SONICAKE Sonic Wood Acoustic Multi-Effects Pedal Instruction Manual

Zavedení

The SONICAKE Sonic Wood is a versatile multi-effects pedal designed specifically for acoustic guitar players. It integrates four essential effects: a Preamp, Chorus, Delay, and Reverb, offering a comprehensive solution for stage performances and studio recordings. This manual provides detailed instructions for setup, operation, and maintenance of your Sonic Wood pedal.

Klíčové vlastnosti

• One-Stop Gig Solution for Acoustic Instruments Players with Main Effects needed
• Analog Preamp with 2-Band EQ recreates a Classic Acoustic Guitar Amplifier, provide a warm, natural sound
• High Quality Chorus, Delay, Reverb Effects for Different Playing Scenarios
• Tap Tempo and Tail On/Off function for Delicate Control
• XLR Output for directly connecting to PA, Mixer or Audio Interface.

Nastavení

Follow these steps to set up your SONICAKE Sonic Wood pedal:

1. Připojení napájení: Connect the included 9V DC power adapter (center negative, 500mA) to the "DC 9V" input jack on the pedal. Ensure the power source is stable.
   

   Image: The Sonic Wood pedal connected to its power adapter, showing the DC 9V input.
2. Vstup přístroje: Connect your acoustic guitar to the "IN" 1/4-inch input jack on the right side of the pedal.
   

   Image: An acoustic guitar cable plugged into the input jack of the Sonic Wood pedal.

3. Output Connection (1/4-inch): Connect the "OUT" 1/4-inch jack to your acoustic amplifier or another pedal in your signal chain.
4. XLR Output Connection: For direct connection to a PA system, mixer, or audio interface, use the "XLR OUT" balanced output on the left side of the pedal.
   

   Obrázek: Detailní záběr view of the XLR output jack on the Sonic Wood pedal.

Návod k obsluze

The Sonic Wood pedal features four main effects, each with dedicated controls and footswitches.

1. Předamp Sekce

The analog preamp recreates the warm, natural sound of a classic acoustic guitar amplifier. It includes a 2-band EQ for tone shaping.

• VOL: Upravuje celkovou výstupní hlasitost předzesilovačeamp.
• BAS: Řídí nízkofrekvenční odezvu.
• TREB: Řídí vysokofrekvenční odezvu.

Press the rightmost footswitch to engage or bypass the Preamp účinek.

Image: Close-up of the Preamp section with Volume, Bass, and Treble knobs.

2. Chorus Section

The high-quality Chorus effect adds richness and depth to your acoustic tone.

• ÚROVEŇ: Adjusts the mix level of the chorus effect.
• HLOUBKA: Controls the intensity of the chorus modulation.
• HODNOTIT: Adjusts the speed of the chorus modulation.

Press the second footswitch from the right to engage or bypass the Chorus effect.

Klepněte na Tempo: Hold down the Chorus footswitch for 2 seconds to enter Tap Tempo mode. Tap the footswitch multiple times to set the desired modulation rate. Hold again to exit.

Video: Demonstration of the SONICAKE Sonic Wood pedal's various effects, including the Chorus with Tap Tempo function.

3. Delay Section

The analog-voiced Delay effect provides organic repeats for various playing scenarios.

• SMĚS: Adjusts the mix level of the delayed signal.
• OPAKOVAT: Controls the number of repeats (feedback).
• ČAS: Adjusts the delay time between repeats.

Press the second footswitch from the left to engage or bypass the Delay effect.

Klepněte na Tempo: Hold down the Delay footswitch for 2 seconds to enter Tap Tempo mode. Tap the footswitch multiple times to set the desired delay time. Hold again to exit.

4. Reverb Section

The Reverb effect adds spaciousness and ambiance to your sound. It is designed to be easy to control yet powerful.

• SMĚS: Adjusts the mix level of the reverb effect.

Press the leftmost footswitch to engage or bypass the Reverb effect.

Tail On/Off: Hold down the Reverb footswitch for 2 seconds to toggle the Tail function. When Tail is ON, the reverb trails naturally even after bypassing the effect, creating a smooth transition.

Video: Detailed demonstration of the Sonic Wood pedal's features, including the Reverb effect and its Tail function.

Údržba

To ensure the longevity and optimal performance of your SONICAKE Sonic Wood pedal, follow these maintenance guidelines:

• Udržujte pedál čistý otíráním měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Pedál skladujte v suchém prostředí, mimo dosah extrémních teplot a vlhkosti.
• Zabraňte pádu pedálu nebo jeho vystavování silným nárazům, mohlo by dojít k poškození vnitřních součástí.
• Always use the specified 9V DC (center negative) power adapter to prevent damage.

Odstraňování problémů

If you encounter issues with your Sonic Wood pedal, try the following solutions:

• Žádný zvuk:
  • Ensure all cables (instrument, output, power) are securely connected.
  • Verify the power adapter is correctly plugged in and providing power.
  • Check if your guitar's volume is turned up and your amplifier is on and set correctly.
  • Bypass the pedal to check if the issue is with the pedal or other equipment.
• Nežádoucí šum/hučení:
  • Ensure you are using the correct power adapter (9V DC, center negative).
  • Try a different power outlet or a power conditioner.
  • Check for faulty cables and replace if necessary.
  • Zajistěte správné uzemnění vašeho zařízení.
• Effects Not Engaging:
  • Press the footswitch firmly to ensure it engages.
  • Check if the pedal is receiving power (LEDs should light up).

Specifikace

Záruka a podpora

For warranty information and technical support, please refer to the official SONICAKE webwebu nebo se obraťte přímo na jejich zákaznický servis. Pro rozšířené krytí mohou být k dispozici také plány ochrany.

• Dvouletý ochranný plán: K dispozici k zakoupení.
• Dvouletý ochranný plán: K dispozici k zakoupení.
• Kompletní ochrana: Měsíční tarif pokrývající vybrané minulé i budoucí nákupy.