YIHUA 862BD+ Professional Soldering & Rework Station

1. Úvod

This manual provides essential information for the safe and effective operation, setup, and maintenance of your YIHUA 862BD+ Professional Soldering & Rework Station. This 2-in-1 station combines a hot air rework station and a soldering iron, designed for various electronic repair and assembly tasks. Please read this manual thoroughly before using the device.

2. Bezpečnostní pokyny

To prevent injury or damage to the equipment, always observe the following safety precautions:

• Elektrická bezpečnost: This unit is designed to operate on 110-127V US mains electricity. DO NOT use the product on mains electricity at 220V. Ensure the power outlet is properly grounded.
• Nebezpečí tepla: The soldering iron tip and hot air nozzle reach very high temperatures. Always use caution and avoid direct contact with skin or flammable materials. Allow components to cool before handling.
• Větrání: Use the station in a well-ventilated area to avoid inhaling solder fumes, which can be harmful. Consider using a fume extractor.
• Ochrana očí: Vždy používejte ochranné brýle, abyste si chránili oči před stříkající pájkou nebo poletujícími úlomky.
• Pracovní oblast: Keep your work area clean and free of clutter. Ensure no flammable liquids or gases are near the station.
• Děti a domácí mazlíčci: Udržujte zařízení mimo dosah dětí a domácích zvířat.
• Údržba: Před prováděním jakékoli údržby nebo čištění odpojte napájecí kabel.

3. Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené položky:

• YIHUA 862BD+ Professional Soldering & Rework Station Main Unit
• Horkovzdušná pistole
• Páječka
• Držák na páječku
• Držák horkovzdušné pistole
• 50g 0.8mm Lead-Free Solder Wire
• 5 x Assorted Soldering Iron Tips
• 4 x Assorted Hot Air Nozzles (#2300 bundle: 3 round-shape, 1 square-shape)
• Čisticí houba
• 1 x Pair ESD-Safe Tweezers
• 1 x Pájecí přísavka
• 1 x Cleaning Kit (Brass Ball)
• 1 x IC Extractor

Figure 3.1: YIHUA 862BD+ Soldering & Rework Station with all included accessories.

Figure 3.2: Assorted hot air nozzles for various applications.

Figure 3.3: Spool of lead-free solder wire.

Figure 3.4: Soldering iron with its stand and brass tip cleaner.

4. Nastavení

Pro počáteční nastavení postupujte takto:

1. Rozbalení: Opatrně vyjměte všechny součásti z obalu a zkontrolujte, zda nejsou poškozené.
2. Umístění: Place the main unit on a stable, heat-resistant surface in a well-ventilated area. Ensure adequate space around the unit for airflow.
3. Připojení horkovzdušné pistole: Plug the hot air gun connector into the designated port on the main unit. Secure it if necessary. Place the hot air gun in its holder.
4. Připojení páječky: Plug the soldering iron connector into the designated port on the main unit. Place the soldering iron in its stand.
5. Připojení napájení: Ensure both the SMD Rework Station and Soldering Station power switches are in the OFF position. Connect the power cord to the main unit and then to a 110-127V AC grounded power outlet.

5. Návod k obsluze

5.1. Obecný provoz

1. Zapnutí: Flip the respective power switches (SMD Rework Station and/or Soldering Station) to the ON position. The digital displays will illuminate.
2. Nastavení teploty: Use the temperature control knobs or buttons for each station to set the desired temperature. The unit features temperature stabilization to maintain the set temperature steadily.
3. Vypnout: After use, turn off both power switches and allow the hot air gun and soldering iron to cool down completely before storing.

5.2. Temperature Display Unit (°F/°C) Conversion

To switch between Fahrenheit (°F) and Celsius (°C) temperature display:

1. Turn on the SMD rework station power switch only.
2. Simultaneously press and hold the REWORK STATION ▲ (up) button and the SOLDERING STATION ▼ (down) button for 2 seconds.
3. Press the SOLDERING STATION ▲ (up) button to display °C or ▼ (down) button to display °F.
4. Stop operating for 4 seconds to exit the setting and save your selection.

Figure 5.1: Guide for converting temperature display between Fahrenheit and Celsius.

5.3. Hot Air Rework Station

• Rozsah teplot: 100–480 °C (212–896 °F).
• Výběr trysky: Choose an appropriate nozzle from the #2300 set (round or square) for your specific component size and application. Attach it securely to the hot air gun.
• Nastavení proudění vzduchu: Use the airflow control knob to adjust the air volume. Start with lower airflow for delicate components and increase as needed.
• Operace: Direct the hot air stream evenly over the component to be reworked. Avoid concentrating heat on one spot for too long.

5.4. Soldering Station

• Rozsah teplot: 200–480 °C (392–896 °F).
• Výběr hrotu: Select an appropriate soldering iron tip for your task. Ensure it is securely fastened.
• Cínování špičky: Before first use and periodically during operation, tin the tip by applying a small amount of solder to it. This helps prevent oxidation and improves heat transfer.
• Pájení: Apply the heated tip to both the component lead and the PCB pad simultaneously. Feed solder onto the joint, not directly onto the iron tip. Remove the solder, then the iron, allowing the joint to cool naturally.

6. Údržba

Pravidelná údržba zajišťuje optimální výkon a dlouhou životnost vaší stanice:

• Čištění hrotu páječky: Regularly clean the soldering iron tip using the brass ball cleaner or a damp sponge. This removes oxidation and old solder, maintaining efficient heat transfer.
• Čištění horkovzdušné trysky: Ensure hot air nozzles are free from debris or solder residue. Clean them gently with a brush or appropriate tool when cool.
• Čištění jednotky: Wipe the main unit and handles with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Skladování: Store the station in a dry, dust-free environment when not in use. Ensure all components are cool before storage.

7. Řešení problémů

Pokud narazíte na problémy, podívejte se na následující běžné problémy a jejich řešení:

8. Specifikace

9. Záruka a podpora

YIHUA poskytuje 12měsíční technická záruka výrobce exkluzivně v USA for this product. For any technical assistance or support, please utilize the 24/7 professional assistance available on Amazon. Refer to your purchase documentation for specific contact details or visit the official YIHUA store on Amazon.