Superryba 264765
Superfish Eco Heater 50W Aquarium Heater
Model: 264765
Zavedení
Thank you for choosing the Superfish Eco Heater 50W. This instruction manual provides important information for the safe and efficient use of your new aquarium heater. Please read it thoroughly before installation and operation, and keep it for future reference.
This 50W heater is designed to maintain a stable water temperature in aquariums up to 30 liters, ensuring a healthy environment for your aquatic life.
Důležité bezpečnostní pokyny
- Před použitím tohoto zařízení si přečtěte všechny pokyny.
- NEBEZPEČÍ - To avoid possible electric shock, special care should be taken since water is used in the use of aquarium equipment. For each of the following situations, do not attempt repairs yourself; return the appliance to an authorized service facility for service or discard the appliance.
- Pokud přístroj spadne do vody, NE reach for it. First unplug it and then retrieve it. If electrical components get wet, unplug the appliance immediately.
- Po instalaci spotřebič pečlivě zkontrolujte. Neměl by být zapojován, pokud je voda na částech, které nejsou určeny k mokru.
- Neprovozujte žádný spotřebič, pokud má poškozenou šňůru nebo zástrčku, nebo pokud nefunguje správně, upadl nebo byl jakýmkoli způsobem poškozen.
- To avoid the possibility of the appliance plug or receptacle getting wet, position aquarium stand and tank to one side of a wall-mounted receptacle to prevent water from dripping onto the receptacle or plug. A "drip loop" should be arranged by the user for each cord connecting an aquarium appliance to a receptacle. The "drip loop" is that part of the cord below the level of the receptacle, or the connector if an extension cord is used, to prevent water traveling along the cord and coming into contact with the receptacle. If the plug or receptacle does get wet, NE odpojte kabel. Odpojte pojistku nebo jistič, který napájí spotřebič. Poté odpojte zástrčku a zkontrolujte, zda v zásuvce není voda.
- Když je jakýkoli spotřebič používán dětmi nebo v jejich blízkosti, je nutný pečlivý dohled.
- Abyste předešli zranění, nedotýkejte se pohyblivých částí nebo horkých částí, jako jsou topná tělesa, reflektory, lamp žárovky a podobně.
- Vždy odpojte spotřebič ze zásuvky, když jej nepoužíváte, před nasazením nebo sejmutím dílů a před čištěním. Při vytahování zástrčky ze zásuvky nikdy netahejte za kabel. Uchopte zástrčku a tahem ji odpojte.
- Nepoužívejte spotřebič k jinému než určenému použití. Použití příslušenství, které není doporučeno nebo prodáváno výrobcem spotřebiče, může způsobit nebezpečný stav.
- Neinstalujte ani neskladujte spotřebič tam, kde bude vystaven povětrnostním vlivům nebo teplotám pod bodem mrazu.
- Ensure the heater is fully submerged in water before connecting to power.
- Tento ohřívač je určen pouze pro vnitřní použití.
Konec produktuview
The Superfish Eco Heater 50W is a compact and efficient submersible heater designed for small aquariums. It features a precise temperature adjustment mechanism and a long power cable for flexible placement.

Figure 1: Superfish Eco Heater 50W. This image displays the main heater unit, highlighting its design and key specifications like wattage and IP rating.

Figure 2: Superfish Eco Heater 50W Packaging. The packaging highlights the heater's features, including its wattage, suitable aquarium size, and warranty period.
Nastavení a instalace
- Rozbalit: Opatrně vyjměte ohřívač z obalu. Zkontrolujte, zda není poškozen.
- Umístění: Position the heater vertically in your aquarium, ensuring it is fully submerged in water. Avoid placing it directly in the substrate or against the glass where it might be obstructed. Ensure good water circulation around the heater.
- Montáž: Use the provided suction cups to securely attach the heater to the inside wall of your aquarium.
- Ponoření: The heater must be completely submerged in water at all times during operation. The IP68 rating confirms its suitability for continuous immersion.
- Připojení napájení: Once the heater is securely placed and fully submerged, connect the power plug to a suitable electrical outlet. Ensure a drip loop is formed with the power cord to prevent water from running down to the outlet.
- Úvodní rozcvička: Allow the heater approximately 15-30 minutes to stabilize the water temperature after initial setup.
Návod k obsluze
The Superfish Eco Heater 50W is designed for simple operation. It features an adjustable thermostat to set your desired water temperature.
- Nastavení teploty: The heater has a temperature adjustment knob (typically blue, as seen in Figure 1) at the top. Rotate this knob to set the desired temperature. Refer to the markings on the heater for temperature guidance.
- Sledování: Use a separate, accurate aquarium thermometer to monitor the water temperature. Adjust the heater's setting as needed until the desired temperature is consistently maintained.
- Kontrolka: The heater may feature an indicator light (not explicitly mentioned but common) that illuminates when the heating element is active.
- Stabilní teplota: Once set, the heater will automatically turn on and off to maintain the chosen temperature.
Údržba
Pravidelná údržba zajistí dlouhou životnost a efektivní provoz vašeho ohřívače.
- Odpojit napájení: Always unplug the heater from the power outlet before performing any maintenance or cleaning.
- Ochladit: Allow the heater to cool down completely in the water before removing it from the aquarium. Removing a hot heater from water can cause thermal shock and damage.
- Čištění: Gently wipe the heater's surface with a soft cloth to remove algae or mineral deposits. Do not use abrasive cleaners or harsh chemicals. If stubborn deposits occur, a soft brush or a mild aquarium-safe cleaning solution can be used.
- Inspekce: Periodically inspect the power cord for any signs of damage, fraying, or kinks. Check the heater body for cracks or other physical damage. If any damage is found, discontinue use immediately and replace the heater.
- Výměna vody: During water changes, ensure the water level does not drop below the minimum submersion line of the heater. If it does, unplug the heater until the water level is restored.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Heater not turning on / No heat |
|
|
| Příliš vysoká/nízká teplota vody |
|
|
| Heater indicator light not working |
|
|
If you experience issues not covered here, or if troubleshooting steps do not resolve the problem, please contact Superfish customer support.
Specifikace
| Číslo modelu | 264765 |
| Moc | 50 W |
| svtage | 220-240V / 50-60Hz |
| Objem akvária | 0-30 litrů |
| Rozměry (D x Š x V) | 5 x 23 x 8 cm |
| Hmotnost | 220 gramů |
| Voděodolnost | IP68 (Fully Submersible) |
| Barva | Černý |
| Speciální funkce | Lightweight, Portable, Precise Temperature Adjustment |
Záruka
The Superfish Eco Heater 50W comes with a 2-letá záruka from the date of purchase. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, neglect, or unauthorized modifications.
For warranty service, please contact your retailer or Superfish customer support.
Zákaznická podpora
If you have any questions, require technical assistance, or need to report a problem with your Superfish Eco Heater 50W, please contact Superfish customer support or your local retailer. Please have your model number (264765) and proof of purchase ready when contacting support.
For the most up-to-date contact information, please visit the official Superfish webmísto.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.