MIPRO ACT-5802/ACT-58H2 Digital Wireless Microphone System User Manual

Zavedení

This manual provides detailed instructions for the setup, operation, and maintenance of your MIPRO ACT-5802/ACT-58H2 Digital Wireless Microphone System. This system features a 5 GHz 1/2U dual-channel digital receiver and two ISM 5 GHz digital handheld wireless microphones, designed for reliable and high-quality audio transmission.

Co je v krabici

Po vybalení se prosím ujistěte, že jsou součástí balení všechny následující komponenty:

• 1 x ACT-5802 Dual-Channel Digital Receiver
• 2 x ACT-58H2 Handheld Digital Wireless Microphones
• 1 x napájecí adaptér pro přijímač
• 2 x antény
• 1 x audio kabel
• 1 x Uživatelská příručka

Note: If any items are missing or damaged, please contact your dealer immediately.

Konec produktuview

The MIPRO ACT-5802/ACT-58H2 system provides a robust wireless audio solution. Below is an image of the complete system.

Obrázek 1: MIPRO ACT-5802/ACT-58H2 Digital Wireless Microphone System. This image displays the ACT-5802 dual-channel receiver unit and two ACT-58H2 handheld microphones, illustrating the primary components of the wireless audio system.

Pokyny pro nastavení

1. Receiver Setup (ACT-5802)

1. Umístění: Position the receiver on a stable, flat surface, away from potential sources of interference such as Wi-Fi routers, microwave ovens, or other 5 GHz devices. Ensure adequate ventilation.
2. Připojení antény: Connect the two supplied antennas to the ANTENNA A and ANTENNA B connectors on the rear panel of the receiver. Ensure they are securely tightened.
3. Připojení napájení: Connect the power adapter to the DC IN jack on the rear panel of the receiver, then plug the adapter into an appropriate AC power outlet.
4. Připojení zvukového výstupu: Connect the receiver's audio output (XLR or 1/4" jack) to the input of your mixer, amplifier, or audio recording device using the supplied audio cable.

2. Handheld Microphone Setup (ACT-58H2)

1. Instalace baterie: Unscrew the lower part of the microphone body to reveal the battery compartment. Insert two fresh AA batteries, observing the correct polarity (+/-) as indicated inside the compartment. Screw the lower part back on securely.
2. Zapnutí: Press and hold the power button on the microphone until the display illuminates.
3. Pairing (ACT Sync):
   • On the receiver, select the desired channel (e.g., Channel 1 or Channel 2) using the control buttons.
   • Press the "ACT" button on the receiver. The ACT indicator will flash.
   • Align the microphone's IR window with the receiver's IR window (usually located on the front panel) within 30 cm (1 foot).
   • The microphone will automatically sync with the receiver. Once synced, the receiver's ACT indicator will stop flashing, and the microphone's display will show the matched channel.

Návod k obsluze

1. Zapnutí/vypnutí

• Přijímač: Press the power button on the front panel. The OLED display will illuminate.
• Mikrofon: Press and hold the power button until the display illuminates (on) or turns off (off).

2. Channel Selection and Adjustment

• The ACT-5802 receiver allows for automatic frequency scanning to find clear channels. Refer to the receiver's display and menu buttons for navigation.
• Once a clear channel is selected on the receiver, use the ACT Sync function (as described in Setup) to pair the microphone to the new channel.

3. Ovládání hlasitosti

• Receiver Output Level: Adjust the volume knob on the front panel of the ACT-5802 receiver to control the audio output level sent to your mixer or ampživější.
• Zisk mikrofonu: Some microphones may have internal gain adjustments. Consult the microphone's specific instructions if needed. Generally, start with a moderate gain setting.

4. Zobrazení informací

The OLED display on both the receiver and microphones provides critical information such as channel number, frequency, battery status, and RF/AF signal strength. Monitor these displays during operation for optimal performance.

Údržba

1. Čištění

• Use a soft, dry cloth to clean the exterior surfaces of the receiver and microphones.
• Nepoužívejte tekuté čisticí prostředky, rozpouštědla ani abrazivní materiály, protože by mohly poškodit povrchovou úpravu nebo vnitřní součásti.
• For microphone grilles, gently wipe with a slightly damp hadříkem a před použitím se ujistěte, že je zcela suchý.

2. Péče o baterie

• Always remove batteries from the microphones if they will not be used for an extended period to prevent leakage and damage.
• Replace batteries promptly when the low battery indicator appears on the microphone's display.
• Používejte vysoce kvalitní alkalické nebo dobíjecí baterie typu AA.

3. Skladování

• Store the system in a cool, dry place, away from direct sunlight, extreme temperatures, and high humidity.
• Keep the original packaging for safe transport and storage.

Odstraňování problémů

Specifikace

Záruka a podpora

For warranty information and technical support, please refer to the warranty card included with your product or visit the official MIPRO webUschovejte si účtenku jako doklad o koupi pro případné reklamace.

For further assistance, contact your authorized MIPRO dealer or distributor.