DIGITNOW High Fidelity Belt Drive Turntable

1. Úvod a konecview

The DIGITNOW B10A High Fidelity Belt Drive Turntable is designed to provide a high-quality vinyl listening experience with modern conveniences. It features fully manual operation, precise pitch control, and anti-skate adjustment for optimal playback. The turntable also includes a magnetic cartridge, a stable aluminum platter, and the capability to convert vinyl records to digital MP3 files via a USB connection to a computer. Its built-in switchable phono pre-amplifier allows for versatile connection to various audio systems.

2. Bezpečnostní informace

• Read all instructions carefully before operating the turntable.
• Keep the unit away from water or moisture to prevent electric shock.
• Do not expose the unit to direct sunlight, heat sources, or extreme temperatures.
• Zajistěte dostatečné větrání; neblokujte žádné větrací otvory.
• Používejte pouze nástavce/příslušenství specifikované výrobcem.
• Odpojte jednotku během bouřky s blesky nebo pokud se delší dobu nepoužívá.
• Veškeré opravy svěřte kvalifikovanému servisnímu personálu.

3. Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:

• DIGITNOW B10A Turntable Unit
• Removable Protective Dust Cover
• Aluminum Turntable Platter
• Plstěná podložka
• Napájecí kabel
• USB propojovací kabel
• RCA audio kabely
• Návod k použití
• Adaptér 45 RPM
• Protiváha
• Audacity Software Disc (for digital conversion)
• Turntable Cartridge (Audio Technica AT-3600L)

Obrázek 3.1: Všechny komponenty obsažené v balení.

4. Nastavení

4.1 Sestavení otočného talíře

1. Carefully remove the turntable unit and all components from the packaging.
2. Umístěte otočný talíř na stabilní a rovný povrch.
3. Place the aluminum platter onto the turntable spindle. Ensure it sits securely.

Figure 4.1: Turntable platter and drive belt.
4. Locate the drive belt (usually pre-installed on the platter or included separately). Carefully stretch the belt around the motor pulley located beneath the platter.


Figure 4.2: Attaching the drive belt.

5. Umístěte plstěnou podložku na horní část talíře.
6. Attach the headshell with the pre-installed Audio Technica AT-3600L cartridge to the S-shaped tonearm. Secure it by tightening the locking ring.


Figure 4.3: Cartridge connection.

7. Install the counterweight onto the rear of the tonearm. Adjust it to balance the tonearm horizontally. Once balanced, set the tracking force according to the cartridge specifications (typically 1.5-2.5g for AT-3600L).

Figure 4.4: Counterweight adjustment.
8. Adjust the anti-skate control to prevent the tonearm from drifting inward or outward during playback.


Figure 4.5: Tonearm and Anti-Skate Control.

9. Attach the removable dust cover to the hinges at the back of the turntable.

4.2 Připojení k audiosystému

1. Connect the power cord to the turntable and then to a power outlet.
2. Connect the RCA audio cables from the turntable's L LINE OUT R ports to your ampzesilovač nebo aktivní reproduktory.
3. Set the "LINE/PHONO" switch on the back of the turntable according to your setup:
• ČÁRA: Toto nastavení použijte, pokud se připojujete k amplifier or speakers that do not have a dedicated "PHONO" input, as the turntable's internal pre-amplifier will boost the signal.
• FONO: Toto nastavení použijte, pokud se připojujete k amplifier or receiver with a dedicated "PHONO" input, as it will bypass the turntable's internal pre-ampživější.


Figure 4.6: Rear connections and Line/Phono switch.

4. For digital conversion, connect the USB cable from the turntable's USB TO PC port to your computer.

5. Návod k obsluze

5.1 Základní přehrávání

1. Ensure the turntable is properly connected to power and your audio system.
2. Switch the power switch on the back of the unit to the "ON" position.
3. Place a vinyl record on the felt mat on the platter. If playing a 45 RPM single, place the 45 RPM adapter on the spindle first.
4. Sejměte z přenosky chránič stylusu.
5. Select the appropriate playback speed (33 or 45 RPM) using the speed selector buttons on the turntable.

Figure 5.1: Speed selector and strobe dots.
6. Press the "PLAY/STOP" button to start the platter rotation.


Figure 5.2: Play/Stop button.

7. Carefully lift the tonearm using the cueing lever and position the stylus over the desired track on the record.
8. Lower the cueing lever to gently drop the stylus onto the record. Playback will begin.
9. To stop playback, raise the tonearm using the cueing lever, return it to the arm rest, and press the "PLAY/STOP" button to stop the platter. Secure the tonearm with its lock.

5.2 Ovládání výšky tónu

The turntable features variable pitch control, allowing you to fine-tune the playback speed. Use the pitch slider to increase or decrease the speed. The strobe dots around the platter's edge will appear stationary when the speed is accurate for the selected RPM.

Figure 5.3: Pitch Control Slider.

Figure 5.4: Strobe dots for speed verification.

5.3 Vinyl to Digital Conversion (MP3)

To convert your vinyl records to digital MP3 format, connect the turntable to your computer via the USB port. Use the included Audacity software (or other compatible audio recording software) to record the audio. Follow the software's instructions for recording and saving your digital files.

6. Údržba

6.1 Čištění jednotky

• Před čištěním vždy odpojte jednotku ze zásuvky.
• Use a soft, dry cloth to wipe the exterior surfaces of the turntable.
• For the dust cover, use a soft cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals that may scratch or damage the plastic.

6.2 Péče o stylus

• Stylus pravidelně jemně čistěte měkkým kartáčkem určeným k čištění stylusu, a to kartáčováním zezadu dopředu.
• Avoid touching the stylus with your fingers, as oils and dirt can degrade sound quality and damage the stylus.
• Replace the stylus when you notice a degradation in sound quality or after approximately 300-500 hours of playback, depending on usage.

7. Řešení problémů

Pokud máte s gramofonem problémy, prostudujte si následující běžné problémy a jejich řešení:

• Bez napájení: Ensure the power cord is securely connected to both the turntable and a working power outlet. Check the power switch on the back of the unit.
• Žádný zvuk nebo slabý zvuk:
  • Verify that the RCA cables are correctly connected to your audio system's inputs.
  • Check the "LINE/PHONO" switch setting. If your amplifier has a PHONO input, set the switch to PHONO. If not, set it to LINE.
  • Ujistěte se, že vaše amplifier/speakers are powered on and the volume is turned up.
  • Confirm the stylus is properly seated in the cartridge and not damaged.
• Zkreslený zvuk:
  • Check the tracking force and anti-skate settings. Incorrect settings can cause distortion.
  • Clean the stylus. A dirty stylus can cause distorted sound.
  • Ujistěte se, že je záznam čistý a bez prachu nebo nečistot.
• Kolísání rychlosti:
  • Verify the drive belt is properly installed and not stretched or worn.
  • Use the pitch control to fine-tune the speed until the strobe dots appear stationary.
• Bzučivý hluk:
  • Ujistěte se, že jsou všechna připojení zvuku bezpečná.
  • If using the PHONO output, ensure your amplifier has a proper ground connection if available (this model does not have a dedicated ground wire, so ensure other components are grounded).
  • Move the turntable away from other electronic devices that may cause interference.

8. Specifikace

9. Záruka a podpora

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official DIGITNOW webUschovejte si doklad o koupi pro případné reklamace.