1. Úvod
Thank you for choosing the GTRACING Fabric Gaming Chair. This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your new chair. Please read these instructions carefully before use to ensure proper function and longevity of the product.
This chair is designed with a focus on ergonomic comfort, featuring breathable fabric, a wide range of reclining adjustments, and supportive cushions for an enhanced sitting experience during work, study, or gaming.
Obrázek 1.1: Konecview of the GTRACING Fabric Gaming Chair.
2. Nastavení a montáž
Before beginning assembly, ensure all parts are present and undamaged. It is recommended to assemble the chair on a soft, clean surface to prevent scratches. Tools required for assembly are typically included with the product.
- Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu.
- Sestava základny: Attach the casters to the chair base. Insert the gas lift cylinder into the center hole of the base.
- Sestava sedadla: Secure the mechanism plate to the underside of the seat using the provided screws.
- Backrest Attachment: Připojte opěradlo k sestavě sedáku.
- Instalace loketní opěrky: Attach the armrests to the seat and backrest as per the instructions.
- Konečná montáž: Umístěte sestavené sedadlo a opěradlo na plynový zvedací válec.
- Umístění polštáře: Attach the headrest and lumbar support cushions.
Refer to the detailed diagram in your physical manual for specific screw locations and orientation of parts.
Image 2.1: Components of the GTRACING Fabric Gaming Chair before assembly.
3. Návod k obsluze
Your GTRACING Gaming Chair offers several adjustable features to customize your comfort.
3.1. Funkce polohování
The chair features a 170-degree reclining function. To recline, pull the lever located on the right side of the chair upwards, lean back to your desired angle, and then release the lever to lock the position. The chair's design prioritizes stability, allowing for a secure recline for relaxation or even a short nap.
Image 3.1: Demonstrating the chair's reclining capabilities.
3.2. Retractable Ottoman
For added comfort during breaks, the chair includes a retractable ottoman. Pull the ottoman out from under the seat when needed, and push it back in for storage. It provides stable foot support even when the backrest is fully reclined.
3.3. Nastavení výšky
To adjust the seat height, pull the lever located on the right side (usually below the seat) upwards while applying or releasing weight from the seat. The seat height can be adjusted between approximately 42cm and 50cm.
Image 3.2: Seat height adjustment range.
3.4. Nastavení loketní opěrky
The armrests are height-adjustable, offering approximately 8cm of vertical movement to provide stable support for your elbows and arms. Use the button or lever on the side of the armrest to adjust its height.
3.5. Bederní a hlavová opěrka
The chair comes with an adjustable lumbar support cushion and a 3D headrest. Position these cushions to best support your lower back and neck for optimal ergonomic alignment.
Image 3.3: Ergonomic features and adjustments.
4. Údržba
Proper maintenance will extend the life and appearance of your GTRACING Gaming Chair.
- Čištění látky: The chair's fabric (cotton linen and suede) should be hand-washed only. Use a mild detergent and a soft cloth. Avoid harsh chemicals or abrasive cleaners.
- Bodové čištění: For small spills, blot immediately with a clean, dry cloth. Do not rub.
- Pravidelné utírání prachu: Dust the chair regularly with a soft brush or vacuum cleaner with a brush attachment to prevent dust buildup.
- Zkontrolujte připojení: Pravidelně kontrolujte všechny šrouby a vruty, zda jsou pevně utažené. V případě potřeby je dotáhněte, abyste zachovali stabilitu a zabránili vrzání.
- Vyhněte se přímému slunečnímu záření: Dlouhodobé vystavení přímému slunečnímu záření může způsobit vyblednutí látky.
Image 4.1: Detail of the breathable fabric material.
5. Řešení problémů
Pokud narazíte na jakékoli problémy s vaší židlí, podívejte se na následující běžné problémy a jejich řešení:
- Chair is unstable or wobbly:
Ensure all screws and bolts are securely tightened. Check that the base and casters are properly installed. - Reclining function not working:
Verify that the recline lever is fully engaged or disengaged. Check for any obstructions in the reclining mechanism. - Seat height adjustment not working:
Ensure the gas lift lever is fully pulled up or pushed down. If the issue persists, the gas lift cylinder may need replacement. - Vrzavé zvuky:
Tighten all screws and bolts. Apply a small amount of silicone lubricant to moving parts if necessary, avoiding contact with fabric. - Kolečka se neotáčejí hladce:
Check casters for trapped debris (hair, dust). Clean them thoroughly.
If these solutions do not resolve the issue, please contact GTRACING customer support for further assistance.
6. Specifikace
| Funkce | Detail |
|---|---|
| Materiál | Cotton Linen (90%) + Suede (10%) |
| Rozměry židle (Š x H x V) | 67.31 cm x 57.15 cm x 120.65 cm ~ 132.08 cm |
| Tělesná hmotnost | Přibl. 24.18 kg |
| Maximální nosnost | 136 kg |
| Materiál rámu | Legovaná ocel |
| Úhel sklonu | Až 170 stupňů |
| Nastavení loketní opěrky | 8 cm height adjustment |
| Nastavení výšky sedadla | Přibližně 42 cm ~ 50 cm |
| Barva | Šedá |
| Velikost balení (D x Š x V) | 84 cm x 65 cm x 29 cm |
| Hmotnost balení | 21.34 kg |
Note: All dimensions and weights are approximate and may vary slightly.
Image 6.1: Detailed dimensions of the GTRACING Fabric Gaming Chair.
7. Záruka a podpora
GTRACING is committed to providing high-quality products. For any warranty claims, technical support, or inquiries regarding your GTRACING Fabric Gaming Chair, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase for warranty purposes.
Contact information can typically be found on the product packaging or the official GTRACING webmísto.