Graco 2140059

Graco FastAction SE Travel System Instruction Manual

Model: 2140059

1. Konec produktuview

The Graco FastAction SE Travel System is designed for convenience and safety, featuring a quick-folding stroller and a compatible infant car seat. This system is suitable for infants from 4-35 lb and up to 32 inches in height when using the SnugRide 35 Lite Infant Car Seat.

Graco FastAction SE Travel System with stroller and infant car seat

Obrázek 1.1: Graco FastAction SE Travel System. This image shows the complete travel system, including the stroller and the SnugRide 35 Lite Infant Car Seat.

2. Bezpečnostní informace

Always read and understand all instructions and warnings before using this product. Failure to follow these instructions could result in serious injury or death. Keep this manual for future reference.

  • Nikdy nenechávejte dítě bez dozoru v kočárku nebo autosedačce.
  • Před vložením dítěte do kočárku se ujistěte, že jsou všechny zajišťovací mechanismy zajištěny.
  • Vždy používejte systém bezpečnostních pásů k zajištění dítěte.
  • Do not overload the storage basket or hang bags on the handle, as this can cause the stroller to tip.
  • The infant car seat is designed for rear-facing use only for infants weighing 4-35 lb and up to 32 inches.
  • Never place an infant car seat on a raised surface like a counter or table.
  • Refer to your vehicle's owner's manual for proper car seat installation.

3. Nastavení a montáž

3.1 Sestavení kočárku

  1. Rozložení kočárku: Release the storage latch. Hold the handle and lift upwards until the stroller clicks into place. Ensure all parts are securely locked.
  2. Připevnění kol: Insert the wheel axles into the designated slots until they click. Pull on the wheels to ensure they are secure.
  3. Attaching Child's Tray: Align the child's tray with the slots on the stroller frame and push down until it locks.
  4. Attaching Parent's Tray: Snap the parent's tray onto the stroller handle.
Graco FastAction SE Stroller with feature callouts

Obrázek 3.1: Stroller components and features. This image highlights the parent's tray, child's tray, canopy, reclining seat, folding mechanism, frame, and storage basket.

3.2 Příprava dětské autosedačky

The Graco SnugRide 35 Lite Infant Car Seat comes pre-assembled. Ensure the harness straps are adjusted correctly for your infant's size. Refer to the separate car seat manual for detailed harness adjustment instructions.

Graco SnugRide 35 Lite Infant Car Seat

Obrázek 3.2: Graco SnugRide 35 Lite Infant Car Seat. This image shows the infant car seat designed for rear-facing use for infants from 4-35 lb and up to 32 inches.

4. Návod k obsluze

4.1 Provoz kočárku

  1. Folding the Stroller (FastAction Fold):

    Locate the FastAction fold strap in the seat. Pull the strap upwards with one hand. The stroller will fold compactly. Engage the storage latch to keep it folded.

    Woman carrying folded Graco stroller and infant car seat

    Obrázek 4.1: One-second, one-hand FastAction Fold. This image demonstrates the ease of carrying the folded stroller and car seat.

    Graco FastAction SE Stroller in folded position

    Obrázek 4.2: Compact folded stroller. The stroller folds 25% smaller than previous models for easy storage.

  2. Sklopení sedadla: Locate the recline lever or strap behind the seat. Adjust the seat to the desired multi-position recline.
  3. Použití brzd: Push down on the brake pedal located near the rear wheels to engage the brakes. Lift up to release. Always engage brakes when the stroller is stationary.
  4. Using Trays: The child's tray and parent's tray provide convenient storage for snacks, drinks, and personal items. The child's tray can fold for a more compact stroller fold.
  5. Child in Graco stroller with parent, showing trays

    Obrázek 4.3: Stroller with child and parent, highlighting the utility of the parent's and child's trays for snacks and drinks.

4.2 Infant Car Seat Installation and Use

  1. Montáž vozidla: The SnugRide 35 Lite Infant Car Seat can be installed using your vehicle's LATCH system or seat belt. Always refer to the car seat manual and your vehicle's owner's manual for correct installation. Ensure the car seat is securely installed and does not move more than one inch side-to-side or front-to-back at the belt path.
  2. Attaching to Stroller: Place the infant car seat onto the stroller frame, ensuring it clicks securely into the adapters. Pull up on the car seat to confirm it is locked in place.
  3. Removing from Stroller: Locate the release levers on the sides of the car seat or stroller adapters. Squeeze or lift the levers and lift the car seat off the stroller.

5. Údržba a péče

  • Cleaning Stroller Seat Pad: Podívejte se na péči tag on your seat pad for washing instructions. Typically, machine wash cold on a delicate cycle and line dry. Do not use bleach.
  • Cleaning Stroller Frame: Otřete rám reklamouamp hadříkem a jemným mýdlem. Důkladně osušte.
  • Cleaning Car Seat Pad: Podívejte se na péči tag on your car seat pad for washing instructions. Typically, machine wash cold on a delicate cycle and line dry. Do not use bleach.
  • Popruhy postroje: Otřete popruhy bezpečnostního pásu reklamouamp hadříkem. Neperte v pračce ani neponořujte do vody, mohlo by dojít k oslabení popruhů.
  • kola: Periodically check wheels for wear and tear. Clean any debris from the wheel axles.
  • Skladování: Store the travel system in a dry, cool place away from direct sunlight.

6. Řešení problémů

ProblémMožná příčinaŘešení
Kočárek se snadno neskládá.Storage latch engaged, seat not fully upright, or mechanism obstructed.Ensure storage latch is released. Push seat back to fully upright position. Check for obstructions in the folding mechanism.
Kola vržou nebo se s nimi obtížně otáčí.Debris in wheel axles, lack of lubrication.Vyčistěte kola a nápravy. V případě potřeby naneste malé množství maziva na bázi silikonu.
Car seat does not attach securely to stroller.Car seat not aligned correctly, or adapters not fully engaged.Ensure car seat is properly aligned with the stroller adapters. Push down firmly until you hear a click. Pull up to verify security.
Popruhy postroje se obtížně nastavují.Straps twisted or buckle mechanism obstructed.Untwist straps. Ensure no fabric or debris is blocking the buckle. Refer to the car seat manual for detailed harness adjustment.

7. Specifikace

FunkceDetail
ZnačkaGraco
Číslo modelu2140059
BarvaDerby
MateriálMetal, Polyester (Stroller), Fabric (Seat)
Věkové rozmezí (kočárek)Dítě
Doporučená maximální hmotnost (kočárek)50 libry
Item Weight (Stroller)21.3 libry
Typ postroje5 Bod
Kompatibilita autosedačekYes (Includes SnugRide 35 Lite Infant Car Seat)
Infant Car Seat Weight Range4-35 lb (rear-facing)
Infant Car Seat Height LimitAž 32 palců
Car Seat Installation TypeVÍCE
Brzdový systém kočárkuAno
UPC047406176984

8. Záruka a podpora

Graco products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Graco webUschovejte si doklad o koupi pro případ reklamace.

For customer support, replacement parts, or further assistance, please contact Graco customer service. Contact details can typically be found on the Graco webmístě nebo na obalu produktu.

Online zdroje: www.gracobaby.com

© 2024 Graco. All rights reserved. This manual is for informational purposes only.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.