Roca Thermostatic Shower Set (Model A5A9A25C00) User Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Roca Thermostatic Shower Set, Model A5A9A25C00. This shower column, part of the Victoria range, is designed to offer a comfortable and consistent showering experience with its thermostatic control and elegant design. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Bezpečnostní informace

WARNING: Improper installation or use can lead to injury or property damage.

• Installation should be performed by a qualified professional plumber in accordance with local plumbing and building codes.
• Před zahájením jakékoli instalace nebo údržby se ujistěte, že je přívod vody uzavřen.
• Verify that water pressure is within the recommended limits (maximum 10 Bars).
• Do not use corrosive or abrasive cleaning agents, as they can damage the chrome finish.
• Keep children away from the product during installation and ensure they are supervised during use.

3. Obsah balení

Opatrně vybalte krabici a ujistěte se, že jsou přítomny všechny následující komponenty:

• Thermostatic Shower Column (Victoria Plus Single Lever)
• Rain Type Spray Head (20 cm diameter)
• Hand Shower (10 cm diameter)
• Flexible Metal Hose (1.50 m length)
• Height-adjustable Articulated Bracket
• Mounting Hardware (screws, anchors, gaskets)
• Uživatelská příručka (tento dokument)

Obrázek 1: Přesview of the Roca Thermostatic Shower Set, showing the main column, rain shower head, hand shower, and controls.

4. Nastavení a instalace

The Roca Thermostatic Shower Set is designed for wall-mount installation. Professional installation is highly recommended to ensure correct functionality and adherence to safety standards.

4.1 Kontroly před instalací

• Ujistěte se, že je veškerý obsah balení přítomen a nepoškozený.
• Confirm that your water supply lines (hot and cold) are correctly positioned and accessible for connection.
• Verify that the wall surface is suitable for mounting and can support the weight of the shower set.
• Turn off the main water supply to the bathroom before proceeding.

4.2 Montáž a připojení

1. Refer to the dimension diagram (Figure 2) for precise measurements and recommended mounting heights.
2. Mark the drilling points on the wall according to the shower column's mounting brackets.
3. Vyvrtejte otvory a vložte do nich vhodné hmoždinky.
4. Secure the main mixer unit to the wall, ensuring a watertight seal with gaskets.
5. Connect the hot and cold water supply lines to the corresponding inlets on the mixer.
6. Attach the vertical shower column to the mixer unit and secure it with the upper wall bracket.
7. Install the rain type spray head onto the horizontal arm.
8. Connect the flexible metal hose to the hand shower and the mixer unit.
9. Mount the height-adjustable articulated bracket for the hand shower on the vertical column.

Figure 2: Technical drawing showing dimensions (in mm) and recommended installation measurements for the Roca Thermostatic Shower Set. Note the adjustable height ranges for points A and B.

4.3 Po instalaci

• Pomalu zapněte hlavní přívod vody a zkontrolujte všechny spoje, zda nedochází k únikům vody.
• Test the functionality of the thermostatic mixer, rain shower, and hand shower.

5. Návod k obsluze

Your Roca Thermostatic Shower Set features a single lever for flow control and a separate control for temperature adjustment, ensuring a consistent and safe water temperature.

5.1 Regulace průtoku vody

• The single lever on the mixer unit controls the water flow and diverts water between the rain shower head and the hand shower.
• Move the lever to increase or decrease water flow.
• Rotate the lever to switch between the rain shower and the hand shower.

5.2 Regulace teploty

• The thermostatic control knob allows you to set your desired water temperature.
• Rotate the knob to adjust the temperature. A safety stop is typically present at 38°C (100°F) to prevent accidental scalding. Press the override button (if present) to exceed this temperature.
• The thermostatic valve will maintain the set temperature even if there are fluctuations in the hot or cold water supply pressure.

5.3 Hand Shower Adjustment

• The hand shower's height can be adjusted along the vertical column using the articulated bracket.
• Loosen the bracket, slide it to the desired height, and then tighten to secure.

6. Údržba

Regular cleaning and maintenance will ensure the longevity and optimal performance of your Roca Thermostatic Shower Set.

6.1 Čištění chromového povrchu

• Chromované povrchy pravidelně čistěte měkkým hadříkem a jemným mýdlem nebo neabrazivním čisticím prostředkem speciálně určeným pro chromované povrchy.
• Důkladně opláchněte čistou vodou a osušte měkkým hadříkem, abyste zabránili vzniku skvrn od vody.
• Nepoužívejte: Abrasive cleaners, scouring pads, acids, bleach, or cleaners containing alcohol, as these can damage the chrome finish.

6.2 Cleaning Shower Heads

• Periodically clean the nozzles of the rain shower head and hand shower to remove limescale buildup. Many modern shower heads feature flexible silicone nozzles that can be cleaned by gently rubbing them.
• For stubborn limescale, a solution of white vinegar and water can be used. Soak the shower head (if detachable) or apply the solution with a cloth, then rinse thoroughly.

7. Řešení problémů

If you encounter issues with your shower set, refer to the following common problems and solutions:

If you cannot resolve the issue using these steps, please contact a qualified plumber or Roca customer support.

8. Specifikace

9. Záruka a podpora

For warranty information, product registration, or technical support, please refer to the warranty card included with your product or visit the official Roca webUschovejte si doklad o koupi pro případ reklamace.

For further assistance, you may contact Roca customer service directly.