BABYLO Westland Cot Bed Instruction Manual

Zavedení

The BABYLO Westland Cot Bed is a versatile furniture piece designed to create a tranquil and contemporary nursery. This transforming cot bed features three adjustable base heights and can easily convert into a stylish first toddler bed, adapting to your child's growth from birth up to approximately 5 years of age. This manual provides essential information for the safe assembly, operation, and maintenance of your cot bed.

Bezpečnostní informace

Your child's safety is paramount. Please read and understand all instructions before assembly and use. Keep this manual for future reference.

• VAROVÁNÍ: Do not use the cot bed if any part is broken, torn, or missing. Use only spare parts approved by the manufacturer.
• VAROVÁNÍ: Do not leave anything in the cot bed or place the cot bed close to another product, which could provide a foothold or present a danger of suffocation or strangulation, e.g., strings, blind/curtain cords, etc.
• VAROVÁNÍ: V dětské postýlce nepoužívejte více než jednu matraci.
• VAROVÁNÍ: Be aware of the risk of open fire and other sources of strong heat, such as electric bar fires, gas fires, etc., in the near vicinity of the cot bed.
• VAROVÁNÍ: Do not use the cot bed if the child can climb out of it.
• The cot bed is suitable for a child from birth up to approximately 5 years.
• The recommended mattress dimensions are 140L x 70W x 10D cm. Ensure the mattress fits snugly to prevent entrapment.
• Regularly check all fittings and components are fully tightened and in good working order.
• This product conforms to EN 716-1 and BS 8509:2008 +A1: 2011 safety standards.

Seznam dílů

Před montáží se ujistěte, že jsou všechny díly přítomny a nepoškozené. Pokud některé díly chybí nebo jsou poškozené, nepokračujte v montáži a kontaktujte zákaznickou podporu.

• Cot Bed Frame Components (Side Rails, End Panels)
• Matrace Base
• Allen Key
• Screws and Bolts (various sizes)
• Návod k použití (tento dokument)

Nastavení a montáž

Assembly requires two adults. Follow the steps carefully. Do not overtighten screws until instructed.

1. Rozbalte komponenty: Opatrně vyjměte všechny díly z obalu a položte je na měkký, čistý povrch, abyste zabránili poškrábání.
2. Sestavte koncové panely: Attach the legs to the main end panels using the provided screws and allen key. Ensure they are securely fastened but do not fully tighten yet.
3. Attach Side Rails (Cot Mode): Connect the side rails to the assembled end panels. The cot features a protective teething rail along the top of the side rails.
4. Install Mattress Base: Insert the mattress base into the desired height setting. The cot bed offers 3 base heights:
   • Highest Position (0-6 months): For newborns, allowing easy access to your baby.
   • Middle Position (6-9 months): As your baby grows and begins to sit up.
   • Lowest Position (9+ months): When your baby can stand, to prevent climbing out.
   

   Figure 1: Adjustable Base Heights

5. Konečné utažení: Once all components are in place and aligned, fully tighten all screws and bolts using the allen key. Ensure the cot bed is sturdy and stable.

Figure 2: Assembled Cot Bed (White)

Návod k obsluze

Adjusting Base Height

To adjust the mattress base height, remove the mattress and carefully detach the base from its current position. Re-attach it to the desired height setting, ensuring all four corners are securely fastened. Always select the lowest possible base height once your child can sit up unaided to prevent them from climbing out.

Přestavba na dětskou postel

When your child is ready to transition from a cot to a toddler bed (typically around 18 months to 2 years, or when they can climb out of the cot), the Westland Cot Bed can be easily converted. This provides a familiar sleeping environment for your child's first big bed.

1. Remove Side Rails: Carefully detach one or both side rails from the cot bed frame.
2. Překonfigurovat: The end panels and mattress base remain in place. The cot bed is designed to function as a toddler bed with the absence of the side rails.
3. Zajistěte stabilitu: Double-check that all remaining connections are secure and tightened.

Figure 3: Converted Toddler Bed (White)

Údržba

Proper maintenance will extend the life of your BABYLO Westland Cot Bed.

• Čištění: Wipe with a dry cloth. Do not use abrasive cleaners or strong detergents, as these may damage the finish.
• Pravidelné kontroly: Periodically inspect all screws, bolts, and fittings to ensure they are tight and secure. Tighten as necessary.
• Skladování: If storing the cot bed, disassemble it carefully and store all parts in a dry, cool place away from direct sunlight and extreme temperatures.

Odstraňování problémů

Specifikace

Obrázek 4: Rozměry produktu

Záruka a podpora

BABYLO products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the terms and conditions provided at the point of purchase or visit the official BABYLO webmísto.

If you have any questions, require replacement parts, or need assistance with assembly or troubleshooting, please contact BABYLO customer support. Contact details can typically be found on the product packaging or the brand's official webmísto.

BABYLO Official Webmísto: Visit the BABYLO Store on Amazon