GardePro E6

Návod k obsluze kamery GardePro E6

Model: E6 | Brand: GardePro

Zavedení

The GardePro E6 Trail Camera is designed for capturing high-quality photos and videos of wildlife or for property security. It features WiFi and Bluetooth connectivity, 24MP still image resolution, 1296P video recording, and no-glow night vision. This manual provides detailed instructions for setting up and operating your camera.

Obsah balení

  • 1 x GardePro E6 Trail Camera
  • 1 x Anténa
  • 1 x montážní popruh
  • 1 x USB kabel
  • 1 x Návod k použití
  • Note: SD card and 8 AA batteries are not included and must be purchased separately.

Nastavení

1. Připravte kameru

Before initial use, gently remove any protective films from the camera lens, PIR sensors, and screen.

GardePro E6 Trail Camera with protective films being removed

Image: A hand removing protective films from the camera's front panel, highlighting the lens and sensors.

2. Nainstalujte anténu

Screw the provided antenna into the mounting base located on the top of the camera. Ensure it is tightened securely.

Video: Demonstrates screwing the antenna into the camera's mounting base.

3. Vložte SD kartu

Open the camera's side latch to reveal the control panel. Locate the SD card slot and insert a standard SD card (up to 256GB) properly until it clicks into place. For first-time use, it is recommended to format the SD card through the camera's menu settings to ensure compatibility and optimal performance.

4. Nainstalujte baterie

Open the battery compartment. Insert 8 AA batteries, ensuring correct polarity (+/-). Close the battery compartment securely. It is recommended to use non-rechargeable alkaline or lithium batteries for best performance and longevity.

Video: Shows the process of inserting the SD card and 8 AA batteries into the camera.

5. Zapnutí a počáteční konfigurace

Slide the power switch to the "ON" position. The camera display will light up. Navigate to the "MENU" settings to set the date, time, and format the SD card if it's the first use. Ensure the WiFi setting is enabled (e.g., CH1, CH2, etc.) for app connectivity.

Operace

Režimy snímání

The E6 camera supports various capture modes:

  • Režim fotografie: Captures still images. The camera features 24MP resolution with advanced image sensor technology for clear photos.
  • Režim videa: Records video clips in 1296P resolution with clear audio.
  • Režim foto + video: Při spuštění pořídí statický snímek a následně videoklip.
  • Časosběrný režim: Zachycuje snímky v nastavených intervalech, což je užitečné pro sledování dlouhodobých událostí.
GardePro E6 Trail Camera capturing a squirrel eating, demonstrating HD video with audio.

Image: A squirrel eating, captured by the GardePro E6, showcasing HD video quality and audio recording.

Detekce pohybu a noční vidění

The camera is equipped with motion-activated sensors (PIR) to trigger recording. It features 36 high-performance 940nm IR LEDs for no-glow night vision, providing clear black and white images and videos up to 75 feet in low-light conditions.

GardePro E6 Trail Camera demonstrating 75ft no-glow night vision capturing deer in a forest.

Image: Night vision footage from the GardePro E6 showing deer in a forest, highlighting the 75ft range.

Informační překryv

Recordings can include a customizable overlay displaying time, date, and temperature. This feature can be enabled or disabled in the camera settings.

Connectivity (Wi-Fi & Bluetooth)

The GardePro E6 utilizes Bluetooth for initial discovery and Wi-Fi for direct connection to your smartphone via the "GardePro Mobile" app. This allows for remote control, live view, and media management.

1. Stáhněte si aplikaci

Download the "GardePro Mobile" app from your device's app store (App Store for iOS or Google Play for Android).

Video: Tutorial on downloading and connecting to the "GardePro Mobile" app.

2. Připojte se ke kameře

Ensure the camera's power switch is in the "ON" position and WiFi is enabled in the camera settings. Open the "GardePro Mobile" app, grant necessary permissions, and select "Wi-Fi Camera" to add your device. The app will connect via Bluetooth first, then establish a Wi-Fi connection. Maintain a limited distance (approx. 33ft/10m for Bluetooth, 45ft/14m for Wi-Fi in open areas) for stable connection.

GardePro E6 Trail Camera mounted on a tree, showing WiFi connection and app control on a smartphone.

Image: The GardePro E6 camera mounted on a tree, with a smartphone displaying the app interface, indicating WiFi connection and app control.

3. Remote Control and Media Management

Po připojení můžete aplikaci použít k:

  • View a live feed from the camera to adjust its capturing area.
  • Manually take photos or start video recording.
  • Access the camera's gallery to review and download captured photos and videos to your phone.
  • Adjust various camera settings remotely.

Montáž

The GardePro E6 can be mounted using the included tree strap or a standard 1/4-20 threaded mount on the bottom of the camera. When mounting, consider the placement of the camera to ensure optimal coverage of the desired area. Note that the screen used for aiming is located on the side opposite the mounting point, which may require careful adjustment during installation.

GardePro E6 Trail Camera mounted on a tree with a strap, showing its discreet design.

Image: The GardePro E6 camera discreetly mounted on a tree using its strap, blending into the environment.

Možnosti napájení

  • Vnitřní baterie: Requires 8 AA batteries. Non-rechargeable batteries are recommended.
  • Externí napájení: The camera supports an external 12V DC power supply via a 2.2mm center-positive plug. This is ideal for extended use without frequent battery changes.

Specifikace

FunkceSpecifikace
Efektivní rozlišení24 MP
Efektivní rozlišení videa1296 XNUMX pixelů
Technologie bezdrátové komunikaceBluetooth, WiFi
Úroveň odolnosti proti voděVodotěsný (IP66)
Technologie nízkého osvětleníNight Color (No Glow Infrared)
Pole View110 stupňů
Typ paměti FlashSD, SDHC, SDXC (up to 256GB)
Zdroj napájení8 x AA Batteries (not included), External 12V DC
Rozměry položky D x Š x V4.2 x 2.4 x 5.6 palce

Údržba

  • Čištění: Use a soft, dry cloth to clean the camera lens and sensors. Avoid abrasive materials or harsh chemicals.
  • Výměna baterie: Replace all 8 AA batteries simultaneously. Do not mix old and new batteries or different battery types.
  • Správa SD karet: Regularly check and format the SD card to prevent data corruption and ensure sufficient storage space.
  • Hydroizolace: The camera is IP66 waterproof. Ensure all latches and covers are securely closed to maintain water resistance, especially in wet conditions.

Odstraňování problémů

  • Špatné připojení k Wi-Fi: Ensure your smartphone is within the recommended range (approx. 45ft/14m in open areas) and there are no significant obstructions. Bluetooth is used for initial discovery, then Wi-Fi for data transfer.
  • SD karta nebyla rozpoznána: Ensure the SD card is inserted correctly. Try formatting the SD card through the camera's menu. If the issue persists, try a different compatible SD card (SD, SDHC, SDXC up to 256GB).
  • Krátká výdrž baterie: Ensure you are using fresh, high-quality non-rechargeable AA batteries. Extreme temperatures can affect battery performance. Consider using an external 12V DC power source for prolonged deployment.
  • Difficulty Aiming: The camera's screen is on the side. Use the live view feature in the "GardePro Mobile" app to assist with precise aiming after initial mounting.

Záruka a podpora

For warranty information or technical support, please refer to the official GardePro webwebu nebo kontaktujte zákaznický servis na adrese podpora@zopudt.com.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.