ONE Light 67384/AN/W Anthracite PLAFO LED Luminaire User Manual

Zavedení

Děkuji za nákupasing the ONE Light 67384/AN/W Anthracite PLAFO LED Luminaire. This manual provides essential information for the safe installation, operation, and maintenance of your new LED light fixture. Please read these instructions carefully before installation and retain them for future reference.

Bezpečnostní pokyny

• Elektrická bezpečnost: Installation must be performed by a qualified electrician in accordance with all local and national electrical codes. Ensure the main power supply is switched off at the circuit breaker before commencing any installation or maintenance work.
• svtage: This luminaire is designed for operation with a 100-240V AC power supply. Verify your supply voltage splňuje tento požadavek.
• Montáž: Ensure the mounting surface is structurally sound and capable of supporting the weight of the luminaire.
• Stupeň krytí IP54: This product is rated IP54, indicating protection against dust ingress and splashing water from any direction. It is suitable for both indoor and outdoor use, but not for submersion.
• Zdroj světla LED: LED lamps are built-in and cannot be changed. Do not attempt to open or modify the LED module.
• Teplo: The luminaire may become warm during operation. Avoid touching the surface directly after extended use.

Obsah balení

Před instalací zkontrolujte, zda jsou všechny komponenty přítomny a nepoškozené:

• ONE Light 67384/AN/W LED Luminaire (1 unit)
• Montážní materiál (šrouby, hmoždinky)
• Návod k použití (tento dokument)

Nastavení a instalace

Pro bezpečnou a správnou instalaci postupujte podle těchto kroků:

1. Příprava: Switch off the main power supply at the circuit breaker. Ensure the installation area is clean and dry.
2. Místo montáže: Select a suitable wall or ceiling location for the luminaire. Consider the desired light distribution and accessibility for future maintenance.
3. Označení: Use the luminaire's mounting bracket as a template to mark the drilling points on the surface.
4. Vrtání: Drill holes at the marked points using an appropriate drill bit for your wall material. Insert wall plugs if necessary.
5. Zapojení: Connect the electrical wires from your power supply to the luminaire's terminal block. Ensure correct polarity (Live, Neutral, Earth) as indicated on the luminaire. Secure all connections tightly.
6. Mounting the Luminaire: Secure the luminaire to the mounting surface using the provided screws. Ensure it is firmly attached and stable.
7. Závěrečná kontrola: Double-check all connections and ensure the luminaire is securely mounted. Restore power at the circuit breaker.

Image: The ONE Light 67384/AN/W Anthracite PLAFO LED Luminaire, showcasing its sleek, round design suitable for modern indoor and outdoor environments.

Image: Technical drawing illustrating the dimensions of the luminaire: 340mm diameter and 50mm height.

Návod k obsluze

The ONE Light 67384/AN/W luminaire is designed for simple operation.

• Zapnutí/vypnutí: Control the luminaire using a standard wall switch (push button controller type). Flip the switch to turn the light on or off.
• Světelný zdroj: This luminaire features a built-in LED light source that provides warm white (WW) illumination. The LEDs are non-removable and designed for long-term use.

Údržba

Pravidelná údržba zajistí optimální výkon a dlouhou životnost vašeho svítidla.

• Čištění: Before cleaning, ensure the power supply to the luminaire is switched off. Use a soft, damp cloth to wipe the exterior surface. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
• Lamp Nahrazení: LED lamps in this luminaire are built-in and cannot be replaced. If the LED light source fails, the entire luminaire must be replaced by a qualified professional.
• Inspekce: Periodically inspect the luminaire for any signs of damage, loose connections, or wear. If any issues are found, switch off the power and consult a qualified electrician.

Image: EU Energy Label for the luminaire, indicating it contains built-in LED lamps that cannot be changed, in compliance with regulation 874/2012.

Odstraňování problémů

If you encounter issues with your luminaire, refer to the following common problems and solutions:

• Světlo se nerozsvítí:
  • Zkontrolujte, zda je zapnutý hlavní zdroj napájení.
  • Ověřte, zda je nástěnný vypínač v poloze „ZAPNUTO“.
  • Zkontrolujte elektrické spoje, zda nejsou uvolněné nebo poškozené (před kontrolou se ujistěte, že je vypnuté napájení).
  • Zkontrolujte jistič, zda není vyřízená pojistka.
• Blikání světla:
  • Ujistěte se, že všechna elektrická připojení jsou bezpečná.
  • Ověřte napájení objtage is stable and within the specified range (100-240V).
• Snížený jas:
  • Clean the luminaire's surface to remove any dust or dirt accumulation.
  • LED diody mají dlouhou životnost, ale v průběhu let může docházet k postupné degradaci.

If the problem persists after attempting these solutions, contact a qualified electrician or the retailer for assistance. Do not attempt to repair the luminaire yourself.

Specifikace

Záruka a podpora

For warranty information, please refer to the terms and conditions provided by your retailer at the time of purchase. Keep your proof of purchase for any warranty claims.

If you require technical support or have questions not covered in this manual, please contact the retailer where you purchased the product or visit the official ONE Light webstránky pro kontaktní údaje.