1. Úvod
Thank you for choosing the TROTEC TWP 11000 ES Submersible Wastewater Pump. This powerful 1100-watt pump is designed for efficient water extraction and transfer, capable of pumping up to 20,000 liters per hour. Its robust, encapsulated, and waterproof stainless steel housing ensures durability and reliable performance. This manual provides essential information for the safe and effective setup, operation, and maintenance of your pump. Please read these instructions carefully before first use and keep them for future reference.
Obrázek 1.1: The TROTEC TWP 11000 ES Submersible Wastewater Pump. This image shows the complete pump unit with its yellow and black housing, stainless steel motor casing, float switch, power cable, discharge nozzle, and the included nylon rope.
2. Bezpečnostní pokyny
Always observe the following safety precautions to prevent injury and damage to the pump.
- Elektrická bezpečnost: Ensure the power supply matches the pump's specifications (100 Volts). Always connect the pump to a properly grounded outlet. Do not operate the pump with a damaged power cord or plug. Never immerse the plug or power cord in water.
- Teplota vody: The pump is designed for water temperatures up to a maximum of 35°C (95°F). Do not use it for pumping hot water or corrosive liquids.
- Typ kapaliny: This pump is intended for pumping wastewater, clear water, and slightly contaminated water. Do not use it for flammable, explosive, or aggressive liquids, or for food products.
- Hloubka ponoření: Do not exceed the maximum immersion depth of 7 meters.
- Děti a domácí mazlíčci: Keep children and pets away from the operating pump and the area where water is being pumped.
- Údržba: Always disconnect the pump from the power supply before performing any maintenance, cleaning, or adjustments.
- Instalace: Ensure the pump is placed on a stable, level surface. Do not suspend the pump by its power cable or discharge hose. Use the provided nylon rope for lowering and retrieving the pump.
- Plovákový spínač: Ensure the float switch can move freely and is not obstructed.
3. Konec produktuview
3.1. Součásti
The TROTEC TWP 11000 ES pump consists of the following main components:
- Tělo čerpadla: The main housing, typically yellow and black.
- Motor Casing: Stainless steel, encapsulated and waterproof.
- Plovákový spínač: Automatically controls pump operation based on water level.
- Napájecí kabel: For connecting to the electrical supply.
- Discharge Nozzle: For connecting the discharge hose.
- Zacházet s: Robust handle for carrying and attaching the lowering rope.
- Nylon Rope (10m): Supplied for safe lowering and retrieval of the pump.
Obrázek 3.1: Detailní view of the TROTEC TWP 11000 ES pump, highlighting its robust construction and key components like the float switch and discharge outlet.
4. Nastavení
4.1. Connecting the Discharge Hose
The pump's discharge nozzle is designed for flexible hose connections.
- Attach a suitable discharge hose to the pump's outlet. The pump supports hose diameters of 25 mm (1 inch) and 38 mm (1½ inches).
- Ensure the connection is secure to prevent leaks during operation.
- The discharge nozzle can be rotated 360 degrees to direct the water flow as needed.
Obrázek 4.1: Diagram illustrating the compatible hose connection sizes (25/38 mm and 1"/1½") for the pump's discharge outlet.
Obrázek 4.2: The pump's discharge nozzle can be rotated 360 degrees for flexible hose positioning.
4.2. Umístění čerpadla
- Place the pump on a firm, level surface in the water to be pumped. Ensure the intake openings at the bottom of the pump are not obstructed.
- For deeper applications like wells or tanks, use the supplied 10-meter nylon rope. Attach the rope securely to the pump's handle and carefully lower the pump into the water. Do not use the power cable or discharge hose for lowering.
- Ensure the float switch has sufficient space to move freely up and down, as its movement controls the pump's automatic operation.
Obrázek 4.3: Illustration of the float switch's movement, which dictates the pump's automatic on/off cycles based on water level.
5. Provoz
5.1. Automatic Operation (Float Switch)
The TROTEC TWP 11000 ES pump features an automatic float switch for hands-free operation.
- Once the pump is connected to the power supply and immersed in water, the float switch will activate the pump when the water level reaches approximately 50 mm.
- The pump will continue to operate until the water level drops to approximately 40 mm, at which point the float switch will turn the pump off.
- Ensure the float switch is positioned so it can move freely and is not restricted by walls or other objects.
Obrázek 5.1: Illustration showing the approximate water levels for pump activation (50 mm) and deactivation (40 mm residual water level).
5.2. Manual Operation (Continuous Pumping)
For continuous pumping, the float switch can be secured in an upward position.
- To engage manual operation, lift the float switch and secure it in the "on" position using the clip on the pump body.
- In manual mode, the pump will operate continuously, regardless of the water level, until it is manually unplugged or the float switch is released.
- Pozor: Do not allow the pump to run dry in manual mode, as this can cause damage. Monitor the water level closely.
6. Údržba
Pravidelná údržba zajišťuje dlouhou životnost a optimální výkon vašeho čerpadla.
- Čištění: After each use, especially when pumping dirty water, rinse the pump thoroughly with clean water. Remove any debris that may have accumulated around the intake openings or the impeller.
- Plovákový spínač: Periodically check the float switch for free movement and ensure it is not clogged with dirt or debris.
- Skladování: Pokud čerpadlo delší dobu nepoužíváte, vyčistěte ho, vypusťte veškerou vodu a uložte ho na suchém místě chráněném před mrazem.
- Cable and Plug: Regularly inspect the power cable and plug for any signs of damage. Do not use the pump if the cable or plug is damaged.
7. Řešení problémů
Pokud se s čerpadlem setkáte s problémy, podívejte se na následující běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Čerpadlo se nespustí. | Žádné napájení. Float switch not activated. Oběžné kolo zablokované. | Zkontrolujte připojení napájení a jistič. Ensure water level is above 50 mm or secure float switch for manual operation. Disconnect power, then check and clear impeller. |
| Čerpadlo běží, ale voda se nevypouští. | Discharge hose blocked or kinked. Příliš nízká hladina vody. Air lock in the pump. | Check and clear the discharge hose. Ensure pump is fully submerged and water level is sufficient. Lift and lower the pump slightly to release trapped air. |
| Čerpadlo se neočekávaně zastaví. | Water level dropped below 40 mm (automatic mode). Aktivována ochrana proti přehřátí. Přerušení napájení. | This is normal in automatic mode. If in manual mode, check water level. Allow pump to cool down. Check for blockages or excessive load. Zkontrolujte napájení. |
| Reduced pumping performance. | Partial blockage of intake or impeller. Hose diameter too small or too long. Excessive head lift. | Clean intake and impeller. Use appropriate hose diameter (25/38 mm). Ensure discharge height is within specifications. |
Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte prosím zákaznickou podporu společnosti TROTEC.
8. Specifikace
Detailed technical specifications for the TROTEC TWP 11000 ES Submersible Wastewater Pump:
| Funkce | Hodnota |
|---|---|
| Číslo modelu | TWP 11000 ES |
| Značka | TROTEC |
| Zdroj napájení | Elektrický kabel |
| svtage | 100 voltů |
| Výkon (Wattage) | 1100 wattů |
| Maximální průtok | 20,000 litru za hodinu |
| Maximální zdvih hlavy | 354.33 palců (přibližně 9 metrů) |
| Maximum Immersion Depth | 7 metrů |
| Minimum Start Water Level | 50 mm |
| Minimum Stop Water Level (Residual) | 40 mm |
| Maximální teplota vody | 35 °C |
| Materiál | Nerez |
| Barva | Černá, žlutá |
| Rozměry produktu (D x Š x V) | 22.5 x 22.5 x 37 cm |
| Hmotnost položky | 500 gramů |
| Zahrnuté komponenty | Pump, 10m Nylon Rope |
| Compatible Hose Diameters | 25 mm (1"), 38 mm (1½") |
| Mezinárodní kód zboží (EAN) | 04052138101155 |
Obrázek 8.1: Technical diagram of the TROTEC TWP 11000 ES, showing key dimensions, operating parameters like max immersion depth, max water temperature, and flow rate.
9. Záruka a podpora
TROTEC provides a warranty for its products in accordance with local regulations.
- Dostupnost náhradních dílů: Spare parts for this model are available for 2 years.
- Záruční nároky: For warranty claims or technical support, please contact your retailer or the official TROTEC customer service. Keep your proof of purchase handy.
- Online podpora: Visit the official TROTEC website for further information, FAQs, and contact details.