Feit Electric WORK2000 2000 Lumens Rechargeable Portable LED Work Light Instruction Manual

1. Bezpečnostní informace

Před použitím tohoto výrobku si prosím přečtěte a pochopte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo vážnému zranění.

• VAROVÁNÍ: These LED lights are extremely bright. Never point toward your eyes or people around you. Do not point at moving vehicles or aircraft.
• Nebezpečí popálení: Do not touch the lens when the light is on or immediately after use, as it may be hot.
• Udržujte pracovní světlo mimo dosah hořlavých materiálů.
• Do not immerse the unit in water. This product is UL wet rated, meaning it can withstand wet conditions, but it is not submersible.
• Do not attempt to disassemble, repair, or modify the unit. Contact qualified service personnel for repairs.
• Před připojením k napájení se ujistěte, že jsou nabíjecí kabel a port suché.
• Operating temperature range: 32°F to 113°F (0°C to 45°C). Discharge temperature range: -4°F to 113°F (-20°C to 45°C).

Image: Control panel with safety warning and operational details.

2. Konec produktuview

The Feit Electric WORK2000 is a durable, rechargeable, and portable LED work light designed for various applications. It features a robust cast metal housing and is UL wet rated for both indoor and outdoor use.

Klíčové vlastnosti:

• Ultra jasné osvětlení: Outputs up to 2000 lumens of 6500K Daylight color temperature light.
• Nastavitelný jas: Five preset lighting levels (2000, 1600, 1200, 750, or 350 lumens).
• Dobíjecí baterie: Integrated lithium-ion battery provides up to 10 hours of continual light at the lowest setting.
• USB power banka: Nabízí 1 AMP USB port to charge external devices like smartphones.
• Přenosný design: Attached foldable handle allows for easy transport and setup on various surfaces.
• Indikátor baterie: Built-in indicator displays the current battery level.

Obrázek: Přední strana view of the WORK2000 portable LED work light.

Image: Product packaging illustrating key features and design.

3. Nastavení

Charging the Work Light:

1. Locate the charging port on the control panel of the work light.
2. Connect the included charging cable to the work light's charging port.
3. Plug the other end of the charging cable into a compatible USB power adapter (not included) or a USB power source.
4. The battery level indicator lights will illuminate to show charging progress. The indicator will blink while charging.
5. A full charge typically takes several hours. The indicator lights will show a solid charge when complete.

Poznámka: The battery level indicator will blink while charging. Charging time will be longer while the light is in use.

Image: Control panel detailing the charging port and battery indicator.

4. Návod k obsluze

Zapnutí/vypnutí:

• Press the power button (labeled '1' on the control panel image) to turn the work light on or off.

Nastavení jasu:

• Use the brightness adjustment buttons (labeled '2' on the control panel image, '+' for increase, '-' for decrease) to cycle through the five brightness levels.
• Available brightness levels and approximate run times:

Použití jako power banka:

• The work light includes a 1 AMP USB output port (labeled '5V1A' on the control panel image).
• Connect your USB-powered device (e.g., smartphone) to this port using its charging cable to utilize the work light as a portable power bank.

Indikátor stavu baterie:

• The battery level indicator (labeled '3' on the control panel image) shows the remaining charge:

• Four solid lights: 80% - 100% charge
• Three solid lights: 60% - 79% charge
• Two solid lights: 20% - 59% charge
• One solid light: 1% - 19% charge

Foldable Handle and Stand:

• The integrated handle can be folded to serve as a stand, allowing you to position the light at various angles for optimal illumination.
• The handle also facilitates easy carrying of the work light.

Image: Work light in use, providing illumination for electrical work.

Image: Work light in use, providing illumination for mechanical work.

5. Údržba

Čištění:

• Ensure the work light is turned off and unplugged before cleaning.
• Vnější povrchy otřete měkkým, damp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Avoid getting moisture into the charging port or USB output port.

Skladování:

• Pracovní světlo skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
• For prolonged storage, it is recommended to charge the battery periodically (e.g., every 3-6 months) to maintain battery health.

6. Řešení problémů

• Světlo se nerozsvítí: Ensure the battery is charged. If the battery is low, connect the charging cable and allow it to charge.
• Světlo se nenabíjí: Verify that the charging cable is securely connected to both the work light and the power source. Check if the power source is active. Ensure the charging port is clean and free of debris.
• Krátká doba běhu: Battery run time varies significantly with brightness level. Ensure the light is fully charged. Battery performance may decrease over time with repeated use and charging cycles.
• USB power bank not charging devices: Ensure the work light has sufficient battery charge. Check the connection between the device and the USB output port.

If you experience issues not covered here, please refer to the support section for assistance.

7. Specifikace

Obrázek: Diagram rozměrů produktu.

Image: Manufacturer's detailed specifications sheet.

8. Informace o záruce

The Feit Electric WORK2000 Rechargeable Portable LED Work Light comes with a 1letá omezená záruka from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Feit Electric customer support.

9. Podpora

For 24/7 customer support, troubleshooting assistance, or any product-related inquiries, please visit the official Feit Electric help center:

Visit Feit Electric Help Center

Obrázek: Kontaktní informace na zákaznickou podporu.