1. Konec produktuview
The Jorgensen Cabinet Master Parallel Jaw Bar Clamps are designed for woodworking applications requiring precise clamping force and squareness. This 2-pack set features heavy-duty construction and versatile functionality, including the ability to convert into a spreader clamp.
Klíčové vlastnosti:
- Maximum Opening Capacity: 48 palců.
- Clamping Force: Up to 1500 lbs. provided by heavy-duty steel jaws and a high-carbon steel bar.
- Oboustranná hlava: Enables quick conversion for spreader clamping aplikace.
- Clamp Stánek: Integrated stand allows the clamps to stand upright for easy one-handed adjustments and use.
- Ergonomické rukojeti: Maple handles are designed for comfort and to prevent hand fatigue during prolonged use.
- Reinforced Jaws: Steel and castings protected by orange plastic enhance durability and strength.
- Aplikace: Ideal for panel glue-ups, boxes, cabinets, frames, and raised panel doors.
Obrázek 1: Přesview of the Jorgensen Cabinet Master Parallel Jaw Bar Clamp.
2. Nastavení a montáž
Your Jorgensen Cabinet Master clamps come pre-assembled for standard clamping operations. Follow these instructions for initial setup and conversion to spreader mode.
2.1 Standard Clampnastavení
- Ensure the sliding head is positioned with the clamping face towards the fixed jaw.
- Umístěte obrobek mezi čelisti.
- Adjust the sliding head close to the workpiece.
- Tighten the handle to apply clamptlakem.
2.2 Converting to Spreader Clamp
The Cabinet Master clamps can be easily converted for spreading applications. This involves reversing the sliding head on the bar.
- Locate the retaining ring or pin at the end of the bar opposite the fixed jaw.
- Remove the retaining ring/pin to allow the sliding head to be removed from the bar.
- Slide the movable jaw off the bar.
- Reverse the movable jaw so its clamping face points away from the fixed jaw.
- Slide the reversed movable jaw back onto the bar.
- Re-secure the retaining ring/pin at the end of the bar.
Figure 2: Illustration of reversing the sliding head for spreader functionality.
Video 1: Demonstrates the features and conversion of the Jorgensen Cabinet Master Parallel Jaw Bar Clamp. This video shows how to convert the clamp into a spreader by reversing the sliding head, highlighting its versatility for various woodworking tasks.
3. Návod k obsluze
3.1 Applying Clamping Tlak
- Position the workpiece securely on a stable surface.
- Otevřete třamp jaws wider than your workpiece.
- Place the fixed jaw against one side of the workpiece.
- Slide the movable jaw until it makes contact with the other side of the workpiece.
- Rotate the handle clockwise to tighten the clamp and apply the desired pressure. The parallel jaws ensure even pressure distribution.
Figure 3: Applying clamping pressure to a workpiece using the parallel jaws.
3.2 Using the Built-in Clamp Stánek
Integrovaná třamp stand allows the clamps to stand upright on a workbench, facilitating one-handed operation and easier positioning of workpieces.
- Simply place the clamp on its side on a flat surface. The stand will support the clamp, keeping the bar elevated.
- This feature is particularly useful when gluing up panels or assembling cabinets, allowing you to hold the workpiece with one hand while adjusting the clamp s tím druhým.
Figure 4: The built-in clamp stand supports the tool for one-handed operation.
4. Údržba
Proper maintenance ensures the longevity and optimal performance of your Jorgensen Cabinet Master clamps.
- Čištění: After each use, wipe down the steel bar and jaws with a clean, dry cloth to remove sawdust, glue, and other debris.
- Mazání: Periodically apply a light coat of machine oil or dry lubricant to the screw mechanism and the sliding surfaces of the bar to ensure smooth operation. Avoid over-lubricating, as this can attract dust.
- Skladování: Prodejna třamps in a dry environment to prevent rust. Hang them or store them flat to prevent warping of the bar over time.
- Inspekce: Pravidelně kontrolujte třamps for any signs of wear, damage, or loose components. Replace any worn or damaged parts immediately.
5. Řešení problémů
If you encounter issues with your Jorgensen Cabinet Master clamps, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Jaws not parallel / Workpiece bowing | Uneven pressure application; debris in jaw mechanism. | Ensure workpiece is flat and jaws are clean. Apply pressure gradually and evenly. |
| Difficulty sliding movable jaw | Accumulation of dust/debris; lack of lubrication; rust. | Clean the bar and sliding mechanism thoroughly. Apply a light lubricant to the bar. Remove any rust with fine-grit sandpaper and re-lubricate. |
| Rukojeť je tuhá nebo se s ní obtížně otáčí | Screw mechanism is dry or dirty. | Clean the screw threads and apply a suitable lubricant. |
| Clamp not holding pressure | Worn screw threads or internal mechanism. | Inspect the screw and internal components for wear. If significantly worn, contact Jorgensen customer support for replacement parts or service. |
6. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | 99220AE |
| Velikost | 48 palců |
| Clamping Force | Up to 1500 lbs (Tensile strength) |
| Materiál | Legovaná ocel |
| Barva | Pomerančový |
| Hmotnost položky | 10.7 kg (per clamp, approximately) |
| Zahrnuté komponenty | 2-Pack 48-inch Parallel Jaw Bar Clamp Soubor |
| Hloubka hrdla | 3-7/8 palce |
| Šířka čelisti | 1-7/8 palce |
Figure 5: Detailed dimensions and weight specifications for the Jorgensen Cabinet Master clamp.
7. Záruka a podpora
Jorgensen products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Jorgensen webmísto.
For technical support, replacement parts, or any inquiries regarding your Cabinet Master Parallel Jaw Bar Clamps, please contact Jorgensen customer service through their official webwebu nebo kontaktních informací uvedených na obalu produktu.
- Výrobce: Hangzhou Great Star Industrial Co.,LTD.
- Značka: Jorgensen
- Oficiální Webmísto: www.jorgensenclamps.com (Napřampodkaz, skutečný odkaz se může lišit)