Zavedení
This manual provides comprehensive instructions for the SHARP Digital Alarm with AccuSet. This automatic smart clock is designed for ease of use, eliminating the need for manual time adjustments. Its clear, bright LED display and intuitive controls make it an ideal timekeeping solution for any room.
The SHARP Digital Alarm Clock seamlessly integrates into your bedroom decor.
Vlastnosti produktu
- AccuSet Automatic Time Set: Pre-programmed time for immediate use.
- Quick Daylight Savings Time (DST) Adjustment: Simple switch for time changes.
- High/Low Dimmer Control: Adjustable display brightness for comfort.
- Back up Battery: Pre-installed CR2032 battery maintains time settings during power outages.
- Výběr časového pásma: Easily select your local time zone.
Nadview of the SHARP Digital Alarm Clock's primary features.
Nastavení
- Rozbalte hodiny: Opatrně vyjměte hodiny z obalu.
- Vyberte časové pásmo: Locate the time zone switch on the bottom of the clock. Select your appropriate time zone (EST, CST, MST, PST) before plugging in the unit.
- Připojit: Connect the power cord to an approved electrical outlet. The clock will automatically set to the correct time based on your time zone selection.
- Nastavení letního času (DST): If applicable, slide the DST switch on the bottom of the clock to 'ON' to add one hour (+1 hr.) for Daylight Saving Time, or 'OFF' to subtract one hour (-1 hr.) for Standard Time.
The main unit of the SHARP Digital Alarm Clock, ready for setup.
Návod k obsluze
Nastavení alarmu
The alarm function is controlled by buttons located on the top of the clock.
- Nastavit čas alarmu: Press and hold the 'ALARM' button. While holding, press the 'HOUR' button to adjust the alarm hour and the 'MINUTE' button to adjust the alarm minute. Release the 'ALARM' button when finished.
- Aktivovat/deaktivovat alarm: Press the 'ALARM ON/OFF' button to toggle the alarm function. An 'ALARM' indicator light on the front display will illuminate when the alarm is active.
- Funkce odložení: When the alarm sounds, press the large 'SNOOZE' button on top to temporarily silence the alarm for a short period. The alarm will sound again after the snooze period ends.
Ovládání stmívače
Adjust the brightness of the LED display to your preference using the 'DIMMER HI/LO' switch located on the top left of the clock.
- Slide the switch to 'HI' for a brighter display.
- Slide the switch to 'LO' for a dimmer display, suitable for nighttime viewIng.
Detailní view of the top panel controls for time and alarm settings.
The clock's display with the dimmer function activated, showing reduced brightness.
Zálohování baterie
The clock includes a pre-installed CR2032 button cell battery. This battery is used to maintain the time settings in the event of a power interruption, ensuring that you do not need to reset the time when power is restored. The battery is located in a screw-secured compartment at the bottom of the clock and is designed to last for several years.
Chcete-li vyměnit baterii:
- Unplug the clock from the electrical outlet.
- Vyhledejte přihrádku na baterie na spodní straně hodin.
- Unscrew the cover and remove the old CR2032 battery.
- Vložte novou baterii CR2032 a dbejte na správnou polaritu.
- Replace the cover and screw it securely.
- Plug the clock back into the electrical outlet.
Specifikace
| Funkce | Popis |
|---|---|
| Značka | OSTRÝ |
| Model | B08TG8W2QD |
| Barva | Midnight Black-white Led |
| Typ zobrazení | Digitální |
| Speciální funkce | Automatic Set |
| Rozměry produktu | 5.5 cm Š x 2.6 cm V |
| Zdroj napájení | Elektrický kabel, na baterie |
| Záložní baterie | CR2032 (pre-installed) |
| Hmotnost položky | 10.2 unce (0.29 kilogramů) |
| Materiál rámu | Plast |
Physical dimensions of the alarm clock.
Odstraňování problémů
- Time Not Setting Automatically: Ensure the time zone switch on the bottom is correctly set for your region. Verify the clock is securely plugged into a working electrical outlet. The internal CR2032 battery is for backup and does not power the main display.
- Příliš jasný/tmavý displej: Use the 'DIMMER HI/LO' switch on the top of the clock to adjust the display brightness to your preference.
- Alarm nezní: Check that the 'ALARM ON/OFF' button has been pressed and the 'ALARM' indicator light on the front display is illuminated. Ensure the alarm time is correctly set.
- Time Reset After Power Outage: If the time resets after a power outage, the internal CR2032 backup battery may be depleted or improperly installed. Refer to the 'Battery Backup' section for replacement instructions.
Údržba
To ensure the longevity and optimal performance of your SHARP Digital Alarm Clock, follow these simple maintenance guidelines:
- Čištění: Wipe the clock's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish.
- Výměna baterie: Replace the CR2032 backup battery every few years or if the clock fails to retain time during a power interruption. Refer to the 'Battery Backup' section for detailed instructions.
- Umístění: Umístěte hodiny na stabilní, rovný povrch mimo dosah přímého slunečního záření, nadměrného tepla nebo vlhkosti.
Záruka a podpora
For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official SHARP webUschovejte si účtenku, protože doklad o koupi může být vyžadován pro reklamaci.