Uživatelská příručka k bezdrátovému mokro-suchému vysavači Tineco FLOOR ONE S5

1. Úvod

The Tineco FLOOR ONE S5 is an intelligent cordless wet dry vacuum cleaner and floor washer designed for efficient cleaning of hard floors. It simultaneously vacuums and mops, tackling both wet and dry messes, including stubborn and sticky dirt, and pet hair. Equipped with iLoop Smart Sensor technology, the device automatically adjusts cleaning parameters for optimal performance.

2. Co je zahrnuto

Carefully unpack your Tineco FLOOR ONE S5 and ensure all components are present:

• 1 x Tineco FLOOR ONE S5 Device
• 2 x Brush Rollers
• 2 x HEPA filtry
• 1 x 3-in-1 Cleaning Tool
• 1 x Dry Filter and Holder
• 1 x Odor Neutralizing and Cleaning Solution
• 1 x Držák příslušenství
• 1 x napájecí zdroj
• 1 x 21.6V 4000mAh Battery (pre-installed or separate)
• 1 x Uživatelská příručka

Image: Tineco FLOOR ONE S5 with its various accessories, including brush rollers, filters, and cleaning solution.

3. Nastavení

1. Shromáždění: Insert the handle into the main body of the vacuum cleaner until it clicks into place.
2. Nabíjení: Place the device on its charging base. Ensure the power supply is connected to the base and a wall outlet. The LED display will indicate charging status. Fully charge the device before first use (approximately 1 hour).
3. Naplňte nádrž na čistou vodu: Remove the clean water tank from the device. Fill it with clean water up to the MAX line. For optimal cleaning, add a capful of the provided Tineco cleaning solution. Do not use other cleaning solutions as they may damage the device or void the warranty.
4. Instalace nádrže na čistou vodu: Reinsert the clean water tank securely into the device.

Image: A user placing the Tineco FLOOR ONE S5 onto its charging base for initial setup.

4. Návod k obsluze

4.1 Zapnutí a režimy

• Press the power button to turn on the device. It will start in AUTO mode by default.
• AUTO režim: The iLoop Smart Sensor detects dirt levels and automatically adjusts suction power, water flow, and brush roller speed. This mode is suitable for everyday cleaning and optimizes battery life (up to 35 minutes).
• Režim MAX: For stubborn stains and heavy messes, switch to MAX mode for intensive cleaning power. Note that battery runtime will be reduced in this mode (up to 28 minutes).

4.2 Proces čištění

The Tineco FLOOR ONE S5 is designed for hard floors. It vacuums and mops simultaneously, leaving floors dry and streak-free in minutes.

• Push the device forward to clean. The brush roller will agitate and scrub the floor.
• The iLoop sensor on the LED display will change color (e.g., red for detected dirt, blue for clean) to indicate the cleanliness of the area.
• The unique brush roller design allows for effective edge cleaning, reaching close to baseboards and into corners.

Image: The smart display of the Tineco FLOOR ONE S5 indicating dirt detection and cleaning status with color changes.

Image: A demonstration of the Tineco FLOOR ONE S5's brush roller cleaning a wooden floor, showing the three stages of cleaning action.

Image: The Tineco FLOOR ONE S5 effectively cleaning different types of dirt, such as liquid spills and dry debris, across various hard floor surfaces.

5. Údržba

Pravidelná údržba zajišťuje optimální výkon a dlouhou životnost vašeho Tineco FLOOR ONE S5.

5.1 Cyklus samočištění

Po každém použití se doporučuje spustit samočisticí cyklus:

1. Ujistěte se, že nádrž na čistou vodu má dostatek vody.
2. Place the device on its charging base.
3. Press the self-clean button (usually indicated by a water drop icon). The device will automatically clean the brush roller and internal tubes.
4. After the self-cleaning cycle, the spin-drying function will remove excess water from the roller, helping to prevent odors.

5.2 Ruční čištění součástí

• Nádrž na špinavou vodu: Empty and rinse the dirty water tank after each use. Remove any solid debris from the filter inside the tank.
• Kartáčový váleček: While the self-cleaning cycle is effective, occasionally remove the brush roller for a deeper clean. Use the provided cleaning tool to remove tangled hair or debris.
• HEPA filtr: Rinse the HEPA filter with water and allow it to air dry completely before reinserting. It is recommended to replace the HEPA filter every 3 months.
• Kryt kartáčového válce: Remove and rinse the brush roller cover to clear any accumulated dirt.

Image: A visual guide detailing the maintenance steps for the Tineco FLOOR ONE S5, including cleaning the filter, emptying the dirty water tank, and washing components.

Image: The Tineco FLOOR ONE S5 undergoing its automatic self-cleaning cycle, showing the brush roller being cleaned and spin-dried.

6. Řešení problémů

7. Specifikace

Obrázek: Overview of the Tineco FLOOR ONE S5's key specifications, including runtime, noise level, and tank capacities.

8. Záruka a podpora

Tineco is committed to providing excellent customer service and product support.

• Záruka: Your Tineco FLOOR ONE S5 comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
• Opravy: Tineco offers a global repair service, aiming to complete repairs within 5 business days.
• Zákaznická podpora: For any inquiries or issues, Tineco provides a quick response within 24 hours. You can contact customer support through the official Tineco webstránky nebo vašeho prodejce.
• Online zdroje: Navštivte oficiální stránky Tineco website for FAQs, video tutorials, and additional support resources.

Image: Details about Tineco's premium service, including 2-year warranty, 24-hour response, and global repair service.