SoloGood FOXEER Micro Cat 4 FPV Camera Instruction Manual

1. Úvod

The SoloGood FOXEER Micro Cat 4 is a high-performance FPV camera engineered for demanding drone racing and night flight applications. It features a 1/3" CMOS sensor, 1200TVL resolution, and exceptional low-light capabilities, ensuring clear and detailed imaging even in challenging lighting conditions. This manual provides essential information for the proper setup, operation, and maintenance of your Micro Cat 4 FPV camera.

2. Konec produktuview

The FOXEER Micro Cat 4 camera is designed for superior visual performance with minimal noise and latency. Key features include:

• Noční vidění hvězdného světla: Equipped with a 1/3" CMOS sensor for excellent low-light performance, enabling night flight.
• Displej s vysokým rozlišením: 1200TVL resolution with 100dB WDR (Wide Dynamic Range) for balanced footage.
• Flexibilní poměr stran: Supports switchable 4:3 and 16:9 aspect ratios.
• PAL/NTSC Switchable: Compatible with both video standards.
• Large Aperture Lens: Features an F1.4 large aperture lens to maximize light intake.
• Ultra-Low Illumination: Operates effectively down to 0.00001LUX.

Figure 2.1: SoloGood FOXEER Micro Cat 4 FPV Camera, front view.

Obrázek 2.2: Detail view of the F1.4 large aperture lens, designed to enhance light capture for brighter and more detailed images.

3. Specifikace

Figure 3.1: Diagram illustrating the switchable 4:3 and 16:9 aspect ratios and their corresponding Fields of View (FOV).

4. Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

• 1 x Foxeer Micro Cat 4 Camera
• 1 x OSD Board
• 1 x 2-pin OSD Cable
• 4 x závorové šrouby
• 4 x Gasket Rings
• 1 x Servo Cable

Figure 4.1: Visual representation of the package contents and detailed dimensions of the Micro Cat 4 camera.

5. Nastavení

5.1 Schéma zapojení

Connect the camera to your flight controller or video transmitter according to the following pinout. Ensure correct polarity to prevent damage.

Obrázek 5.1: Zadní view of the Micro Cat 4 camera showing the VCC, GND, VID, and OSD pin connections. VCC is for power input, GND is ground, VID is video output, and OSD is for On-Screen Display control.

• VCC: Power Input (typically 5-25V, refer to your flight controller/VTX specifications for compatible voltagE).
• GND: Zemní spojení.
• VID: Video Output to your video transmitter or recording device.
• OSD: Connect to the OSD board for menu access and settings adjustment.

5.2 Montáž

The Micro Cat 4 camera is compact, with dimensions of approximately 19mm x 19mm x 19mm. Use the provided bracket screws and gasket rings for secure mounting on your drone frame. Refer to Figure 4.1 for detailed dimensions.

6. Návod k obsluze

6.1 Zapnutí

Once correctly wired, power on your drone. The camera will automatically activate and begin transmitting video. Ensure your FPV goggles or monitor are set to the correct video standard (PAL/NTSC) and frequency.

6.2 Navigace v nabídce OSD

The included OSD board allows you to access and adjust camera settings. Connect the OSD board to the camera's OSD pin. Use the buttons on the OSD board to navigate the menu and change parameters such as:

• Nastavení expozice: Adjust brightness, contrast, and gain.
• Vyvážení bílé: Select automatic or manual white balance modes.
• Vylepšení obrázku: Configure WDR, noise reduction, and sharpness.
• Formát videa: Switch between PAL and NTSC.
• Poměr stran: Toggle between 4:3 and 16:9.

Před ukončením nabídky OSD uložte nastavení.

6.3 Výkon za slabého osvětlení

The Micro Cat 4 excels in low-light conditions due to its starlight sensor and large aperture lens. For optimal night flight performance, ensure your OSD settings are configured to enhance low-light visibility, such as appropriate gain and WDR settings. The camera automatically adjusts to extremely low illumination levels (0.00001LUX).

7. Údržba

• Čištění objektivu: Gently clean the lens with a soft, lint-free cloth and a specialized lens cleaning solution. Avoid abrasive materials that could scratch the lens.
• Skladování: Store the camera in a dry, dust-free environment when not in use. Protect it from extreme temperatures.
• Podmínky prostředí: The camera is not water-resistant. Avoid exposure to moisture, rain, or high humidity. Operate within the specified temperature range (up to 50°C).

8. Řešení problémů

• Žádný obraz/Černá obrazovka:
  • Check all wiring connections, especially VCC, GND, and VID. Ensure correct polarity.
  • Ověřte napájecí zdroj objtage is within the camera's operating range.
  • Confirm your FPV goggles/monitor are on the correct channel and video standard (PAL/NTSC).
• Poor Image Quality/Flickering:
  • Check for interference from other electronic components.
  • Ujistěte se, že objektiv je čistý a bez šmouh nebo prachu.
  • Adjust OSD settings for brightness, contrast, and WDR.
  • Verify the camera is securely mounted to minimize vibrations.
• Nezobrazuje se nabídka OSD:
  • Ensure the OSD board is correctly connected to the camera's OSD pin.
  • Check the OSD board cable for damage.
• Přehřátí kamery:
  • Ensure adequate airflow around the camera, especially during bench testing.
  • Ověřte vstupní objemtage is not exceeding the maximum specified limit.
  • Pokud přehřívání přetrvává, přestaňte zařízení používat a kontaktujte podporu.

9. Záruka a podpora

For warranty information, please refer to the terms and conditions provided at the point of purchase or contact your retailer. For technical support, product inquiries, or assistance with troubleshooting beyond this manual, please contact SoloGood customer service or visit the official FOXEER webmísto.