EuroFone V10 Motorcycle Helmet Bluetooth Headset User Manual

1. Úvod

The EuroFone V10 Motorcycle Helmet Bluetooth Headset is designed to provide seamless communication and entertainment for motorcycle riders. Featuring advanced Bluetooth 5.0 technology, DSP noise reduction, and IP65 waterproof rating, this headset ensures clear audio and reliable performance in various conditions. It supports full-duplex intercom for up to 10 riders, allowing for group conversations during rides. Enjoy music, FM radio, GPS navigation, and phone calls directly through your helmet.

Figure 1: EuroFone V10 Main Unit

This image shows the compact black and blue EuroFone V10 Bluetooth headset unit, featuring a power button and control buttons on its surface.

2. Obsah balení

Po vybalení zkontrolujte obsah balení, abyste se ujistili, že jsou přítomny všechny komponenty:

• EuroFone V10 Main Unit
• Helmet Speakers (with attached microphone)
• Mounting Bracket (clip-on and adhesive options)
• Nabíjecí kabel USB typu C.
• Mikrofonní houby
• Uživatelská příručka (tento dokument)
• Small Hex Key (for mounting)
• Additional adhesive pads

Figure 2: Packaging Display

This image displays all the components included in the EuroFone V10 package, such as the main unit, speakers, microphone, charging cable, and various mounting accessories.

3. Nastavení a instalace

3.1 Nabíjení zařízení

Before first use, fully charge the EuroFone V10. Connect the provided USB Type-C cable to the charging port on the unit and plug the other end into a USB power adapter (not included) or a computer USB port. The LED indicator will show charging status and turn off when fully charged. A full charge takes approximately 2 hours and provides up to 15 hours of working time or 350 hours of standby time.

3.2 Instalace náhlavní soupravy na helmu

The EuroFone V10 can be installed using either the clip-on mount or the adhesive mount.

1. Vyberte místo montáže: Select a flat surface on the left side of your helmet where the unit will not obstruct vision or movement.
2. Instalace reproduktorů:
   • Remove the helmet's inner padding.
   • Attach the speakers to the ear pockets inside the helmet using the adhesive pads. Ensure the speakers are positioned directly over your ears for optimal sound.
   • Route the speaker wires discreetly under the helmet padding to the chosen mounting location for the main unit.
3. Instalace mikrofonu:
   • For full-face helmets, use the soft-wire microphone and attach it to the inside of the chin bar, ensuring it is close to your mouth.
   • For open-face or flip-up helmets, use the hard-wire boom microphone and attach it to the helmet's chin strap or side, positioning it near your mouth.
   • Connect the microphone to the speaker cable.
4. Připojení hlavní jednotky:
   • Připínací držák: Slide the clip between the helmet shell and the inner padding. Secure it firmly.
   • Lepicí držák: Clean the chosen surface on the helmet. Peel off the protective film from the adhesive mount and firmly press it onto the helmet for at least 30 seconds. Allow 24 hours for the adhesive to cure before attaching the unit.
5. Mount the V10 Unit: Slide the EuroFone V10 main unit onto the installed mounting bracket until it clicks into place.
6. Připojit kabely: Plug the speaker/microphone cable into the corresponding port on the EuroFone V10 main unit.

4. Návod k obsluze

4.1 Zapnutí/vypnutí

• Zapnutí: Press and hold the Power button (usually marked with a power icon) for approximately 3 seconds until you hear a voice prompt or see the LED indicator light up.
• Vypnout: Press and hold the Power button for approximately 3 seconds until you hear a voice prompt or see the LED indicator turn off.

4.2 Bluetooth Pairing with Mobile Devices

The EuroFone V10 can connect to your mobile phone, GPS, or MP3 player via Bluetooth 5.0.

1. With the unit powered off, press and hold the Power button for about 5-7 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
2. Na svém mobilním zařízení povolte Bluetooth a vyhledejte nová zařízení.
3. Select "EuroFone V10" (or similar name) from the list of available devices.
4. Once connected, the LED indicator will flash blue slowly. You will hear a confirmation tone.

After successful pairing, the headset can automatically answer calls, play music, and provide navigation information from your connected device.

Figure 3: Pairing with Cell Phone and Other Devices

This image illustrates the EuroFone V10's capability to pair with various Bluetooth devices such as mobile phones, MP3 players, and GPS units for incoming calls, music, and navigation.

4.3 Intercom Function (Multi-Rider Communication)

The V10 supports full-duplex intercom for 2 to 10 riders. The maximum intercom distance between two riders is up to 300 meters, with a group maximum of 2500 meters.

1. Zahájení interkomu: With both units powered on and not connected to a phone call, short press the Intercom button on one unit to initiate a connection with another paired unit.
2. Párování více jednotek: Follow the specific pairing instructions in the full manual for multi-unit pairing sequences. Generally, units are paired in a chain.
3. Ukončení interkomu: Dalším krátkým stisknutím tlačítka Interkom ukončíte interkomový hovor.

Figure 4: Ten Riders Full Duplex Intercom

This diagram visually represents how up to ten riders can communicate simultaneously using the full-duplex intercom feature of the EuroFone V10 headset.

4.4 Phone Calls, Music, and FM Radio

The V10 allows intelligent switching between various audio functions.

Figure 5: Intelligent Switching

This image illustrates the intelligent switching capability of the EuroFone V10, allowing seamless transitions between GPS navigation, phone calls, intercom conversations, FM radio, and music playback.

• Přijímání / ukončování hovorů: A short press of the Phone button (or Power button, depending on model variant) will answer an incoming call. Another short press will end the call.
• Odmítání hovorů: Press and hold the Phone button for 2 seconds to reject an incoming call.
• Přehrávání hudby: Once paired with a music device, short press the Play/Pause button to play or pause music. Use the Volume Up/Down buttons to adjust volume.
• FM rádio:
  • To activate FM radio, short press the FM button.
  • To scan for stations, press and hold the Volume Up/Down buttons.
  • To switch between preset stations, short press the Volume Up/Down buttons.
  • To exit FM radio, short press the FM button again.

Obrázek 6: Funkce FM rádia

This image highlights the built-in FM radio feature of the EuroFone V10, allowing users to listen to radio broadcasts while riding.

5. Údržba a péče

Proper maintenance ensures the longevity and optimal performance of your EuroFone V10 headset.

• Čištění: Použijte měkký, damp hadříkem otírejte vnější část jednotky. Nepoužívejte agresivní chemikálie ani abrazivní čisticí prostředky.
• Voděodolnost: The V10 is IP65 waterproof, meaning it is protected against dust ingress and low-pressure water jets from any direction. While it can withstand rain, avoid submerging the unit in water.
• Skladování: When not in use for extended periods, store the headset in a cool, dry place. It is recommended to charge the battery every 3 months to maintain its health.
• Teplota: Avoid exposing the unit to extreme temperatures (very hot or very cold) as this can affect battery life and electronic components.

Obrázek 7: Stupeň vodotěsnosti IP65

This image visually confirms the EuroFone V10's IP65 waterproof rating, showing it can withstand exposure to water splashes and rain.

6. Řešení problémů

If you encounter issues with your EuroFone V10, please refer to the following common problems and solutions:

Pokud problém přetrvává, kontaktujte prosím zákaznickou podporu.

7. Specifikace

8. Záruka a podpora

For warranty information and technical support, please refer to the warranty card included in your product packaging or contact the manufacturer directly.

Výrobce: SHEN ZHEN GOLDSTAR ELECTRONICS CO., LIMITED

Uschovejte si prosím doklad o koupi pro případné reklamace.