FEELWORLD FT6 FR6 5.5 Inch Wireless Video Transmission Monitor

1. Úvod

Thank you for choosing the FEELWORLD FT6 FR6 5.5 Inch Wireless Video Transmission Monitor. This device integrates a high-quality HD monitor with a wireless video transmission system, offering enhanced mobility and flexibility for professional video production. The FT6 acts as the transmitter, and the FR6 functions as the receiver, providing a reliable solution for monitoring on set. This manual will guide you through the setup, operation, and maintenance of your new monitor system.

2. Bezpečnostní informace

• Nevystavujte zařízení dešti ani vlhkosti, abyste předešli riziku požáru nebo úrazu elektrickým proudem.
• Avoid disassembling the unit. Refer servicing to qualified personnel only.
• Use only the specified power adapter (12V 1.5A) or compatible F970 batteries.
• Udržujte zařízení mimo dosah silných magnetických polí.
• Zajistěte správné větrání, aby nedošlo k přehřátí.

3. Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:

• 1x FEELWORLD FT6 Wireless Monitor (Transmitter)
• 1x FEELWORLD FR6 Wireless Monitor (Receiver)
• 1x kabel micro HDMI
• 2x slunečník
• 1x Hot Shoe Mount
• 4x Transmission Antenna
• 1x kabel typu C na USB
• 1x rukojeť
• 2x šrouby
• 1x Šňůrka
• 1x 1/4 C-ring Screw
• 1x Small Carrying Case
• 1x Uživatelská příručka

4. Konec produktuview

The FEELWORLD FT6 FR6 system consists of two 5.5-inch monitors, one configured as a transmitter (FT6) and the other as a receiver (FR6). Both units feature a 1920x1080 Full HD IPS touchscreen display, offering a 1000:1 contrast ratio and Rec.709 color gamut for accurate image representation. The system supports 4K HDMI input and loop-out, making it compatible with a wide range of DSLR and mirrorless cameras.

Mezi klíčové vlastnosti patří:

• Bezdrátový přenos: Up to 800ft (250m) range with ultra-low latency of 0.07s.
• Displej s vysokým rozlišením: 5.5-inch 1920x1080 IPS screen with 500nit brightness.
• Ovládání dotykovou obrazovkou: Intuitive menu navigation and function adjustments.
• Podpora 3D LUT: Load up to 50 custom 3D LUTs via Type-C to USB.
• Monitorování HDR: Supports HDR signals for enhanced clarity and detail.
• Dual Battery Plates: Accommodates two F970 batteries for extended operation and hot-swapping.
• Profesionální monitorovací nástroje: Includes Waveform, Vectorscope, Histogram, Focus Assist, False Color, Nine Grid, Exposure, Zoom, Image Flip, Embedded Audio, and Anamorphic Mode.

5. Nastavení

5.1. Připojení antén

Screw the four provided transmission antennas onto the designated ports on both the FT6 (transmitter) and FR6 (receiver) units. Ensure they are securely fastened for optimal signal transmission.

5.2. Napájení zařízení

The FT6 FR6 monitors can be powered by either a DC 12V power adapter (not included) or two F970 series batteries (not included). The monitors feature dual battery plates, allowing for continuous power by hot-swapping batteries.

To switch between batteries during operation, double-tap the battery icon displayed on the upper right corner of the monitor screen. The system will switch to the other battery after approximately 3 seconds.

5.3. Připojení k fotoaparátu

Use the provided Micro HDMI cable to connect your camera's HDMI output to the HDMI IN port on the FT6 (transmitter). If you need to loop out the signal to another monitor, connect an HDMI cable from the HDMI OUT port on the FR6 (receiver) to your external monitor.

5.4. Sunshade Installation

Attach the sunshade to the monitor to improve screen visibility in bright outdoor conditions. The sunshade clips onto the monitor's frame.

6. Návod k obsluze

6.1. Zapnutí/vypnutí

Press and hold the power button located on the side of the monitor to turn the device on or off.

6.2. Touchscreen Controls

The FT6 FR6 monitors feature an intuitive touchscreen interface. Double-tap the screen to open the main menu. Swipe gestures allow for quick adjustments:

• Swipe up/down on the right side: Adjust volume.
• Swipe up/down on the left side: Adjust backlight.
• Swipe left/right: Access shortcut menus or switch between functions.

6.3. Wireless Pairing and Channel Selection

The FT6 and FR6 units are designed for automatic pairing. If manual pairing is required, use the WPS pairing function. There are 11 signal channels available for selection to ensure stable transmission.

For optimal performance, select a channel with minimal interference. The system provides real and stable pictures, crucial for professional monitoring.

6.4. Pokročilé monitorovací funkce

The monitor includes a suite of professional tools to assist with exposure, focus, and framing:

• 3D LUT: Load custom Look-Up Tables to preview tvůj footage with specific color grades.
• Waveform/Vectorscope/Histogram: Analyze video signals for accurate exposure and color balance.
• Focus Assist: Highlights in-focus areas for precise focusing.
• Falešná barva: Displays exposure levels using a color overlay.
• Devítidílná mřížka: Pomáhá s kompozicí pomocí mřížky s pravidlem třetin.

6.5. Video Playback and Monitoring

The system supports various video formats including 1080P60, 1080P50, 1080i60, 1080i50, and 4K HDMI formats (4096x2160p 24Hz, 3840x2160p 30/29.97/25/24/23.98Hz). The low latency of 0.07s ensures real-time monitoring.

7. Údržba

• Čištění: K čištění obrazovky a těla monitoru používejte měkký, suchý hadřík. V případě odolných šmouh použijte lehceamp cloth with a mild cleaning solution can be used, ensuring no liquid enters the device.
• Skladování: When not in use, store the monitor in its carrying case in a cool, dry place away from direct sunlight and extreme temperatures.
• Péče o baterie: If using F970 batteries, ensure they are charged regularly and stored properly to prolong their lifespan.

8. Řešení problémů

• Nelze zapnout monitor:
  Ensure you are using the standard 12V 1.5A power adapter or fully charged F970 batteries.
• Hluk během nahrávání:
  Long press the "<" button to decrease the volume to near zero. This can help avoid noise during recording. Long pressing ">" increases the volume.
• Monitor zobrazuje „žádný signál“:
  
  1. Zkuste použít jiný kabel HDMI.
  2. Connect the monitor's HDMI input to a computer to verify if the monitor receives a signal.
  3. Check your camera's output signal settings and confirm that the monitor supports the camera's output signal format.
• Focus peak displays information on the monitor:
  Turn off the "HDMI Information Display" option under the "HDMI Settings" tab in the menu system. This will prevent additional information from being shown when focus peak is active.

9. Specifikace

10. Záruka a podpora

FEELWORLD provides a 1-year warranty for the FT6 FR6 Wireless Video Transmission Monitor. For any technical assistance or support inquiries, please contact FEELWORLD's official customer service. US local after-sales support is available to address your needs.