ANSTEN HDMI Over Coax Extender MS379-B User Manual

Zavedení

The ANSTEN HDMI Over Coax Extender MS379-B is designed to transmit 1080p Full HD HDMI signals over long distances using a single coaxial cable. This system provides a reliable solution for extending HDMI signals in various environments without signal loss or delay, making it ideal for home theaters, security systems, and professional installations.

1. Obsah balení

• HDMI Transmitter (TX) x1
• HDMI Receiver (RX) x1
• Napájecí adaptér x2
• Uživatelská příručka x1

Při vybalování se prosím ujistěte, že jsou všechny položky přítomny a v dobrém stavu.

2. Klíčové vlastnosti

• Zero-Latency 1080P HD Transmission: Supports lossless 1080p@60Hz Full HD HDMI signals up to 984ft (300m) via RG59/RG-6U Coax cable.
• Wide Resolution Support: Compatible with 1080p@60Hz, 1080p@50Hz, 1080p@30Hz, 1080p@25Hz, 720p@60Hz, 720p@50Hz, and 480p@60Hz. Note: Interlaced signals (1080i/720i) are not supported.
• Robust Thermal Management: Features an aluminum alloy housing with 360° heat dissipation fins for optimal cooling and durability, ensuring long-lasting performance.
• Všestranná aplikace: Suitable for DVR systems, home theaters, bars, classrooms, meeting rooms, TV projects, lecture halls, and security systems.
• Snadná instalace: Compact design for simple setup and portability.

3. Pokyny k nastavení

Follow these steps to set up your ANSTEN HDMI Over Coax Extender:

3.1 Připojení vysílače (TX)

1. Connect your HDMI source device (e.g., PC, Notebook, Apple TV, PS4, Tablet PC) to the HDMI-IN port of the Transmitter (TX) unit using an HDMI cable.
2. Connect one of the provided power adapters to the DC 5-12V port on the Transmitter (TX) unit and plug it into a power outlet.
3. Connect one end of a coaxial cable (RG59/RG6u recommended) to the COAX DATA port na vysílací (TX) jednotce.

3.2 Připojení přijímače (RX)

4. Connect the other end of the coaxial cable from the Transmitter (TX) to the COAX DATA portu na přijímací jednotce (RX).
5. Connect your display device (e.g., Projector, Display, TV) to the HDMI OUT port of the Receiver (RX) unit using an HDMI cable.
6. Connect the second power adapter to the DC 5-12V port on the Receiver (RX) unit and plug it into a power outlet.

4. Návod k obsluze

Once all connections are securely made and both the Transmitter and Receiver units are powered on, the ANSTEN HDMI Over Coax Extender will automatically establish a connection and transmit the HDMI signal. No additional configuration is typically required.

• Ensure your input source provides a progressive signal (e.g., 1080p, 720p, 480p). Interlaced signals (1080i/720i) are not supported and will not display correctly.
• The system is designed for plug-and-play operation. If a signal is not immediately detected, verify all cable connections and power supplies.

5. Řešení problémů

If you encounter issues, please refer to the following troubleshooting steps:

5.1 No Signal or "Check TX's input signal" message

• Verify HDMI Cable: Disconnect and reconnect the HDMI cable from the source to the Transmitter (TX). Try using a different HDMI cable to rule out cable failure.
• Check HDMI Source: Ensure your HDMI source device is powered on and outputting a signal.
• Typ vstupního signálu: Confirm that the HDMI source is outputting a progressive signal (1080p, 720p, 480p). This extender does not support interlaced signals (1080i/720i). If your source outputs interlaced signals, an upscaler may be required before connecting to the extender.

5.2 "Searching TX" message or no signal on Receiver (RX)

• Napájení: Check if both power adapters are correctly connected to the Transmitter (TX) and Receiver (RX) units and that their power indicator lights are on.
• Připojení koaxiálního kabelu: Ensure the coaxial cable is securely connected to both the TX and RX units' COAX DATA ports. Try re-plugging the cable.
• Coaxial Cable Integrity: Test with a different coaxial cable if possible, especially for long runs, to rule out cable damage or poor quality.
• Typ rozhraní: Confirm you are using a BNC interface coaxial cable, not an RF interface.
• Signální světla: Observe the signal lights on both TX and RX units. If they are flashing quickly, it indicates a proper connection.
• Receiver HDMI Cable/Monitor: Try a different HDMI cable from the Receiver (RX) to the display, or test with another HDMI monitor/TV to isolate the issue.

6. Specifikace

7. Záruka a podpora

ANSTEN products are designed for reliability. This product may include a lifetime warranty; please refer to your purchase documentation or contact ANSTEN customer support for specific warranty details.

For additional support and video user guides, please visit the official ANSTEN website or their YouTube channel for comprehensive resources.

For technical assistance, please contact ANSTEN customer support directly through the contact information provided with your product or on the official ANSTEN webmísto.