GRAIGAR Smart Sensor AR8210 Dissolved Oxygen Meter User Manual

1. Úvod

The GRAIGAR Smart Sensor AR8210 is a portable digital dissolved oxygen meter designed for precise measurement of dissolved oxygen and temperature in various water systems. Its ergonomic design ensures ease of use with simple key operations and a comfortable grip. This device is suitable for applications in water sources, aquariums, hydroponics, spas, and swimming pools.

Obsah balení:

• 1 x Dissolved Oxygen Meter (AR8210)
• 1 x Dissolved Oxygen Probe with Cable
• 1 x úložný sáček
• 1 x Uživatelská příručka
• 4 x LR44 Button Batteries (pre-installed or included separately)

Image 1.1: Contents of the AR8210 package, including the meter, probe, and retail box.

Image 1.2: The included black storage bag for the AR8210 Dissolved Oxygen Meter.

2. Vlastnosti produktu

• Rapid measurements of Dissolved Oxygen and Temperature (within 30 seconds).
• Wide measuring range: 0.00-20.00 mg/L for Dissolved Oxygen.
• Large and clear LCD with backlight for easy readability in various lighting conditions.
• High accuracy with automatic temperature compensation.
• Durable plastic shell construction.
• Funkce uchování dat.
• Kalibrační funkce.
• Temperature unit conversion (Celsius/Fahrenheit).

Image 2.1: The AR8210 meter with its LCD display and control buttons (SET, CAL, Power, HOLD, Up/Down arrows).

Obrázek 2.2: Zadní strana view of the AR8210 meter, displaying specifications and serial number.

3. Nastavení

3.1 Instalace baterie

The AR8210 meter operates on 4 x LR44 button batteries. These are typically included with the device. To install or replace batteries:

1. Unscrew the battery compartment cover, usually located at the top or bottom of the meter.
2. Insert the LR44 button batteries, ensuring correct polarity (+/-).
3. Bezpečně zavřete kryt prostoru pro baterie.

3.2 Připojení sondy

Connect the dissolved oxygen probe to the meter by aligning the connector and gently pushing it in until it clicks or is firmly seated. Ensure the connection is secure to prevent water ingress and ensure accurate readings.

Image 3.1: The AR8210 meter connected to its dissolved oxygen probe via a cable.

4. Návod k obsluze

4.1 Zapnutí/vypnutí

Stiskněte tlačítko Moc tlačítko () to turn the meter on. Press and hold the Moc opětovným tlačítkem jej vypnete.

4.2 Postup měření

1. Ensure the probe is clean and properly connected.
2. Immerse the probe into the water sample to be tested. Ensure the sensor part of the probe is fully submerged.
3. Allow approximately 30 seconds for the reading to stabilize on the LCD display.
4. Read the dissolved oxygen concentration (mg/L) and temperature (°C/°F) from the display.

4.3 Kalibrace

Regular calibration ensures measurement accuracy. Refer to the specific calibration solution requirements and procedure outlined in the full user manual. Typically, calibration involves:

1. Prepare the appropriate calibration solution (e.g., zero oxygen solution or saturated oxygen solution).
2. Stiskněte tlačítko CAL tlačítko () to enter calibration mode.
3. Postupujte podle pokynů na obrazovce a dokončete proces kalibrace.

4.4 Funkce Data Hold

Stiskněte tlačítko DRŽET tlačítko () to freeze the current reading on the display. Press it again to release the hold and resume live measurements.

4.5 Funkce podsvícení

Stiskněte tlačítko SOUBOR tlačítko () to toggle the display backlight on or off, improving visibility in low-light conditions.

4.6 Převod jednotek teploty

The meter supports temperature display in both Celsius (°C) and Fahrenheit (°F). Use the arrow buttons or a combination with the SET button (refer to the full manual for exact key press) to switch between units.

5. Údržba

5.1 Čištění sondy

After each use, rinse the probe thoroughly with distilled water to remove any residue. Do not use abrasive materials or harsh chemicals, as this can damage the sensor membrane.

5.2 Skladování

When not in use, store the meter and probe in the provided storage bag in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the probe's protective cap is in place to keep the sensor moist (if applicable to the probe type) or protected.

5.3 Výměna baterie

Replace batteries when the low battery indicator appears on the display or if the meter fails to power on. Refer to section 3.1 for battery installation instructions.

6. Řešení problémů

• Měřič se nezapne: Zkontrolujte instalaci baterií a ujistěte se, že nejsou vybité. V případě potřeby je vyměňte.
• Nepřesné údaje: Ensure the probe is clean and properly calibrated. Recalibrate if readings are consistently off. Check for damage to the probe membrane.
• Displej je slabý nebo bliká: Vyměňte baterie.
• No reading: Ensure the probe is fully submerged and properly connected to the meter.

7. Specifikace

8. Záruka a podpora

For warranty information, technical support, or service inquiries, please refer to the contact details provided with your purchase documentation or visit the official GRAIGAR webwebu. Uschovejte si účtenku jako doklad o koupi.

For additional resources and support, you may visit the following link: http://weixin.qq.com/r/TDmzt4bEwU69KcLUb2zI