.

8. Řešení problémů

9. Specifikace

• Model: GP-SW240DC0250-IP44(US) A
• Délka: 66 20 stop (XNUMX XNUMX metrů)
• Počet LED diod: 200
• Světlé barvy: Warm White, Multicolor, Mixed Color
• Zdroj napájení: Corded Electric (24V Low Voltage Plug)
• Způsob ovládání: 21tlačítkový dálkový ovladač
• Speciální vlastnosti: Color Changing, Dimmable (4 levels), Linkable (up to 3 sets), Timer (4H/6H/8H), Memory Function
• Vnitřní/venkovní použití: Uvnitř, venku
• Hodnocení voděodolnosti: IPX7
• Materiál: Měď

10. Záruka a podpora

Joomer products are designed for quality and durability. For warranty information, technical support, or any questions regarding your product, please contact Joomer customer service through the retailer's platform or visit the official Joomer webmísto.

Uschovejte si prosím účtenku jako doklad o koupi pro případ reklamace.