ZdalaMit NC306UH

ZdalaMit NC306UH Replacement Remote Control User Manual

For Sanyo Soundbar Models FWSB415E-A and FWSB415EA

1. Úvod

This manual provides comprehensive instructions for the ZdalaMit NC306UH replacement remote control. This remote is designed to function with specific Sanyo Soundbar models without requiring any programming. Please read this manual carefully to ensure proper use and to maximize the functionality of your remote control.

2. Obsah balení

  • 1 x ZdalaMit NC306UH Replacement Remote Control

Poznámka: Baterie nejsou součástí balení a je nutné je zakoupit samostatně.

3. Specifikace

Název modelu NC306UH (also compatible with NC306 designation)
Značka ZdalaMit
Kompatibilní zařízení Sanyo Soundbar FWSB415E-A, FWSB415EA
Technologie připojení Infračervený (IR)
Napájení 2 x 1.5V AAA alkalické baterie
Počet tlačítek 18
Maximální dosah Přibližně 33 stop (10 metru)
Rozměry (D x Š x V) 4.17" x 1.59" x 0.55" (10.6 cm x 4.0 cm x 1.4 cm)
Hmotnost položky 40 gramů (bez baterií)
Barva Černý

4. Nastavení: Instalace baterie

The remote control requires two AAA alkaline batteries for operation. Follow these steps to install the batteries:

  1. Najděte kryt prostoru pro baterie na zadní straně dálkového ovladače.
  2. Stiskněte jazýček a posuňte kryt dolů, abyste otevřeli přihrádku.
  3. Vložte dvě nové alkalické baterie typu AAA a ujistěte se, že kladný (+) a záporný (-) pól správně odpovídají označením uvnitř přihrádky.
  4. Zasuňte kryt přihrádky na baterie zpět na místo, dokud bezpečně nezacvakne.
ZdalaMit NC306UH Remote Control front view

Obrázek: Přední strana view of the ZdalaMit NC306UH remote control, showing button layout. The battery compartment is on the reverse side.

Once batteries are installed, the remote control is ready for use. No additional programming or pairing is required for compatible Sanyo Soundbar models.

5. Návod k obsluze

This remote control is designed to replicate the functions of your original Sanyo Soundbar remote. Point the remote directly at your soundbar's IR receiver for optimal performance.

5.1. Funkce tlačítekview

ZdalaMit NC306UH Remote Control angled view

Obrázek: Úhlový view of the ZdalaMit NC306UH remote control, highlighting the ergonomic design and button arrangement.

  • Výkon (): Zapíná nebo vypíná soundbar.
  • HLASITOST + / -: Increases or decreases the volume level.
  • Ztlumit (🔇): Ztlumí nebo zapne zvuk.
  • Input Selection (LINE, OPT/COAX, USB, AUX, Bluetooth): Selects the audio input source for the soundbar.
  • PÁR: Initiates Bluetooth pairing mode (if supported by your soundbar).
  • Sound Modes (STANDARD, SPORTS, MUSIC, MOVIE, NEWS, NIGHT, SURROUND): Switches between various preset audio equalization modes.
  • Ovládací prvky přehrávání ( Předchozí, Přehrát/Pozastavit, Next): Controls media playback when using compatible input sources like USB or Bluetooth.

Refer to your Sanyo Soundbar's original manual for detailed information on specific functions and their interaction with the soundbar.

6. Kompatibilita

This ZdalaMit NC306UH replacement remote control is specifically designed to be compatible with the following Sanyo Soundbar models:

  • Sanyo FWSB415E-A Soundbar
  • Sanyo FWSB415EA Soundbar

If your soundbar model is not listed, functionality may vary or not be supported.

7. Řešení problémů

  • Dálkové ovládání nereaguje:
    • Ensure new AAA batteries are correctly installed with proper polarity (+/-).
    • Vyměňte staré baterie za nové.
    • Zkontrolujte, zda se mezi dálkovým ovladačem a infračerveným přijímačem soundbaru nenacházejí nějaké překážky.
    • Ensure you are within the maximum operating range (approximately 33 feet) and pointing the remote directly at the soundbar.
  • Nefunkční konkrétní tlačítka:
    • Verify that the function you are trying to use is supported by your specific Sanyo Soundbar model.
    • Some functions may require the soundbar to be in a particular mode (e.g., Bluetooth pairing requires the soundbar to be in Bluetooth input mode).
  • Rušení:
    • Bright light sources, especially fluorescent lights or direct sunlight, can interfere with IR signals. Try operating the remote in a different lighting condition.
    • Jiná elektronická zařízení vysílající infračervené signály mohou způsobovat rušení.

8. Údržba

  • Čištění: Dálkový ovladač otírejte měkkým, suchým hadříkem. Nepoužívejte tekuté čisticí prostředky ani abrazivní materiály.
  • Skladování: Dálkový ovladač skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
  • Péče o baterie: Pokud dálkový ovladač nebudete delší dobu používat, vyjměte baterie, abyste zabránili jejich vytečení a možnému poškození.
  • Vyhněte se kapkám: Chraňte dálkový ovladač před fyzickými nárazy, protože pády mohou poškodit vnitřní součásti.

9. Záruka a podpora

This ZdalaMit remote control comes with a 1-letá záruka od data nákupu. Tato záruka se vztahuje na výrobní vady vzniklé při běžném používání.

For warranty claims or technical support, please contact the seller or manufacturer through the platform where the product was purchased. Please have your purchase details and product model number (NC306UH) available when contacting support.

© 2026 ZdalaMit. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.