Casio IQ-1106J Radio Wave Wall Clock Instruction Manual

1. Úvod

Děkuji za nákupasing the Casio IQ-1106J Radio Wave Wall Clock. This clock features an analog display within an octagonal wooden frame, designed to provide accurate timekeeping through radio wave reception. This manual will guide you through the installation, operation, and maintenance of your new clock.

Klíčové vlastnosti:

• Radio Wave Reception: Automatically adjusts time for precision.
• Analogový displej: Classic and easy-to-read time presentation.
• Octagonal Wooden Frame: Adds a warm and elegant touch to any room.
• Step Second Hand: Provides clear second-by-second movement.

Obrázek: Detail view of the clock face, highlighting the warm wooden frame and the step second hand movement.

2. Obsah balení

Ujistěte se prosím, že balíček obsahuje všechny následující položky:

• Casio IQ-1106J Wall Clock
• Alkalická baterie AA (x1)
• Montážní šrouby na stěnu
• Závěsný hardware
• Návod k použití (tento dokument)

Image: The included wall hanging hardware, designed for secure installation.

3. Bezpečnostní informace

• Bezpečnost baterie: Use only the specified AA alkaline battery. Do not mix old and new batteries, or different types of batteries. Remove batteries if the clock will not be used for an extended period. Dispose of batteries according to local regulations.
• Bezpečnost montáže: Ensure the wall surface is strong enough to support the clock's weight (approximately 940g) and the hanging hardware. Use appropriate tools and follow mounting instructions carefully to prevent the clock from falling.
• Umístění: Avoid placing the clock in direct sunlight, near strong magnetic fields, or in areas with extreme temperatures or high humidity, as this may affect performance and longevity.

4. Nastavení

4.1 Instalace baterie

1. Najděte přihrádku na baterie na zadní straně hodin.
2. Otevřete kryt bateriového prostoru.
3. Insert one (1) AA alkaline battery, ensuring the positive (+) and negative (-) terminals are aligned correctly according to the diagram inside the compartment.
4. Bezpečně zavřete kryt bateriového prostoru.

Obrázek: Zadní strana view of the clock, indicating the battery compartment and control buttons.

4.2 Initial Time Setting and Radio Wave Reception

After installing the battery, the clock will automatically attempt to receive the time calibration signal. This process may take several minutes. Place the clock in an area with good signal reception, away from electronic devices that may cause interference.

• The clock hands will move to the 12 o'clock position and then begin searching for the radio signal.
• A radio wave reception lamp (if present, refer to the back of the clock) will indicate the status of the reception.
• Once the signal is successfully received, the clock will automatically set itself to the correct time.

4.3 Montáž na stěnu

Use the provided hanging hardware and screws to securely mount the clock on a wall.

1. Vyberte vhodné místo na pevné zdi.
2. Mark the desired position for the hanging hardware.
3. Install the wall mounting screws and hanging hardware according to the instructions provided with the hardware, ensuring it is firmly secured. The hook can hold up to approximately 5kg.
4. Carefully hang the clock onto the installed hardware, ensuring it is stable and level.

5. Návod k obsluze

5.1 Radio Reception Function

The Casio IQ-1106J clock is equipped with a radio wave reception function to maintain accurate time.

• Automatický příjem: The clock will periodically attempt to receive the time calibration signal to ensure accuracy. This typically occurs overnight.
• Ruční příjem: If you need to force a time adjustment, you can initiate manual reception. Refer to the buttons on the back of the clock (e.g., 'WAVE CEPTOR' or 'RECEIVE' button) and press it to start manual reception. The radio wave reception lamp will indicate the reception status.
• Radio Wave Reception ON/OFF Function: Some models may include a switch or button to enable or disable the radio wave reception. If you are in an area with poor reception or wish to conserve battery life, you may turn this function OFF. Remember to turn it ON for automatic time synchronization.

Image: The 'Wave Ceptor' feature, illustrating the clock's ability to receive radio signals for precise timekeeping.

5.2 Zobrazení času

The clock features a clear analog display with hour, minute, and second hands. The time is automatically adjusted via radio wave reception, eliminating the need for manual time setting under normal operating conditions.

6. Údržba

6.1 Čištění

• Otřete povrch hodin měkkým, suchým hadříkem.
• Na odolné nečistoty lehce damphadřík vodou a jemným čisticím prostředkem a poté ihned otřete dosucha.
• Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani chemické spreje, protože by mohly poškodit povrchovou úpravu a vnitřní součásti.

6.2 Výměna baterie

When the clock hands stop moving or the time becomes inaccurate despite good radio reception, it is likely time to replace the battery.

1. Sejměte hodiny ze zdi.
2. Otevřete přihrádku na baterie na zadní straně.
3. Remove the old AA alkaline battery.
4. Insert a new AA alkaline battery, observing the correct polarity (+/-).
5. Close the battery compartment and re-hang the clock. The clock will then attempt to receive the time signal.

7. Řešení problémů

8. Specifikace

Image: The clock displaying its physical dimensions and weight for reference.

9. Záruka a podpora

Casio products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official Casio webmísto.

For further assistance, troubleshooting, or to inquire about replacement parts, please contact Casio customer support or visit the official Casio store online:

Visit the Official Casio Store