Hörmann 4511585

Hormann 4511585 HSE 4 BS Hand Transmitter

Návod k použití

Zavedení

This manual provides essential information for the proper setup, operation, and maintenance of your Hormann 4511585 HSE 4 BS Hand Transmitter. This device is designed for controlling Hormann garage door operators and gate operators. Please read these instructions carefully before using the hand transmitter.

Hormann HSE 4 BS Hand Transmitter, front view

Obrázek: Přední strana view of the Hormann HSE 4 BS Hand Transmitter, featuring its glossy carbon finish and four control buttons.

Bezpečnostní pokyny

  • Keep the hand transmitter away from children to prevent accidents.
  • Operate the hand transmitter only when the garage door or gate is within your line of sight and clear of obstructions.
  • Do not expose the hand transmitter to extreme temperatures, moisture, or direct sunlight.
  • This device is intended for use in dry environments only.

Nastavení

1. Instalace baterie

The Hormann HSE 4 BS Hand Transmitter comes with a pre-installed CR2032 lithium button cell battery. If replacement is needed, follow these steps:

  1. Locate the battery compartment on the back of the hand transmitter.
  2. Opatrně otevřete kryt přihrádky pomocí malého šroubováku nebo mince.
  3. Vyjměte starou baterii CR2032.
  4. Insert a new 3V CR2032 lithium button cell battery with the positive (+) side facing up.
  5. Bezpečně zavřete kryt bateriového prostoru.
Hormann HSE 4 BS Hand Transmitter with battery compartment visible

Obrázek: Zadní view of the hand transmitter, showing the battery compartment and key ring attachment point.

2. Programování ručního vysílače

The HSE 4 BS hand transmitter supports both BiSecur radio and 868 MHz fixed code systems. The programming procedure depends on your specific Hormann operator model. Refer to your garage door or gate operator's instruction manual for detailed programming steps. Generally, the process involves:

  • Activating the programming mode on your operator.
  • Pressing a button on the new hand transmitter to transmit the signal.
  • Confirming the successful pairing on the operator.

For BiSecur systems, the hand transmitter can copy codes from an existing BiSecur hand transmitter. For 868 MHz fixed code systems, it can also be programmed directly to the operator.

Operating the Hand Transmitter

The Hormann HSE 4 BS Hand Transmitter features four buttons, allowing control of up to four different functions or operators.

  1. Aktivace: Press the desired button firmly to send a signal to your garage door or gate operator.
  2. Rozsah: Ensure you are within the operational range of your operator. Obstacles can reduce the effective range.
  3. Více funkcí: Each button can be programmed independently to control different doors, gates, or lighting systems compatible with your Hormann operator.
Hormann HSE 4 BS Hand Transmitter showing buttons

Obrázek: Detail view of the hand transmitter's control buttons, indicating its multi-function capability.

Údržba

  • Čištění: Clean the hand transmitter with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Výměna baterie: Replace the CR2032 battery when the transmission range decreases significantly or the indicator light (if present) no longer illuminates. Refer to the "Battery Installation" section for instructions.
  • Skladování: Store the hand transmitter in a dry place, away from extreme temperatures and direct sunlight.

Odstraňování problémů

Problém Možná příčina Řešení
Hand transmitter does not operate the door/gate.
  • Baterie je slabá nebo vybitá.
  • Hand transmitter is out of range.
  • Hand transmitter is not programmed correctly.
  • Obstruction blocking the signal.
  • Vyměňte baterii (CR2032).
  • Move closer to the operator.
  • Reprogram the hand transmitter (refer to operator manual).
  • Remove any obstructions between the hand transmitter and operator.
Snížený provozní dosah.
  • Slabá baterie.
  • Interference from other radio devices.
  • Vyměňte baterii.
  • Try operating from a different location or angle.

Specifikace

  • Model: 4511585 (HSE 4 BS)
  • Značka: Hormann
  • Frekvence: 868 MHz (BiSecur and fixed code compatible)
  • Počet tlačítek: 4
  • Typ baterie: 3V Lithium Button Cell, CR2032 (1 included)
  • Rozměry (D x Š x V): 70 x 28 x 14 mm (přibližně 2.76 x 1.10 x 0.55 palce)
  • Hmotnost: Approximately 56 grams (including battery)
  • Materiál: Glossy plastic with chrome-plated die-cast zinc caps
  • Třída ochrany: Pouze pro suché místnosti
  • Rozsah teplot: 0 ° C až +50 ° C (32 ° F až 122 ° F)
  • Kompatibilní zařízení: Hormann garage door operators, Hormann gate operators
  • Technologie připojení: Rádiová frekvence
  • Země původu: Německo

Záruka a podpora

For warranty information and technical support, please refer to the documentation provided with your Hormann garage door or gate operator, or visit the official Hormann webwebu. Uschovejte si účtenku jako doklad o koupi.

Výrobce: Hormann

Webmísto: www.hormann.com (Please note: This is a generic link. Refer to your regional Hormann webweb pro konkrétní podporu.)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.