Onforu BDB100D-3
Onforu 100W Dusk to Dawn Outdoor LED Flood Light Instruction Manual
Model: BDB100D-3
1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of your Onforu 100W Dusk to Dawn Outdoor LED Flood Light. Please read this manual thoroughly before installation and use, and retain it for future reference. This flood light is designed for outdoor use, featuring a photocell sensor for automatic operation and adjustable heads for broad illumination.
Image 1.1: Onforu 100W Dusk to Dawn Outdoor LED Flood Light installed on a house, providing bright illumination.
2. Bezpečnostní informace
VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení pojistkou nebo jističem.
- Před instalací nebo údržbou se ujistěte, že je napájení vypnuto.
- Instalaci by měl provést kvalifikovaný elektrikář v souladu s místními elektrotechnickými předpisy.
- Neinstalujte na povrchy, které nejsou konstrukčně pevné.
- Nedívejte se přímo do LED světelného zdroje, když je rozsvícený.
- Udržujte hořlavé materiály v dostatečné vzdálenosti od svítidla.
- This product is not intended for use with motion sensors.
- This product is not solar powered.
3. Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- 1 x Onforu 100W Dusk to Dawn Outdoor LED Flood Light
- 1 x montážní držák
- 1x Gumové těsnění
- 1 x Black Cap for Photocell (for switch-controlled mode)
- Montážní šrouby a matice z drátu
- Návod k použití
Image 3.1: The flood light fixture and included installation hardware.
4. Vlastnosti produktu
- Vysoká svítivost: 100W LED flood light producing up to 9000 lumens with 154 LEDs.
- Nastavitelné hlavy: Tři lamp heads can be adjusted independently to customize lighting angles and provide a wide light range (up to 120° beam angle).
- Senzor od soumraku do úsvitu: Integrated photocell sensor automatically turns the light on at night (10-20 Lux) and off during the day (30-60 Lux).
- Switch-Controlled Mode: Option to cover the photocell sensor with the included black cap to enable manual control via a wall switch.
- IP65 voděodolný: Ensures reliable operation in various weather conditions, including rain, sleet, and snow.
- Efektivní chlazení: Constructed with high-quality aluminum housing and a fin-type heat sink design for effective heat dissipation, prolonging LED lifespan.
- Úspora energie: Advanced high-efficiency LEDs reduce electricity consumption by over 80%.
Image 4.1: The three adjustable lamp heads and the light perception sensor.
Image 4.2: The light demonstrating its IP65 waterproof capability during rainfall.
5. Nastavení a instalace
This product requires hardwired installation. Ensure power is disconnected before proceeding.
- Příprava zapojení: Ensure the electrical box is properly installed and the power is off at the circuit breaker.
- Montážní držák: Attach the mounting bracket to the electrical box using the provided screws. Ensure the rubber gasket is placed between the bracket and the mounting surface for a watertight seal.
- Připojení kabeláže: Connect the light fixture's wires to your household wiring:
- Black wire (Live) to the Live wire.
- White wire (Neutral) to the Neutral wire.
- Green wire (Ground) to the Ground wire.
- Připevněte přípravek: Align the light fixture with the mounting bracket and secure it with the central screw. Ensure the fixture is flush against the mounting surface.
- Upravte hlavy: Loosen the screws on the adjustable heads to position them to your desired lighting angles. Tighten the screws to secure the heads.
- Obnovit napájení: Zapněte proud na jističi.
Image 5.1: Wiring diagram for installation.
Obrázek 5.2: Vizuální průvodce procesem instalace.
Video 5.1: Official product video demonstrating the installation process and key features of the Onforu 100W Dusk to Dawn LED Flood Light.
6. Návod k obsluze
The Onforu 100W Dusk to Dawn Outdoor LED Flood Light offers two operating modes:
6.1. Dusk to Dawn Mode (Default)
In this mode, the integrated photocell sensor detects ambient light levels. The light will automatically turn on when the ambient light drops to 10-20 Lux (at dusk) and turn off when the ambient light increases to 30-60 Lux (at dawn).
Image 6.1: The light operating in automatic dusk to dawn mode.
6.2. Switch-Controlled Mode
To operate the light manually via a wall switch, cover the photocell sensor with the provided black cap. This will prevent the sensor from detecting ambient light, allowing the light to be controlled solely by the external switch.
Image 6.2: Using the black cap to enable switch-controlled mode.
7. Údržba
- Čištění: Periodically clean the light fixture and photocell sensor with a soft, damp cloth to ensure optimal performance. Do not use abrasive cleaners or solvents.
- Inspekce: Regularly inspect the wiring and mounting for any signs of damage or loosening.
- Výměna LED: The LEDs are integrated and not user-replaceable.
8. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se v noci nerozsvítí. | 1. Napájení je vypnuto. 2. Photocell sensor is obstructed or faulty. 3. Problém s elektroinstalací. | 1. Check circuit breaker and wall switch. 2. Ensure photocell is clean and unobstructed. Remove black cap if installed. 3. Verify wiring connections (consult a qualified electrician). |
| Světlo zůstává svítit během dne. | 1. Photocell sensor is covered or in a dark location. 2. Light from another source is hitting the sensor. 3. Photocell sensor is faulty. | 1. Ensure photocell is exposed to sufficient daylight. Remove black cap if installed. 2. Relocate the light or shield the sensor from other light sources. 3. Kontaktujte zákaznickou podporu. |
| Světlo bliká. | 1. Insufficient light reaching the photocell (borderline lux level). 2. Uvolněné kabelové spojení. | 1. Use the included black cap to cover the photocell for switch-controlled mode, or ensure the photocell is in a location with clear light/dark distinction. 2. Check and secure all wiring connections. |
9. Specifikace
| Funkce | Detail |
|---|---|
| Značka | Onforu |
| Číslo modelu | BDB100D-3 |
| Wattage | 100 wattů |
| Jas | 9000 XNUMX lumenů |
| Teplota barev | 6500 Kelvinů (denní bílá) |
| Světelný zdroj | LED |
| Počet světelných zdrojů | 3 (Nastavitelné hlavy) |
| Hodnocení IP | IP65 (vodotěsný) |
| Zdroj napájení | Elektrický kabel (110 V) |
| Kontrolní metoda | Photocell (Dusk to Dawn) or Wall Switch (with cap) |
| Materiál | Hliník |
| Rozměry položky (D x Š x V) | 11 cm D x 7 cm Š x 4 cm V |
| Typ montáže | Wall Mount / Eave Mount |
10. Záruka a podpora
This product is sold with no stated warranty. For any questions or technical assistance, please refer to the retailer's customer service or the manufacturer's official webstránky pro možnosti podpory.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.