Ewent EW1538 Dual Monitor Desk Mount

1. Úvod

The Ewent EW1538 Dual Monitor Desk Mount is designed to create an ergonomic and space-saving workspace. This gas spring-powered desk mount allows you to position two monitors (13-27 inches, 2-7 kg each) at your ideal height and viewing angle with ease. Its flexible adjustments help reduce strain on your neck, back, and shoulders, promoting a more comfortable and productive environment. The integrated cable management system keeps your workspace tidy.

Image 1.1: Ewent EW1538 Dual Monitor Desk Mount without monitors.

2. Bezpečnostní informace

Před montáží a použitím si pečlivě přečtěte všechny pokyny. Nedodržení těchto pokynů může vést k poškození majetku, vážnému zranění nebo smrti.

• Nosnost: Do not exceed the maximum weight capacity of 7 kg (15.4 lbs) per monitor. Ensure your monitors are within the specified weight range.
• Velikost monitoru: Tento držák je vhodný pro monitory s úhlopříčkou od 13 do 27 palců.
• Kompatibilita VESA: Ensure your monitors have VESA mounting patterns (75x75mm or 100x100mm).
• Tloušťka stolu: Verify your desk is thick enough and structurally sound to support the combined weight of the mount and monitors.
• Body sevření: Be aware of moving parts and potential pinch points during assembly and adjustment. Keep hands clear.
• Shromáždění: Assemble the product exactly as described in this manual. Do not modify the mount.
• Děti: Keep children away from the assembly area. Small parts may be a choking hazard.

3. Obsah balení

Before assembly, ensure all parts are present and undamaged. If any parts are missing or damaged, contact your retailer for assistance.

• Stolní základna
• Hlavní pól
• Sestava ramene pro dva monitory
• VESA Mounting Plates (x2)
• Hardware Kit (screws, washers, spacers)
• Allen Keys / Wrenches
• Klipy pro správu kabelů

4. Pokyny k nastavení

Follow these steps to assemble and install your Ewent EW1538 Dual Monitor Desk Mount.

4.1. Attach Base to Pole

1. Place the desk base on a stable surface.
2. Insert the main pole into the designated slot on the desk base.
3. Secure the pole to the base using the provided screws and an Allen key from underneath the base. Tighten firmly.

4.2. Attach Monitor Arm Assembly to Pole

1. Slide the dual monitor arm assembly onto the main pole.
2. Adjust the arm to your desired initial height and secure it by tightening the locking screw on the back of the arm assembly with an Allen key.

Obrázek 4.1: Konecview of the monitor mount components and assembly.

4.3. Připevnění desek VESA k monitorům

1. Opatrně položte monitor displejem dolů na měkký, čistý povrch.
2. Attach a VESA mounting plate to the back of each monitor using the appropriate screws and washers from the hardware kit. Ensure the screws are tightened securely but do not overtighten.

Image 4.2: Detail of VESA plate attachment to a monitor.

4.4. Montáž monitorů na ramena

1. With assistance, carefully lift each monitor and slide the VESA plate attached to the monitor onto the corresponding arm bracket.
2. Ensure the monitor is securely seated on the bracket. Some brackets may have a quick-release or locking mechanism; engage it if present.

Obrázek 4.3: Přední strana view of two monitors mounted on the desk stand.

4.5. Upravte napnutí plynové pružiny

1. The gas spring tension may need adjustment to properly support your monitor's weight.
2. Locate the tension adjustment screw on the arm (usually near the VESA plate or the arm pivot point).
3. If the monitor sags, turn the screw clockwise to increase tension. If the monitor floats up too easily, turn the screw counter-clockwise to decrease tension. Adjust until the monitor stays in place when moved.

4.6. Správa kabelů

1. Route your monitor cables (power, video) through the integrated cable management clips or channels on the monitor arms and down the main pole.
2. This helps keep your workspace organized and prevents cable clutter.

Obrázek 4.4: Zadní strana view illustrating cable management with monitors mounted.

5. Návod k obsluze

The Ewent EW1538 offers various adjustments for optimal viewpohodlí.

• Nastavení výšky: Gently push or pull the monitor up or down to adjust its height. The gas spring mechanism will hold it in place.
• Nastavení sklonu: Tilt the monitor screen up or down to reduce glare and find your preferred viewúhel.
• Nastavení otáčení: Swivel the monitor left or right to share your screen or adjust your viewing pozice.
• Otáčení: Otočením monitoru o 360 stupňů přepínáte mezi orientací na šířku a na výšku.

Image 5.1: Monitors adjusted to different orientations (landscape and portrait).

6. Údržba

Pravidelná údržba zajistí dlouhou životnost a správnou funkci držáku monitoru.

• Čištění: Očistěte držák měkkým hadříkemamp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Zkontrolujte připojení: Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené. V případě potřeby je dotáhněte.
• Plynová pružina: The gas spring is designed for long-term use and generally requires no maintenance. If adjustment becomes difficult, re-check the tension setting.

7. Řešení problémů

If you encounter issues with your monitor mount, refer to the following common solutions:

8. Specifikace

• Model: EW1538
• Značka: Ewent
• Kompatibilita velikosti obrazovky: 13 - 27 palce
• Nosnost: 2 - 7 kg (4.4 - 15.4 lbs) per monitor
• Kompatibilita VESA: 75x75mm, 100x100mm
• Hnutí: Height adjustment (gas spring), Tilt (up to 15 degrees), Swivel, 360° Rotation
• Materiál: Odolná kovová a plastová konstrukce
• Barva: Černý
• Hmotnost produktu: Přibližně 6 kg (13.2 lb)

9. Záruka a podpora

For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Ewent webwebu. Kontaktní údaje zákaznického servisu obvykle naleznete tam.