Armor3 Soundtac Universal Gaming Headset Instruction Manual

1. Úvod

The Armor3 Soundtac Universal Gaming Headset provides high-quality audio and clear communication for an immersive gaming experience. Designed for broad compatibility, this headset features a 3.5mm audio jack for connection to various gaming consoles and computers. It includes inline controls for volume adjustment and microphone management.

2. Obsah balení

• Armor3 Soundtac Universal Gaming Headset
• 3.5mm audio kabel (integrovaný)

Image: The Armor3 Soundtac Universal Gaming Headset shown within its retail packaging.

3. Konec produktuview

3.1 Součásti náhlavní soupravy

Obrázek: Generál view of the Armor3 Soundtac Universal Gaming Headset, highlighting its overall design.

Image: The headset with its flexible microphone boom extended, ready for use.

3.2 Vložené ovládací prvky

Obrázek: Podrobný view of the inline control unit, showing the volume dial and the microphone on/off switch.

• Ovládání hlasitosti: A rotary dial located on the inline control unit to adjust audio output level.
• Vypínač mikrofonu: A toggle switch on the inline control unit to mute or unmute the microphone.
• 3.5mm audio jack: The universal connector for audio and microphone input/output.

4. Pokyny k nastavení

4.1 Connecting to Gaming Consoles (Nintendo Switch, PS4, PS5, Xbox Series X/S, Xbox One, Wii U)

1. Locate the 3.5mm audio jack on your gaming console or controller.
2. Insert the 3.5mm audio plug from the headset firmly into the console's or controller's audio jack.
3. Adjust the volume using the inline volume control on the headset.
4. Ensure the microphone switch is in the 'On' position for voice communication.

4.2 Připojení k PC/Mac

For PC/Mac systems that have separate audio output and microphone input jacks, a 3.5mm audio splitter (not included with all models, may be required) is necessary. If your PC/Mac has a single combined 3.5mm audio jack, a splitter is not needed.

1. If your PC/Mac has separate audio and microphone jacks: Connect the headset's 3.5mm plug to a compatible 3.5mm audio splitter (e.g., a Y-splitter with separate headphone and microphone outputs). Then, connect the splitter's headphone output to your PC's audio output jack and the microphone output to your PC's microphone input jack.
2. If your PC/Mac has a single combined 3.5mm audio jack: Insert the headset's 3.5mm audio plug directly into the jack.
3. Access your computer's sound settings to ensure the headset is selected as the default audio output and input device.
4. Adjust the volume using the inline control and ensure the microphone switch is 'On'.

5. Návod k obsluze

5.1 Nastavení hlasitosti

• Rotate the volume dial on the inline control unit to increase or decrease the audio level.
• Further volume adjustments can be made through your connected device's system settings.

5.2 Používání mikrofonu

• To activate the microphone, slide the microphone on/off switch on the inline control unit to the 'On' position.
• To mute the microphone, slide the switch to the 'Off' position.
• Position the flexible microphone boom appropriately for clear voice pickup, typically near your mouth.

6. Údržba

• Čištění: K čištění sluchátek s mikrofonem používejte měkký, suchý hadřík. Nepoužívejte agresivní chemikálie ani abrazivní materiály.
• Skladování: Sluchátka skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
• Péče o kabely: Vyhněte se ostrým ohybům nebo nadměrnému tahání za kabel, abyste předešli jeho poškození.

7. Řešení problémů

8. Specifikace

9. Záruka a podpora

9.1 Informace o záruce

This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official Armor3 webPodrobné záruční podmínky naleznete na webových stránkách. Uschovejte si doklad o koupi pro případ reklamace.

9.2 Zákaznická podpora

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Armor3 customer support. Contact information can typically be found on the product packaging or the official Armor3 webmísto.