MIPRO ACT-5801/ACT-58H Wireless Microphone System User Manual

Zavedení

Thank you for choosing the MIPRO ACT-5801/ACT-58H ISM 5 GHz Wireless Microphone System. This system is designed to provide high-quality, reliable audio transmission for various applications. This manual provides detailed instructions for the setup, operation, and maintenance of your new wireless microphone system. Please read this manual thoroughly before operating the equipment to ensure optimal performance and longevity.

Bezpečnostní informace

• Zdroj napájení: Use only the specified power adapter for the receiver. Ensure the voltage odpovídá místnímu napájení.
• Voda a vlhkost: Do not expose the system to rain, moisture, or any liquids. Avoid using near water sources.
• Teplo: Udržujte systém mimo dosah zdrojů tepla, jako jsou radiátory, topná tělesa, kamna nebo jiná zařízení (včetně amplifikátory), které produkují teplo.
• Větrání: Zajistěte dostatečné větrání přijímače. Neblokujte žádné větrací otvory.
• Čištění: Čistěte pouze suchým hadříkem. Nepoužívejte tekuté čističe nebo aerosolové čističe.
• Servis: Veškerý servis svěřte kvalifikovanému servisnímu personálu. Nepokoušejte se tento výrobek opravovat sami.
• Baterie: Použité baterie zlikvidujte v souladu s místními předpisy. Nevystavujte baterie nadměrnému teplu.

Obsah balení

Zkontrolujte prosím, zda jsou v balení obsaženy všechny následující položky:

• ACT-5801 Digital Receiver (1 unit)
• ACT-58H Handheld Microphone Transmitter (1 unit)
• Power Adapter for Receiver (1 unit)
• Audio Cable (XLR to 1/4" Jack) (1 unit)
• Uživatelská příručka (tento dokument)

Identifikace součásti

ACT-5801 Receiver

The ACT-5801 receiver is a 1/2U single-channel unit. Key components include:

• Přední panel: Power button, LCD display, Channel/Frequency selection buttons, Volume control, ACT sync button.
• Zadní panel: DC power input, Antenna connectors (BNC), Balanced XLR audio output, Unbalanced 1/4" audio output.

ACT-58H Handheld Microphone Transmitter

The ACT-58H handheld transmitter features:

• Hlava mikrofonu: Integrated condenser capsule.
• Tělo: Power switch, Battery compartment, LCD display (for channel/battery status), ACT sync window.

Nastavení

1. Nastavení přijímače

1. Umístění: Position the ACT-5801 receiver in a clear, open area, away from potential interference sources (e.g., Wi-Fi routers, other 5 GHz devices).
2. Připojení antény: Connect the supplied antennas to the BNC connectors on the rear panel of the receiver. Ensure they are securely tightened and positioned vertically for optimal reception.
3. Připojení napájení: Connect the power adapter to the DC input on the receiver's rear panel, then plug the adapter into an AC power outlet.
4. Zvukový výstup: Connect the receiver's audio output (XLR or 1/4" jack) to the input of your mixer, amplifier, or audio interface using the provided audio cable or a suitable alternative.

2. Transmitter Setup (ACT-58H)

1. Instalace baterie: Unscrew the lower part of the ACT-58H handheld microphone to reveal the battery compartment. Insert two fresh AA batteries, observing the correct polarity (+/-). Replace the cover.
2. Zapnutí: Slide the power switch to the "ON" position. The LCD display will illuminate, showing battery status and current channel.

3. Synchronization (ACT Sync)

To establish a wireless connection, the receiver and transmitter must be on the same frequency channel. Use the ACT (Automatic Channel Targeting) sync function for quick setup:

1. Zapnutí přijímače: Turn on the ACT-5801 receiver.
2. Vyberte kanál: On the receiver, use the channel selection buttons to choose a desired operating frequency. The receiver will automatically scan for a clear channel.
3. Příprava vysílače: Turn on the ACT-58H transmitter.
4. Initiate Sync: Press and hold the "ACT" button on the receiver. The receiver's display will show "ACT" or a similar indicator.
5. Align IR Windows: Position the IR sync window of the ACT-58H transmitter (usually near the bottom of the display) directly facing the IR sync window on the receiver's front panel (typically next to the ACT button). Keep them within a few centimeters.
6. Confirm Sync: The transmitter's display will flash and then show the synchronized channel. The receiver's display will also confirm the successful sync.
7. Testovací zvuk: Speak into the microphone and observe the audio level indicators on the receiver and your mixer/amplifier to confirm signal presence.

Provozní

Základní operace

• Zapnutí/vypnutí: Use the dedicated power buttons on both the receiver and transmitter. Always power on the receiver first, then the transmitter. Power off the transmitter first, then the receiver.
• Ovládání hlasitosti: Adjust the output volume of the receiver using the volume knob on its front panel. Fine-tune the overall audio level on your connected mixer or ampživější.
• Sledování: Monitor the receiver's LCD display for signal strength (RF) and audio level (AF) indicators. Ensure stable RF and avoid clipping on AF.
• Technika mikrofonu: Hold the handheld microphone approximately 2-6 inches (5-15 cm) from your mouth for optimal sound quality. Avoid covering the microphone grille with your hand.

Výběr kanálu

If you experience interference, you may need to change the operating channel:

1. On the receiver, press the channel selection buttons to cycle through available frequencies or initiate an auto-scan function (if available).
2. Once a clear channel is selected on the receiver, perform the ACT sync procedure again to match the transmitter to the new frequency.

Údržba

• Čištění: Use a soft, dry cloth to clean the exterior surfaces of both the receiver and transmitter. Do not use abrasive cleaners or solvents.
• Péče o baterie: Remove batteries from the transmitter if it will not be used for an extended period to prevent leakage. Always use high-quality alkaline or rechargeable batteries.
• Skladování: Systém skladujte na chladném a suchém místě, mimo dosah přímého slunečního záření a extrémních teplot.
• Antén: Handle antennas carefully. Avoid bending or stressing them excessively.

Odstraňování problémů

Specifikace

Záruka a podpora

MIPRO products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the warranty card included with your product or visit the official MIPRO webUschovejte si doklad o koupi pro případ reklamace.

For further assistance, please contact your local MIPRO distributor or authorized service center.